summaryrefslogtreecommitdiff
path: root/test/integration
AgeCommit message (Collapse)Author
2015-11-29do not override exact targetrelease matches with lesser matchesAndreas Cadhalpun
The relevant testcases are in test/integration/test-apt-get-source. There is a test for #731853 that is supposed to "ensure that apt will pick the higher version number" of 0.0.1 (stable) and 0.1 (stable). However, this works by pure chance, as simply reversing the order of the two insertsource lines makes the test fail. So #731853 isn't really fixed, yet. Actually, that's related to the problem I reported, as the underlying issue for both is the same: In the FindSrc function apt chooses a new 'best hit', if either * there is a target release and it matches the release of the package, * or the version of the package is higher than the last best hit. Consider having 1.0 (stable), 2.0 (unstable) and 1.5 (unstable), in this order. Looking for the version in stable, apt first selects 1.0, because the release matches the target release, but then subsequently selects 2.0, because the version is higher. Looking for the version in unstable, apt first selects 2.0, because the release matches the target release, but then subsequently selects 1.5, because the release also matches the target release. The correct way would be to choose a new 'best hit', if either * there is a target release and it matches the release of the package, * or there is no target release and the version is higher than the last best hit. Closes: 746412 Mail-Reference: <565A604B.7090104@googlemail.com> Mail-Archive: https://lists.debian.org/debian-devel/2015/11/msg00470.html
2015-11-28disable privilege-drop verification by default as fakeroot trips over itDavid Kalnischkies
Dropping privileges is an involved process for code and system alike so ideally we want to verify that all the work wasn't in vain. Stuff designed to sidestep the usual privilege checks like fakeroot (and its many alternatives) have their problem with this through, partly through missing wrapping (#806521), partly as e.g. regaining root from an unprivileged user is in their design. This commit therefore disables most of these checks by default so that apt runs fine again in a fakeroot environment. Closes: 806475
2015-11-28tests: use id to get user/group instead of environmentDavid Kalnischkies
debci seems to have a cleaner environment now and even if not we could never guess nogroup, so figure it out properly via 'id'. Git-Dch: Ignore
2015-11-25slightly rephrase notice shown for insecure repositoriesJustin B Rye
Git-Dch: Ignore
2015-11-21show potentially arch-qualified fullname in 'apt show'David Kalnischkies
We do not show the architecture as a dedicated field as this is rather technical information, but as packagename it makes sense to show the architecture as other part of apt will refer to it in this way.
2015-11-21review of new/changed translatable program stringsJustin B Rye
Reference mail: https://lists.debian.org/debian-l10n-english/2015/11/msg00006.html
2015-11-21do not sent Last-Modified if we expect a changed fileDavid Kalnischkies
In 8d041b4f we made apt figure out based on the last Release file it has if it should request a file or not given that the hashes changed or not. So if we have a last Release file and do a request, do not sent a Last-Modified header as we expect a change so much that a non-change would indeed be an error. The Last-Modified header is therefore at best ignored by the server, so sending it is just wasted effort. In the worst case as time is a fragile thing the server decides against sending us an update with the idea that we already have the latest content, which we know for a fact that we haven't. Given that we sent less information to the server our request is on its own also less identifiable as coming from a returning or new user. The disadvantage is that if we end up getting an old index file after getting a new Release file from another mirror the old mirror will not be able to tell us 'Hit', but instead sends us the complete file we discard, but both lets us end up with the same error class in the end, so the difference isn't big in practice.
2015-11-19ignore lost+found in private directory cleanupDavid Kalnischkies
In ce1f3a2c we started warning about failing unlinking, which we consistently do for directories. That isn't a problem as directories usually aren't in the places we do want to clean up – with the potential exeception of "lost+found", so lets ignore it like we ignore our own partial/ subdirectory. Closes: 805424
2015-11-19tests: use quiet level 0 by default in testsDavid Kalnischkies
Git-Dch: Ignore
2015-11-19support setting empty values (sanely) & removing support forDavid Kalnischkies
space-gapping: '-o option= value' That is a very old feature (straight from 1998), but it is super surprising if you try setting empty values and instead get error messages or a non-empty value as the next parameter is treated as the value – which could have been empty, so if for some reason you need a compatible way of setting an empty value try: '-o option="" ""'. I can only guess that the idea was to support '-o option value', but we survived 17 years without it, we will do fine in the future I guess. Similar is the case for '-t= testing' even through '-t testing' existed before and the code even tried to detect mistakes like '-t= -b' … all gone now. Technically that is as its removing a feature replacing it with another a major interface break. In practice I really hope for my and their sanity that nobody was using this; but if for some reaon you do: Remove the space and be done. I found the patch and the bugreport actually only after the fact, but its reassuring that others are puzzled by this as well and hence a thanks is in perfect order here as the patch is practical identical [expect that this one here adds tests and other bonus items]. Thanks: Daniel Hartwig for initial patch. Closes: 693092
2015-11-19do not use _apt for file/copy sources if it isn't world-accessibleDavid Kalnischkies
In 0940230d we started dropping privileges for file (and a bit later for copy, too) with the intend of uniforming this for all methods. The commit message says that the source will likely fail based on the compressors already – and there isn't much secret in the repository content. After all, after apt has run the update everyone can access the content via apt anyway… There are sources through which worked before which are mostly single-deb (and those with the uncompressed files available). The first one being especially surprising for users maybe, so instead of failing, we make it so that apt detects that it can't access a source as _apt and if so doesn't drop (for all sources!) privileges – but we limit this to file/copy, so the uncompress which might be needed will still fail – but that failed before this regression. We display a notice about this, mostly so that if it still fails (e.g. compressed) the user has some idea what is wrong. Closes: 805069
2015-11-18tests: fail testsuccess if notices are shown, tooDavid Kalnischkies
Notices are just hints, but if they are printed in tests, they should be expected and if not the test should fail. No current test has this problem, so that is just potential future proving. Git-Dch: Ignore
2015-11-05"support" unsigned Release files without hashes againDavid Kalnischkies
This 'ignores' the component Release files you can find in Debian alongside the binary-* directories, which isn't exactly a common usecase, but it worked before, so lets support it again as this isn't worse than a valid Release file which is unsigned. Git-Dch: Ignore
2015-11-05allow acquire method specific options via Binary scopeDavid Kalnischkies
Allows users who know what they are getting themselves into with this trick to e.g. disable privilege dropping for e.g. file:// until they can fix up the permissions on those repositories. It helps also the test framework and people with a similar setup (= me) to run in less modified environments.
2015-11-05drop privileges in copy:// method as we do for file://David Kalnischkies
Continueing on the track of dropping privileges in all methods, lets drop it in copy, too, as the reasoning for it is very similar to file and the interaction between the too quiet interesting as copy kinda surfed as a fallback for file not being able to read the file. Both now show a better error message as well as it was previously claiming to have a hashsum mismatch, given that it couldn't read the file. Git-Dch: Ignore
2015-11-04allow getaddrinfo flag AI_ADDRCONFIG to be disabledDavid Kalnischkies
This flags is generally handy to avoid having to deal with ipv6 results on an ipv4-only system, but it prevents e.g. the testcases from working if the testsystem has no configured address at the moment (expect loopback), so allow it to be sidestepped and let the testcases sidestep it. Git-Dch: Ignore
2015-11-04ensure FileFd doesn't try to open /dev/null as atomic and coDavid Kalnischkies
The wrapping will fail in the best case and actually end up deleting /dev/null in the worst case. Given that there is no point in trying to write atomically to /dev/null as you can't read from it again just ignore these flags if higher level code ends up trying to use them on /dev/null. Git-Dch: Ignore
2015-11-04ignore newlines in dpkg-deb control output for installing debsDavid Kalnischkies
Leading or trailing newlines can be confusing for our parser as it expects two newlines to start/stop a new stanza. To solve this the lines we wanna add are printed first, ignore any leading newlines and then add the stanza as provided by dpkg-deb with or without trailing newlines as the parser will look at the first stanza only anyway and removing trailing newlines is considerably harder to do. Closes: 802553
2015-11-04support arch:all data e.g. in separate Packages fileDavid Kalnischkies
Based on a discussion with Niels Thykier who asked for Contents-all this implements apt trying for all architecture dependent files to get a file for the architecture all, which is treated internally now as an official architecture which is always around (like native). This way arch:all data can be shared instead of duplicated for each architecture requiring the user to download the same information again and again. There is one problem however: In Debian there is already a binary-all/ Packages file, but the binary-any files still include arch:all packages, so that downloading this file now would be a waste of time, bandwidth and diskspace. We therefore need a way to decide if it makes sense to download the all file for Packages in Debian or not. The obvious answer would be a special flag in the Release file indicating this, which would need to default to 'no' and every reasonable repository would override it to 'yes' in a few years time, but the flag would be there "forever". Looking closer at a Release file we see the field "Architectures", which doesn't include 'all' at the moment. With the idea outlined above that 'all' is a "proper" architecture now, we interpret this field as being authoritative in declaring which architectures are supported by this repository. If it says 'all', apt will try to get all, if not it will be skipped. This gives us another interesting feature: If I configure a source to download armel and mips, but it declares it supports only armel apt will now print a notice saying as much. Previously this was a very cryptic failure. If on the other hand the repository supports mips, too, but for some reason doesn't ship mips packages at the moment, this 'missing' file is silently ignored (= that is the same as the repository including an empty file). The Architectures field isn't mandatory through, so if it isn't there, we assume that every architecture is supported by this repository, which skips the arch:all if not listed in the release file.
2015-11-04sanify API to get 'the' candidate versionDavid Kalnischkies
This was discussed a while ago on #debian-apt and now that I see myself making this mistake lets bite the bullet and fix it in the easy way out version: Using a new name which fits with a similar named setter and deprecate the old method instead of 'hostily' changing API. Closes: #803471
2015-11-04new quiet level -qq for apt to hide progress outputDavid Kalnischkies
-q is for logging and -qqq (old -qq) basically kills every output expect errors, so there should be a way of declaring a middleground in which the output of e.g. 'update' isn't as verbose, but still shows some things. The test framework was actually making use of by accident as it ignored the quiet level in output setup for apt before. Eventually we should figure out some better quiet levels for all tools…
2015-11-04disable updating insecure repositories in apt by defaultDavid Kalnischkies
apt is an interactive command and the reasons we haven't this option set for everything is mostly in keeping compatibility for a little while longer to allow scripts to be changed if need be.
2015-11-04move 'search' implementations as wellDavid Kalnischkies
Git-Dch: Ignore
2015-11-04add binary-specific options via Binary scopeDavid Kalnischkies
Especially with apt now, it can be useful to set an option only for apt and not for apt-get. Using a binary-specific subtree which is merged into the root seems like a simple enough trick to achieve this.
2015-11-04suggest 'apt autoremove' to get right of unneeded packagesDavid Kalnischkies
The bugreport is more conservative in asking for a conditional, but given that this is a message intended to be read by users to be run by users we should suggest using a command intended to be used by users. And while we are at, add sudo to the message – conditional of course. Closes: 801571
2015-11-04refer to apt-secure(8) in unsecure repositories warningDavid Kalnischkies
The manpage is also slightly updated to work better as a central hub to push people from all angles into the right directions without writting a book disguised as an error message.
2015-11-04rework errors and warnings around insecure repositoriesDavid Kalnischkies
Insecure (aka unsigned) repositories are bad, period. We want to get right of them finally and as a first step we are printing scary warnings. This is already done, this commit just changes the messages to be more consistent and prevents them from being displayed if authenticity is guaranteed some other way (as indicated with trusted=yes). The idea is to first print the pure fact like "repository isn't signed" as a warning (and later as an error), while giving an explaination in a immediately following notice (which is displayed only in quiet level 0: so in interactive use, not in scripts and alike). Closes: 796549
2015-11-04support .deb files in upgrade operations as wellDavid Kalnischkies
The main part is refactoring through to allow hiding the magic needed to support .deb files in deeper layers of libapt so that frontends have less exposure to Debian specific classes like debDebPkgFileIndex.
2015-11-04unbreak the copy-method claiming hashsum mismatch since ~exp9David Kalnischkies
Commit 653ef26c70dc9c0e2cbfdd4e79117876bb63e87d broke the camels back in sofar that everything works in terms of our internal use of copy:/, but external use is completely destroyed. This is kinda the reverse of what happened in "parallel" in the sid branch, where external use was mostly fine, internal and external exploded on the GzipIndexes option. We fix this now by rewriting our internal use by letting copy:/ only do what the name suggests it does: Copy files and not uncompress them on-the-fly. Then we teach copy and the uncompressors how to deal with /dev/null and use it as destination file in case we don't want to store the uncompressed files on disk. Closes: 799158
2015-11-04tests: ensure sponge-files are cleaned up properlyDavid Kalnischkies
Git-Dch: Ignore
2015-11-04tests: change test-skipping detection for arch-specific pkgsDavid Kalnischkies
dpkg-checkbuilddeps changed its exitcodes in the recent past so the old check always fails now skipping the test. Lets try a slightly more stable (at least assume it to be) variant of detecting this. See also 4f6d26b4d41474aa390329b7e9cb167eb70b2821. Git-Dch: Ignore
2015-11-04allow all dpkg selections to be set via apt-mark and libaptDavid Kalnischkies
As we have support for 'hold', we need support for undoing a hold which in effect means that we implemented most other states as well, just that they weren't exposed in the interface directly so far.
2015-11-04provide public interface to hold/unhold packagesDavid Kalnischkies
We had this code lying around in apt-mark for a while now, but other frontends need this (and similar) functionality as well, so its high time that we provide a public interface in libapt for this stuff.
2015-10-30cacheset: Fix compilation on new GCC in C++98 modeJulian Andres Klode
Since gcc 4.9, the API for erase slightly changed. In commit 3dddcdf2432e78f37c74d8c76c2c519a8d935ab2 the existing checks for __cplusplus where changed to check the gcc version, as the __cplusplus check did nothing, because gcc 4.8 already provided the standard value in there. Fix the code to check for the gcc version in two more places, and change the existing checks to use a convenience macro.
2015-09-15tests: add a -j $jobs mode to test runner for parallel executionDavid Kalnischkies
Now that tests can be run in parallel, lets actually do it… The mode has some downsides like not collecting the failed tests, but it can be a lot faster than a sequential run and is therefore a good alternative in testing those "this shouldn't break anything" changes (which tend to break everything if untested). Git-Dch: Ignore
2015-09-15tests: don't use hardcoded port for http and httpsDavid Kalnischkies
This allows running tests in parallel. Git-Dch: Ignore
2015-09-14fallback to well-known URI if by-hash failsDavid Kalnischkies
We uses a small trick to implement the fallback: We make it so, that by-hash is a special compression algorithm and apt already knows how to deal with fallback between compression algorithms. The drawback with implementing this fallback is that a) we are guessing again and more importantly b) by-hash is only tried for the first compression algorithm we want to acquire, not for all as before – but flipping between by-hash and well-known for each compression algorithm seems to be not really worth it as it seems unlikely that there will actually be mirrors who only mirror a subset of compressioned files, but have by-hash enabled. The user-experience is the usual fallback one: You see "Ign" lines in the apt update output. The fallback is implemented as a transition feature, so a (potentially huge) mirror network doesn't need a flagday. It is not meant as a "someday we might" or "we don't, but some of our mirrors might" option – we want to cut down on the 'Ign' lines front so that they become meaningful – if we wanted to spam everyone with them, we could enable by-hash by default for all repositories… sources.list and config options are better suited for this. Closes: 798919
2015-09-14add by-hash sources.list option and document all of by-hashDavid Kalnischkies
This changes the semantics of the option (which is renamed too) to be a yes/no value with the special additional value "force" as this allows by-hash to be disabled even if the repository indicates it would be supported and is more in line with our other yes/no options like pdiff which disable themselves if no support can be detected. The feature wasn't documented so far and hasn't reached a (un)stable release yet, so changing it without trying too hard to keep compatibility seems okay.
2015-09-14tests: try to support spaces in TMPDIRDavid Kalnischkies
Not all tests work yet, most notable the cdrom tests, but those require changes in libapt itself to have a proper fix and what we have fixed so far is good enough progress for now. Git-Dch: Ignore
2015-09-14deal with spaces in path, command and filepaths in apt-keyDavid Kalnischkies
Filenames we get could include spaces, but also the tmpdir we work in and the failures we print in return a very generic and unhelpful… Properly supporting spaces is a bit painful as we constructed gpg command before, which is now moved to (multilevel) calls to temporary scripts instead.
2015-09-14tests: use SHA1 checksum only by default in testsDavid Kalnischkies
This is mostly a small speedup for the testcases, but it is also handy to document which tests actually deal with a specific hash compared to those which 'just' need some hash which can be important while adding new hashes. Git-Dch: Ignore
2015-09-14do not ignore differently versioned self-providesDavid Kalnischkies
Reported-By: Konomi on IRC
2015-09-14various changes to increase test-coverageDavid Kalnischkies
And of course, testing obscure things ends up showing obscure 'bugs' or better shortcomings/inconsitencies, so lets fix them with the tests. Git-Dch: Ignore
2015-09-14implement apt-get source msg 'Please use: $vcs' for gitDavid Kalnischkies
A bit unfair that only Bzr had this message. Lets at least print it for git as well with the option of adding more later without string changes.
2015-09-14tests: use more 'native' instead of 'amd64' if possibleDavid Kalnischkies
The tests usually run on amd64 boxes, but once in a while I run it on a (slow) armel box as well, which has its fair share of problems with some tests, but at least the low hanging fruits can be dealt with: Do not assume that amd64 is the native dpkg architecture – instead use whatever dpkg thinks is native as architecture for the test. Git-Dch: Ignore
2015-09-14avoid using global PendingError to avoid failing too often too soonDavid Kalnischkies
Our error reporting is historically grown into some kind of mess. A while ago I implemented stacking for the global error which is used in this commit now to wrap calls to functions which do not report (all) errors via return, so that only failures in those calls cause a failure to propergate down the chain rather than failing if anything (potentially totally unrelated) has failed at some point in the past. This way we can avoid stopping the entire acquire process just because a single source produced an error for example. It also means that after the acquire process the cache is generated – even if the acquire process had failures – as we still have the old good data around we can and should generate a cache for (again). There are probably more instances of this hiding, but all these looked like the easiest to work with and fix with reasonable (aka net-positive) effects.
2015-09-14do not discard new manual-bits while applying EDSP solutionsDavid Kalnischkies
In private-install.cc we call MarkInstall with FromUser=true, which sets the bit accordingly, but while applying the EDSP solution we call mark install on all packages with FromUser=false, so MarkInstall believes this install is an automatic one and sets it to auto – so that a new package which is explicitely installed via an external solver is marked as auto and is hence also up for garbage collection in a following call. Ideally MarkInstall wouldn't reset it, but the detection is hard to do without regressing in other cases – and ideally ideally MarkInstall wouldn't deal with the autobit at all – so we work around this on the calling side for now.
2015-09-14implement autobit and pinning in EDSP solver 'apt'David Kalnischkies
The parser creates a preferences as well as an extended states file based on the EDSP scenario file, which isn't the most efficient way of dealing with this as thes text files have to be parsed again by another layer of the code, but it needs the least changes and works good enough for now. The 'apt' solver is in the end just a test solver like dump.
2015-09-14select kernels to protect from autoremove based on Debian versionDavid Kalnischkies
This is basically a rewrite of the script with the general idea of finding the Debian version of the installed kernels – as multiple flavours will have the same Debian version – select the two newest of them and translate them back to versions found in package names. This way we avoid e.g. kernel and kernel-rt to use up the protected slots even through they are basically the same kernel (just a different flavour) so it is likely that if kernel doesn't work for some reason, kernel-rt will not either. This also deals with foreign kernel packages, kernels on hold and partly installed kernels (in case multiple kernels are installed in the same apt run) in a hopefully sensible way. Closes: 787827
2015-09-14fix insecure use of /tmp in EDSP solver 'dump'David Kalnischkies
As said in the bugreport, this is hardly a serious problem on a security front, but it was always on the list to have the filename configurable somehow and the stable filename is a problem for parallel executions. Using an environment variable (APT_EDSP_DUMP_FILENAME) for this is more or less the best we can do here as solvers do not get told about our configuration and such. Closes: 795600