| Age | Commit message (Collapse) | Author |
|---|
|
Multi-Arch: same packages can be co-installed, but need to have the same
version for all installed packages (aka "siblings"). Otherwise the
unsynced versions will fight against each other and the auto-install as
wel as the problem resolver will later have to decide between holding the
packages or to remove one of the siblings (usually a foreign) taking a
bunch of packages (like the entire foreign setup) with them.
The idea here is now to be more pro-active: MarkInstall will fail for
a package if the siblings aren't synced, so we don't allow a situation
in which a resolver has to decide if to hold or to remove-upgrade under
the assumption that the remove-upgrade decision is always wrong and
doesn't deserve to be explored (expect valid out-of-syncs of course).
Thats a pretty bold move to take for a library which is used by
different solvers so this check is done in IsInstallOk and can be
overridden if front-ends want to.
|
|
Default is to acquire all architectures from APT::Architectures which
can be changed by arch=, but this isn't very flexible if you want
"mostly" the default as you have to hardcode the architectures then,
so arch-= and arch+= can be used to add/remove architectures from the
default set.
On a machine with 'amd64' and 'i386' configured the lines:
deb [arch+=armel] http://example.org/debian wheezy rocks
deb [arch-=amd64] http://example.org/debian jessie rocks
will result in the download of:
wheezy Packages for 'amd64', 'i386' and 'armel'
jessie Packages for 'i386'
|
|
Adds on top of Version 2 to all displayed version numbers the
architecture as well as the MultiArch flag for consumption by the hooks.
Most of the time the architecture will be the same for both versions
displayed, but packages might change from "all" to "any" (or back)
between versions so we can't display the architecture for packages.
Pseudo-Format for Version 3:
<name> <version> <arch> <m-a-flag> <compare> <version> <arch> <m-a-flag>
Examples:
stuff - - none < 1 amd64 none **CONFIGURE**
libsame 1 i386 same < 2 i386 same **CONFIGURE**
stuff 2 i386 none > 1 i386 none **CONFIGURE**
libsame 2 i386 same > - - none **REMOVE**
toolkit 1 all foreign > - - none **REMOVE**
Closes: #712116
|
|
Forking only after being ready to accept clients avoids running races
with the tests which sometimes failed on the first 'apt-get update'
(or similar) with the previous background-start and hope for the best…
The commit fixes also some oversight output-order changes in regards to
Description-md5 and (I-M-S) race conditions in various tests.
Git-Dch: Ignore
|
|
With the selfgrown splitting we got the problem of not recovering
from networks which just reply with invalid data like those sending
us login pages to authenticate with the network (e.g. hotels) back.
The good thing about the InRelease file is that we know that it must
be clearsigned (a Release file might or might not have a detached sig)
so if we get a file but are unable to split it something is seriously
wrong, so there is not much point in trying further.
The Acquire system already looks out for a NODATA error from gpgv,
so this adds a new error message sent to the acquire system in case
the splitting we do now ourselves failed including this magic word.
Closes: #712486
|
|
Git-Dch: Ignore
|
|
we have a test which required traditionally lighttpd to be executed
as it requires a webserver supporting some kind of URI rewriting.
Now with some lines of code our own webserver can do this and the
testcase can be enabled by default. This test hinted at the bug fixed
in the previous commit, so having more tests which can easily be run
is a good thing.
Git-Dch: Ignore
|
|
APT needs to acquire data in a secure fashion over an inherently
unsecure way, known as the internet, while communicating with
unreliable partners, known as webservers and proxies.
For your integration tests we so far relied on 'normal' webservers,
but all of them have certain quirks and none is able to provide us
with all quirks which can be observed in the wild and we therefore
have to test with, so this webserver isn't trying to be fast, secure
or feature complete, but to provide all the quirks we need in a
consistent way.
This webserver also makes the APT project self-contained, as it is now
able to generate, serve as well as acquire package indexes. ;)
Git-Dch: Ignore
|
|
do not blindly assume that all packages stanzas have a "Description:"
field in 'apt-cache show' as well as in the cache creation itself.
We instead assume now that if the stanza has a Description, it will not
be the first field as we look out for "\nDescription" to take care of
MD5sum as well as (maybe ignored) translated Descriptions embedded in
the package stanza.
Closes: #712435
|
|
Can't be used as a test as is, but shows how to build multiple
CD-ROMs for tests and can be used to reproduce debbug #711456.
Git-Dch: Ignore
|
|
We do the same in the acquire system which handles the 'normal'
downloads, so do it here as well even though its unlikely anyone
will ever notice (beside testcases of course …)
|
|
Git-Dch: Ignore
|
|
For testcases it might sometimes be handy to add trap-actions
before the general cleanup, e.g. if it has set directories read-
only which rm doesn't want to remove even with --force applied
(its fine with files though)
Git-Dch: Ignore
|
|
Patterns can appear in the name as well as in the description,
they don't have to match all in the name/description only.
Closes: 691453
|
|
Splits the big loop over dependencies in SmartConfigure which unpacks and
configures dependencies into two loops and reverse their order, so that all
dependencies which need to be unpacked are handled first and only after that
configures are issued for dependencies.
This is needed as otherwise the unpack of a (new) dependency will be issued
in between a configure call for two (or more) packages which form a loop,
which means the configure calls aren't part of the same dpkg call and
therefore dpkg bails out.
Such tight loops should really be avoided as they are usually wrong – and in
reality the dependencies in libreoffice were greatly simplified thanks to
Rene Engelhard so the problem is gone for the benefit of all.
Closes: 707578
|
|
|
|
Used to work until a certain (here unnamed) person came along and used
the wrong operator causing low-priority packages to be sorted above
high-priority packages while choosing a provider in commit
2b5c35c7bb915dbd46fefd7c79f05364ba22f93b from Nov 2011
|
|
|
|
|
|
|
|
|
|
|
|
apt-pkg/deb/deblistparser.cc:
- use OpenMaybeClearSignedFile to be free from detecting and
skipping clearsigning metadata in dsc and Release files
We can't write a "clean" file to disk as not all acquire methods copy
Release files before checking them (e.g. cdrom), so this reverts recombining,
but uses the method we use for dsc files also in the two places we
deal with Release files
|
|
* ftparchive/writer.cc:
- use OpenMaybeClearSignedFile to be free from detecting and
skipping clearsigning metadata in dsc files
|
|
the rest and add some more tests (by fixing commented ones)
|
|
run-tests code
|
|
|
|
- continue after test failure but preserve exit status
|
|
|
|
into data and signatures, pass it to gpgv for verification and
recombines it after that in a known-good way without unsigned blocks
and whitespaces resulting usually in more or less the same file as
before, but later code can be sure about the format
* apt-pkg/deb/debmetaindex.cc:
- reenable InRelease by default
|
|
- CVE-2013-1051
* apt-pkg/deb/debmetaindex.cc,
test/integration/test-bug-595691-empty-and-broken-archive-files,
test/integration/test-releasefile-verification:
- disable InRelease downloading until the verification issue is
fixed, thanks to Ansgar Burchardt for finding the flaw
|
|
- prefer to install packages which have an already installed M-A:same
sibling while choosing providers (LP: #1130419)
|
|
|
|
- do not call Mark{Install,Delete} from the autoremove code with
the FromUser bit set to avoid modifying the auto-installed bit
|
|
- ignore negative dependencies applying in the same group for
M-A:same packages on the real package name as self-conflicts
|
|
- ensure that dependencies for packages:none are always generated
|
|
by introducing a pseudo-architecture 'none' so that the small group of
users with these packages can get right of them without introducing too
much hassle for other users (Closes: #686346)
|
|
- copy only configured translation files from a CD-ROM and not all
available translation files preventing new installs with d-i from
being initialized with all translations (Closes: #678227)
- handle Components in the reduction for the source.list as multi-arch CDs
otherwise create duplicated source entries (e.g. "wheezy main main")
|
|
- unpack versions in case a different version from the package
is currently in unpack state to recover from broken system states
(like different file in M-A:same package and other dpkg errors)
|
|
cases we have to choose a provider by defaulting on host-arch
instead of build-arch
|
|
purely virtual and shouldn't error out cause of that
|
|
- error out on (unsatisfiable) build-deps on purly virtual packages
instead of ignoring these dependencies; thanks to Johannes Schauer
for the detailed report! (Closes: #683786)
|
|
- handle :all and :native correctly as architectures again
in the commandline parsing (regression in 0.9.7)
|
|
- remove architecture-specific arch to tuple expansion-rules as they lead
to the same tuples for different architectures (e.g. linux-arm for arm,
armel and armhf) while the dpkg-architecture code uses triples which
are different (in the first part, which we omit in our tuples), so e.g.
build-dep restrictions for armel ended up effecting armhf as well
|
|
- negative dependencies need to apply to all architectures,
but those with a specific architecture only apply to this one
|
|
- run autoclean against pkg:arch and not always against pkg:native as
this removes valid cache entries (Closes: #679371)
|
|
- arch:all packages are treated as arch:native packages, but dpkg
expects pkg:all for selections, so use the arch of the installed
version instead of the package structure if possible.
Thanks to Stepan Golosunov for the report! (Closes: #680041)
|
|
- print a friendly message in 'download' if a package can't be
downloaded (Closes: #677887)
|
|
|
|
|
