| Age | Commit message (Collapse) | Author |
|---|
|
|
|
We are able to run maintainer scripts if needed before, but we need to
set ADMINDIR to be able to call dpkg tools like dpkg-trigger inside of
them.
Git-Dch: Ignore
|
|
Commit 9ec748ff103840c4c65471ca00d3b72984131ce4 from Feb 23 last year
adds a version check after 8daf68e366fa9fa2794ae667f51562663856237c
added 8 days earlier negative points for breaks/conflicts with the
intended that only dependencies which are satisfied propagate points
(aka: old conflicts do not).
The implementation was needlessly complex and flawed through preventing
positive dependencies from gaining points like they did before these
commits making library transitions harder instead of simpler. It worked
out anyhow most of the time out of pure 'luck' (and other ways of
gaining points) or got miss attributed to being a temporary hick-up.
Closes: 774924
|
|
Your mileage may vary, but don't worry: There is more than one way to
do it, but our one size fits all is not a bigger hammer, but an entire
roundhouse kick! So brace yourself for the tl;dr: The limit is gone.*
Beware: This fixes also the problem that a double newline is
unconditionally added 'later' which is an overcommitment in case
the dsc filesize is limit-2 <= x <= limit.
* limited to numbers fitting into an unsigned long long.
Closes: 774893
|
|
The issue was that https.cc never called URIStart(), one way to
detect this is that no download progress is generated without
this call. The test now checks for this and as a side-effect will
also ensure that we do not break download progress reporting and
Acquire::{http,https}::Dl-Limit accidently.
|
|
Commit 299aea924ccef428219ed6f1a026c122678429e6 fixes the problem of
not logging terminal in case stdin & stdout are not a terminal. The
problem is that we are then trying to pass-through stdin content by
reading from the apt-process stdin and writing it to the stdin of the
child (dpkg), which works great for users who can control themselves,
but pipes and co are a bit less forgiving causing us to pass everything
to the first child process, which if the sending part of the pipe is
e.g. 'yes' we will never see the end of it (as the pipe is full at some
point and further writing blocks).
There is a simple solution for that of course: If stdin isn't a terminal,
we us the apt-process stdin as stdin for the child directly (We don't do
this if it is a terminal to be able to save the typed input in the log).
Closes: 773061
|
|
dpkg checks now for dependencies before running triggers, so that
packages can now end up in trigger states (especially those we are not
touching at all with our calls) after apt is done running.
The solution to this is trivial: Just tell dpkg to configure everything
after we have (supposely) configured everything already. In the worst
case this means dpkg will have to run a bunch of triggers, usually it
will just do nothing though.
The code to make this happen was already available, so we just flip a
config option here to cause it to be run. This way we can keep
pretending that triggers are an implementation detail of dpkg.
--triggers-only would supposely work as well, but --configure is more
robust in regards to future changes to dpkg and something we will
hopefully make use of in future versions anyway (as it was planed at the
time this and related options were implemented).
Note that dpkg currently has a workaround implemented to allow upgrades
to jessie to be clean, so that the test works before and after. Also
note that test (compared to the one in the bug) drops the await test as
its is considered a loop by dpkg now.
Closes: 769609
|
|
If we have no controlling terminal opening a terminal will make this
terminal our controller, which is a serious problem if this happens to
be the pseudo terminal we created to run dpkg in as we will close this
terminal at the end hanging ourself up in the process…
The offending open is the one we do to have at least one slave fd open
all the time, but for good measure, we apply the flag also to the slave
fd opening in the child process as we set the controlling terminal
explicitely here.
This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with
the slight twist that this usecase was silently broken before in that it
wasn't logging the output in term.log (as a pseudo terminal wasn't
created).
Closes: 772641
|
|
Real webservers (like apache) actually send an error page with a 416
response, but our client didn't expect it leaving the page on the socket
to be parsed as response for the next request (http) or as file content
(https), which isn't what we want at all… Symptom is a "Bad header line"
as html usually doesn't parse that well to an http-header.
This manifests itself e.g. if we have a complete file (or larger) in
partial/ which isn't discarded by If-Range as the server doesn't support
it (or it is just newer, think: mirror rotation).
It is a sort-of regression of 78c72d0ce22e00b194251445aae306df357d5c1a,
which removed the filesize - 1 trick, but this had its own problems…
To properly test this our webserver gains the ability to reply with
transfer-encoding: chunked as most real webservers will use it to send
the dynamically generated error pages.
(The tests and their binary helpers had to be slightly modified to
apply, but the patch to fix the issue itself is unchanged.)
Closes: 768797
|
|
If we have no controlling terminal opening a terminal will make this
terminal our controller, which is a serious problem if this happens to
be the pseudo terminal we created to run dpkg in as we will close this
terminal at the end hanging ourself up in the process…
The offending open is the one we do to have at least one slave fd open
all the time, but for good measure, we apply the flag also to the slave
fd opening in the child process as we set the controlling terminal
explicitely here.
This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with
the slight twist that this usecase was silently broken before in that it
wasn't logging the output in term.log (as a pseudo terminal wasn't
created).
Closes: 772641
|
|
Real webservers (like apache) actually send an error page with a 416
response, but our client didn't expect it leaving the page on the socket
to be parsed as response for the next request (http) or as file content
(https), which isn't what we want at all… Symptom is a "Bad header line"
as html usually doesn't parse that well to an http-header.
This manifests itself e.g. if we have a complete file (or larger) in
partial/ which isn't discarded by If-Range as the server doesn't support
it (or it is just newer, think: mirror rotation).
It is a sort-of regression of 78c72d0ce22e00b194251445aae306df357d5c1a,
which removed the filesize - 1 trick, but this had its own problems…
To properly test this our webserver gains the ability to reply with
transfer-encoding: chunked as most real webservers will use it to send
the dynamically generated error pages.
Closes: 768797
|
|
dpkg checks now for dependencies before running triggers, so that
packages can now end up in trigger states (especially those we are not
touching at all with our calls) after apt is done running.
The solution to this is trivial: Just tell dpkg to configure everything
after we have (supposely) configured everything already. In the worst
case this means dpkg will have to run a bunch of triggers, usually it
will just do nothing though.
The code to make this happen was already available, so we just flip a
config option here to cause it to be run. This way we can keep
pretending that triggers are an implementation detail of dpkg.
--triggers-only would supposely work as well, but --configure is more
robust in regards to future changes to dpkg and something we will
hopefully make use of in future versions anyway (as it was planed at the
time this and related options were implemented).
Closes: 769609
|
|
We were already considering these cases, but the code was flawed, so
that packages changing architectures are incorrectly handled and hence
the wrong architecture is used to call dpkg with, so that dpkg says the
package isn't installed (which it isn't for the requested architecture).
Closes: 770898
|
|
The bugreport itself describes the case of the ordering code detecting a
loop where none is present, but the testcase finds also cases in which
there is actually a loop and we fail to realize it. --reinstall can be
considered an interactive command through and it usually doesn't
encounter such "hard" problems (= looping essentials), so this is less
serious than it sounds at first.
Closes: 770291
|
|
apt-key given a long keyid reports just "OK" all the time, but doesn't
delete the mentioned key as it doesn't find the key.
Note: In debian/experimental this was closed with
29f1b977100aeb6d6ebd38923eeb7a623e264ffe which just added the testcase
as the rewrite of apt-key had fixed this as well.
Closes: 754436
|
|
We run dpkg on its own pty, so we can log its output and have our own
output around it (like the progress bar), while also allowing debconf
and configfile prompts to happen.
In commit 223ae57d468fdcac451209a095047a07a5698212 we changed to
constantly reopening the slave for kfreebsd. This has the sideeffect
though that in some cases slave and master will lose their connection on
linux, so that no output is passed along anymore. We fix this by having
always an fd referencing the slave open (linux), but we don't use it
(kfreebsd).
Failing to get our PTY up and running has many (bad) consequences
including (not limited to, nor all at ones or in any case) garbled ouput,
no output, no logging, a (partial) mixture of the previous items, …
This commit is therefore also reshuffling quiet a bit of the creation
code to get especially the output part up and running on linux and the
logging for kfreebsd.
Note that the testcase tries to cover some cases, but this is an
interactivity issue so only interactive usage can really be a good test.
Closes: 765687
|
|
The fd moves out of scope here anyway, so we should close it properly
instead of leaking it which will tickle down to dpkg maintainer scripts.
Closes: 767774
|
|
Only "recent" versions of dpkg support stdin for merge instead of a
file, so as a quick fix we delay calling it until we really need it
which fixes most of the problem already.
Checking for a specific dpkg version here is deemed too much work, just
like using a temporary file here and depends a too high requirement for
this minor usecase. After all, it didn't work at all before, so we break
nobody here and can fix it if someone complains (with a patch).
|
|
On travis we work with a pre-multiarch version of dpkg, so the output is
slightly different in regards to package names.
Git-Dch: Ignore
|
|
We run dpkg on its own pty, so we can log its output and have our own
output around it (like the progress bar), while also allowing debconf
and configfile prompts to happen.
In commit 223ae57d468fdcac451209a095047a07a5698212 we changed to
constantly reopening the slave for kfreebsd. This has the sideeffect
though that in some cases slave and master will lose their connection on
linux, so that no output is passed along anymore. We fix this by having
always an fd referencing the slave open (linux), but we don't use it
(kfreebsd).
Failing to get our PTY up and running has many (bad) consequences
including (not limited to, nor all at ones or in any case) garbled ouput,
no output, no logging, a (partial) mixture of the previous items, …
This commit is therefore also reshuffling quiet a bit of the creation
code to get especially the output part up and running on linux and the
logging for kfreebsd.
Note that the testcase tries to cover some cases, but this is an
interactivity issue so only interactive usage can really be a good test.
Closes: 765687
|
|
The fd moves out of scope here anyway, so we should close it properly
instead of leaking it which will tickle down to dpkg maintainer scripts.
Closes: 767774
|
|
While on linux files are created in /tmp with $USER:$USER, on my
kfreebsd testmachine they are created with $USER:root, so we pull some
strings here to make it work on both.
|
|
We autocreate for a while now the last two directories in /var/lib/apt/lists
(similar for /var/cache/apt/archives) which is very nice for systems having
any of those on tmpfs or other non-persistent storage. This also means
though that this creation is effected by the default umask, so for
people with aggressive umasks like 027 the directories will be created
with 750, which means all non-root users are left out, which is usually
exactly what we want then this umask is set, but the cache and lib
directories contain public knowledge. There isn't any need to protect
them from viewers and they render apt completely useless if not
readable.
|
|
Usually they don't provide a lot in terms of what they test, but they
help in covering many lines from strictly anecdotal commands (stats,
moo) and error messages, so that stuff which really needs to be tested,
but isn't is better visible in coverage reports.
Git-Dch: Ignore
|
|
The conversion to accept only relevant options for commands has
forgotten another one, so adding it again even through the usecase might
very well be equally good served by --print-uris.
Closes: 742578
|
|
Collect all hashes we can get from the source record and put them into a
HashStringList so that 'apt-get source' can use it instead of using
always the MD5sum.
We therefore also deprecate the MD5 struct member in favor of the list.
While at it, the parsing of the Files is enhanced so that records which
miss "Files" (aka MD5 checksums) are still searched for other checksums
as they include just as much data, just not with a nice and catchy name.
This is a cherry-pick of 1262d35 with some dirty tricks to preserve ABI.
LP: 1098738
|
|
We create our own directories here and work without root in them, so we
can also test the locking with them as it is how we usually operate.
Git-Dch: Ignore
|
|
dpkg wants to know about a package before it can be put on hold, so we
have to at least hint about its existance in the available file it
"maintaince" to know about such stuff. The simple thing would probably
be to just feed all Packages files into dpkg as well, but what would be
the point really? Exactly, so we take a shortcut here and just create
dummies in the available file if we need to which isn't going to be that
common as usually you are holding packages back and not off.
Who would have thought that a simple feature like setting a package on
hold requires more than 200 lines of code… at least with the testcase it
is now explicitly tested code.
|
|
Git-Dch: Ignore
|
|
The tool checks for debconf version before printing the info it
extracts, so that it doesn't extract data which can't be interpreted
before debconf is upgraded. It is only fair to check for this behaviour
in the tests.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
By convention, if I run a tool with --help or --version I expect it to
exit successfully with the usage, while if I do call it wrong (like
without any parameters) I expect the usage message shown with a non-zero
exit.
|
|
Git-Dch: Ignore
|
|
One word: "doh!" Commit f6d4ab9ad8a2cfe52737ab620dd252cf8ceec43d
disabled the check to prevent apt from downloading bigger patches
than the index it tries to patch. Happens rarly of course, but still.
Detected by scan-build complaining about a dead assignment.
To make up for the mistake a test is included as well.
|
|
feature/no-more-acquire-guessing
Conflicts:
apt-pkg/acquire-item.cc
|
|
Translation-* is guessed
|
|
suffix" instead of -s for compatibility with older systems
|
|
Handle Translation-* files exactly like Packages files (with the
expection that it is ok if a download of them fails). Remove all
"guessing" on apts side. This will elimimnate a bunch of errors
releated to captive portals and similar. Its also more correct
and removes another potential attack vector.
|
|
Git-Dch: Ignore
|
|
It is a very simple hashstring, which is why it isn't contributing to
the usability of a list of them, but it is also trivial to check and
calculate, so it doesn't hurt checking it either as it can combined even
with the simplest other hashes greatly complicate attacks on them as you
suddenly need a same-size hash collision, which is usually a lot harder
to achieve.
|
|
It is sometimes handy to have an installed package also in the archive,
but this was until now harder than it should as you had to duplicate the
lines, which is especially dangerous while writing the tests as it
easily happens that these two lines divert and so the same-but-different
version detection kicks in.
Git-Dch: Ignore
|
|
We can use either and some tests exercise this, but the default should
be what we want to use and that is a split out long description file
which is properly mentioned in the Release file.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
partial files are chowned by the Item baseclass to let the methods work
with them. Now, this baseclass is also responsible for chowning the
files back to root instead of having various deeper levels do this.
The consequence is that all overloaded Failed() methods now call the
Item::Failed base as their first step. The same is done for Done().
The effect is that even in partial files usually don't belong to
_apt anymore, helping sneakernets and reducing possibilities of a bad
method modifying files not belonging to them.
The change is supported by the framework not only supporting being run
as root, but with proper permission management, too, so that privilege
dropping can be tested with them.
|
|
Private temporary directories as created by e.g. libpam-tmpdir are nice,
but they are also very effective in preventing our priviledge dropping
to work as TMPDIR will be set to a directory only root has access to, so
working with it as _apt will fail. We circumvent this by extending our
check for a usable TMPDIR setting by checking access rights.
Closes: 765951
|
|
Adds a new testwarning which tests for zero exit and the presents of a
warning in the output, failing if either is not the case or if an error
is found, too. This allows us to change testsuccess to accept only
totally successful executions (= without warnings) which should help
finding regressions.
Git-Dch: Ignore
|
|
These functions check the exit code of the command, but for apt commands
we can go further and require an error message for non-zero exits and
none for zero exits.
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Adds some infrastructure to run tests automatically for certain
commands. The first command being 'apt-get update' (and 'apt update')
which check for correct permission and owner of the files in lists/.
Git-Dch: Ignore
|
|
If we get an IMS hit for an InRelease file we use the file we already
have and pass it into reverification, but this changes the permissions
and on abort of the transaction they weren't switched back.
This is now done, additionally, every file in partial which hasn't
failed gets permission and owner changed for root access as well, as it
is very well possible that the next invocation will (re)use these files.
|
