summaryrefslogtreecommitdiff
path: root/test/integration/test-apt-cdrom
AgeCommit message (Collapse)Author
2015-12-19tests: support spaces in path and TMPDIRDavid Kalnischkies
This doesn't allow all tests to run cleanly, but it at least allows to write tests which could run successfully in such environments. Git-Dch: Ignore
2015-11-04support arch:all data e.g. in separate Packages fileDavid Kalnischkies
Based on a discussion with Niels Thykier who asked for Contents-all this implements apt trying for all architecture dependent files to get a file for the architecture all, which is treated internally now as an official architecture which is always around (like native). This way arch:all data can be shared instead of duplicated for each architecture requiring the user to download the same information again and again. There is one problem however: In Debian there is already a binary-all/ Packages file, but the binary-any files still include arch:all packages, so that downloading this file now would be a waste of time, bandwidth and diskspace. We therefore need a way to decide if it makes sense to download the all file for Packages in Debian or not. The obvious answer would be a special flag in the Release file indicating this, which would need to default to 'no' and every reasonable repository would override it to 'yes' in a few years time, but the flag would be there "forever". Looking closer at a Release file we see the field "Architectures", which doesn't include 'all' at the moment. With the idea outlined above that 'all' is a "proper" architecture now, we interpret this field as being authoritative in declaring which architectures are supported by this repository. If it says 'all', apt will try to get all, if not it will be skipped. This gives us another interesting feature: If I configure a source to download armel and mips, but it declares it supports only armel apt will now print a notice saying as much. Previously this was a very cryptic failure. If on the other hand the repository supports mips, too, but for some reason doesn't ship mips packages at the moment, this 'missing' file is silently ignored (= that is the same as the repository including an empty file). The Architectures field isn't mandatory through, so if it isn't there, we assume that every architecture is supported by this repository, which skips the arch:all if not listed in the release file.
2015-08-12Replace all "press enter" occurrences with "press [Enter]"Luca Bruno
Thanks: Andre Felipe Machado for initial patch Closes: 414848
2015-06-15show item ID in Hit, Ign and Err lines as wellDavid Kalnischkies
Again, consistency is the main sellingpoint here, but this way it is now also easier to explain that some files move through different stages and lines are printed for them hence multiple times: That is a bit hard to believe if the number is changing all the time, but now that it keeps consistent.
2015-06-15call URIStart in cdrom and file methodDavid Kalnischkies
All other methods call it, so they should follow along even if the work they do afterwards is hardly breathtaking and usually results in a URIDone pretty soon, but the acquire system tells the individual item about this via a virtual method call, so even through none of our existing items contains any critical code in these, maybe one day they might. Consistency at least once… Which is also why this has a good sideeffect: file: and cdrom: requests appear now in the 'apt-get update' output. Finally - it never made sense to hide them for me. Okay, I guess it made before the new hit behavior, but now that you can actually see the difference in an update it makes sense to see if a file: repository changed or not as well.
2015-04-19ensure lists/ files have correct permissions after apt-cdrom addDavid Kalnischkies
Its a bit unpredictable which permissons and owners we will encounter on a CD-ROM (or a USB stick, as apt-cdrom is responsible for those too), so we have to ensure in this codepath as well that everything is nicely setup without waiting for a 'apt-get update' to fix up the (potential) mess.
2015-03-16test exitcode as well as string equalityDavid Kalnischkies
We use test{success,failure} now all over the place in the framework, so its only consequencial to do this in the situations in which we test for a specific output as well. Git-Dch: Ignore
2014-11-18fix file ownership tests to work on kfreebsdDavid Kalnischkies
While on linux files are created in /tmp with $USER:$USER, on my kfreebsd testmachine they are created with $USER:root, so we pull some strings here to make it work on both.
2014-11-18create our cache and lib directory always with mode 755David Kalnischkies
We autocreate for a while now the last two directories in /var/lib/apt/lists (similar for /var/cache/apt/archives) which is very nice for systems having any of those on tmpfs or other non-persistent storage. This also means though that this creation is effected by the default umask, so for people with aggressive umasks like 027 the directories will be created with 750, which means all non-root users are left out, which is usually exactly what we want then this umask is set, but the cache and lib directories contain public knowledge. There isn't any need to protect them from viewers and they render apt completely useless if not readable.
2014-10-23add test for Basic Authentication schemeDavid Kalnischkies
Git-Dch: Ignore
2014-10-23chown finished partial files earlierDavid Kalnischkies
partial files are chowned by the Item baseclass to let the methods work with them. Now, this baseclass is also responsible for chowning the files back to root instead of having various deeper levels do this. The consequence is that all overloaded Failed() methods now call the Item::Failed base as their first step. The same is done for Done(). The effect is that even in partial files usually don't belong to _apt anymore, helping sneakernets and reducing possibilities of a bad method modifying files not belonging to them. The change is supported by the framework not only supporting being run as root, but with proper permission management, too, so that privilege dropping can be tested with them.
2014-10-15Merge branch 'debian/sid' into debian/experimentalDavid Kalnischkies
The acquire code changed completely, so this is more an import of the testcase and a new fix than the merge of an existent fix. Conflicts: apt-pkg/acquire-item.cc
2014-10-15don't cleanup cdrom files in apt-get updateDavid Kalnischkies
Regression from merging 801745284905e7962aa77a9f37a6b4e7fcdc19d0 and b0f4b486e6850c5f98520ccf19da71d0ed748ae4. While fine by itself, merged the part fixing the filename is skipped if a cdrom source is encountered, so that our list-cleanup removes what seems to be orphaned files. Closes: 765458
2014-09-27use apt-key adv (+ gnupg) instead of gpgv for verifyDavid Kalnischkies
apt-key does the keyring merge as we need it, so we just call it instead of reimplementing it to do the merging before gpgv. This means we don't use gpgv anymore (we never depended on it explicitly - bad style), but it also means that the message in apt-cdrom add is a bit less friendly as it says loudly "untrusted key", but for a one-time command its okay.
2014-03-13msgstr with elipses need three dotsDavid Kalnischkies
fixes some messages and their translation so that all of them have three dots for messages with an elipse. Many translations already had this.
2014-03-13enable mount support for apt-cdrom in the testsDavid Kalnischkies
Git-Dch: Ignore
2014-03-13simplify apt-cdrom testcodeDavid Kalnischkies
Git-Dch: Ignore
2013-08-28configurable compression for testcasesDavid Kalnischkies
Compressing files in 4 different styles eats test-time for no practical gain if we don't test them explicitly, so default to just building 'gz' compressed files as it is the simplest compression algorithm supported Git-Dch: Ignore
2013-08-12add chronic-like testsuccess/testfailure helpersDavid Kalnischkies
For many commands the output isn't stable (like then dpkg is called) but the exitcode is, so this helper enhances the common && msgpass || msgfail by generating automatically a msgtest and showing the output of the command in case of failure instead of discarding it unconditionally, the later being chronic-like behaviour Git-Dch: Ignore
2013-06-09ensure state-dir exists before coyping cdrom filesDavid Kalnischkies
We do the same in the acquire system which handles the 'normal' downloads, so do it here as well even though its unlikely anyone will ever notice (beside testcases of course …)
2013-06-09tests: trap-adding can be post- as well as prefixDavid Kalnischkies
For testcases it might sometimes be handy to add trap-actions before the general cleanup, e.g. if it has set directories read- only which rm doesn't want to remove even with --force applied (its fine with files though) Git-Dch: Ignore
2013-03-18* apt-pkg/deb/debindexfile.cc,David Kalnischkies
apt-pkg/deb/deblistparser.cc: - use OpenMaybeClearSignedFile to be free from detecting and skipping clearsigning metadata in dsc and Release files We can't write a "clean" file to disk as not all acquire methods copy Release files before checking them (e.g. cdrom), so this reverts recombining, but uses the method we use for dsc files also in the two places we deal with Release files
2012-09-03* apt-pkg/cdrom.cc:David Kalnischkies
- copy only configured translation files from a CD-ROM and not all available translation files preventing new installs with d-i from being initialized with all translations (Closes: #678227) - handle Components in the reduction for the source.list as multi-arch CDs otherwise create duplicated source entries (e.g. "wheezy main main")