| Age | Commit message (Collapse) | Author |
|---|
|
Git-Dch: Ignore
|
|
This 'ignores' the component Release files you can find in Debian
alongside the binary-* directories, which isn't exactly a common
usecase, but it worked before, so lets support it again as this isn't
worse than a valid Release file which is unsigned.
Git-Dch: Ignore
|
|
Continueing on the track of dropping privileges in all methods, lets
drop it in copy, too, as the reasoning for it is very similar to file
and the interaction between the too quiet interesting as copy kinda
surfed as a fallback for file not being able to read the file. Both now
show a better error message as well as it was previously claiming to
have a hashsum mismatch, given that it couldn't read the file.
Git-Dch: Ignore
|
|
Based on a discussion with Niels Thykier who asked for Contents-all this
implements apt trying for all architecture dependent files to get a file
for the architecture all, which is treated internally now as an official
architecture which is always around (like native). This way arch:all
data can be shared instead of duplicated for each architecture requiring
the user to download the same information again and again.
There is one problem however: In Debian there is already a binary-all/
Packages file, but the binary-any files still include arch:all packages,
so that downloading this file now would be a waste of time, bandwidth
and diskspace. We therefore need a way to decide if it makes sense to
download the all file for Packages in Debian or not. The obvious answer
would be a special flag in the Release file indicating this, which would
need to default to 'no' and every reasonable repository would override
it to 'yes' in a few years time, but the flag would be there "forever".
Looking closer at a Release file we see the field "Architectures", which
doesn't include 'all' at the moment. With the idea outlined above that
'all' is a "proper" architecture now, we interpret this field as being
authoritative in declaring which architectures are supported by this
repository. If it says 'all', apt will try to get all, if not it will be
skipped. This gives us another interesting feature: If I configure a
source to download armel and mips, but it declares it supports only
armel apt will now print a notice saying as much. Previously this was a
very cryptic failure. If on the other hand the repository supports mips,
too, but for some reason doesn't ship mips packages at the moment, this
'missing' file is silently ignored (= that is the same as the repository
including an empty file).
The Architectures field isn't mandatory through, so if it isn't there,
we assume that every architecture is supported by this repository, which
skips the arch:all if not listed in the release file.
|
|
The manpage is also slightly updated to work better as a central hub to
push people from all angles into the right directions without writting a
book disguised as an error message.
|
|
Insecure (aka unsigned) repositories are bad, period. We want to get
right of them finally and as a first step we are printing scary
warnings. This is already done, this commit just changes the messages to
be more consistent and prevents them from being displayed if
authenticity is guaranteed some other way (as indicated with
trusted=yes).
The idea is to first print the pure fact like "repository isn't signed"
as a warning (and later as an error), while giving an explaination in a
immediately following notice (which is displayed only in quiet level 0:
so in interactive use, not in scripts and alike).
Closes: 796549
|
|
Not all tests work yet, most notable the cdrom tests, but those require
changes in libapt itself to have a proper fix and what we have fixed so
far is good enough progress for now.
Git-Dch: Ignore
|
|
Our error reporting is historically grown into some kind of mess.
A while ago I implemented stacking for the global error which is used in
this commit now to wrap calls to functions which do not report (all)
errors via return, so that only failures in those calls cause a failure
to propergate down the chain rather than failing if anything
(potentially totally unrelated) has failed at some point in the past.
This way we can avoid stopping the entire acquire process just because a
single source produced an error for example. It also means that after
the acquire process the cache is generated – even if the acquire
process had failures – as we still have the old good data around we can and
should generate a cache for (again).
There are probably more instances of this hiding, but all these looked
like the easiest to work with and fix with reasonable (aka net-positive)
effects.
|
|
This enables more fine grained control over such exceptions.
|
|
'files' is a bit too generic as a name for a command usually only used
programmatically (if at all) by developers, so instead of "wasting" this
generic name for this we use "indextargets" which is actually the name
of the datastructure the displayed data is stored in.
Along with this rename the config options are renamed accordingly.
|
|
It shouldn't be too common, but sometimes people have multiple mirrors
in the sources or otherwise repositories with the same content. Now that
we gracefully can handle multiple requests to the same URI, we can also
fold multiple requests with the same expected hashes into one. Note that
this isn't trying to find oppertunities for merging, but just merges if
it happens to encounter the oppertunity for it.
This is most obvious in the new testcase actually as it needs to delay
the action to give the acquire system enough time to figure out that
they can be merged.
|
|
Again, consistency is the main sellingpoint here, but this way it is now
also easier to explain that some files move through different stages and
lines are printed for them hence multiple times: That is a bit hard to
believe if the number is changing all the time, but now that it keeps
consistent.
|
|
All other methods call it, so they should follow along even if the work
they do afterwards is hardly breathtaking and usually results in a
URIDone pretty soon, but the acquire system tells the individual item
about this via a virtual method call, so even through none of our
existing items contains any critical code in these, maybe one day they
might. Consistency at least once…
Which is also why this has a good sideeffect: file: and cdrom: requests
appear now in the 'apt-get update' output. Finally - it never made sense
to hide them for me. Okay, I guess it made before the new hit behavior,
but now that you can actually see the difference in an update it makes
sense to see if a file: repository changed or not as well.
|
|
It is a rather strange sight that index items use SiteOnly which strips
the Path, while e.g. deb files are downloaded with NoUserPassword which
does not. Important to note here is that for the file transport Path is
pretty important as there is no Host which would be displayed by Site,
which always resulted in "interesting" unspecific errors for "file:".
Adding a 'middle' ground between the two which does show the Path but
potentially modifies it (it strips a pending / at the end if existing)
solves this "file:" issue, syncs the output and in the end helps to
identify which file is meant exactly in progress output and co as a
single site can have multiple repositories in different paths.
|
|
We use test{success,failure} now all over the place in the framework, so
its only consequencial to do this in the situations in which we test for
a specific output as well.
Git-Dch: Ignore
|
|
We create our own directories here and work without root in them, so we
can also test the locking with them as it is how we usually operate.
Git-Dch: Ignore
|
|
Running the testcases is usually not a good idea, but it can be handy to
check if the privilege dropping works.
Git-Dch: Ignore
|
|
I am pretty sure I did that before committing broken stuff…
Git-Dch: Ignore
|
|
consistently using Item::Failed in all specializec classes helps setting
up some information bits otherwise unset, so some errors had an empty
reason as an error. Ign is upgraded to display the error message we
ignored to further help in understanding what happens.
|
|
|
|
|
|
|
|
The configuration key Acquire::AllowInsecureRepositories controls if
apt allows loading of unsigned repositories at all.
The configuration Acquire::AllowDowngradeToInsecureRepositories
controls if a signed repository can ever become unsigned. This
should really never be needed but we provide it to avoid having
to mess around in /var/lib/apt/lists if there is a use-case for
this (which I can't think of right now).
|
|
|
|
|
