summaryrefslogtreecommitdiff
path: root/test/integration
AgeCommit message (Collapse)Author
2014-09-05Fix incorrect upgradable listing in "apt list" (thanks to Michael Musenbrock)Michael Vogt
The "apt list" command was using only the pkgDepCache but not the pkgPolicy to figure out if a package is upgradable. This lead to incorrect display of upgradable package when the user used the policy to pin-down packages. Thanks to Michael Musenbrock for the initial patch. Closes: #753297
2014-09-03test/integration/test-ubuntu-bug-346386-apt-get-update-paywall: use ↵Michael Vogt
downloadfile()
2014-09-02Add testcase for apt list --all-versionsMichael Vogt
Dch-Ignore: true
2014-09-02Avoid yielding blank lines with APT::Cmd::use-format=trueAndreas Oberritter
2014-09-02Make Proxy-Auto-Detect check for each hostMichael Vogt
When doing Acquire::http{,s}::Proxy-Auto-Detect, run the auto-detect command for each host instead of only once. This should make using "proxy" from libproxy-tools feasible which can then be used for PAC style or other proxy configurations. Closes: #759264
2014-08-26support versioned provides as implemented by dpkgDavid Kalnischkies
APT supported versioned provides for a long while in an attempt to get it working with rpm. While this support is old, we can be relatively sure that it works as versioned provides are used internally to make Multi-Arch:foreign work. Previous versions of apt will print a warning indicating that the versioned provides is ignored, so that something which "Provides: foo (= 2)" doesn't provide anything. Note that dpkg does allow only a equals-relation in the provides line as anything else is deemed too complex. apt doesn't support anything else either and such a support would require potentially big changes. Closes: 758153
2014-07-29Fix SmartConfigure to ignore ordering of packages that are already validMichael Vogt
With the change of SmartConfigure() in git commit 42d51f the ordering code was trying to re-order dependencies, even when at this point in time this was not needed. Now it will first check all targets of the given dependency and only if there is not a good one try to reorder and unpack/configure as needed. Closes: LP: #1347721
2014-07-07use printf instead of echo in testing frameworkMichele Orrù
The behaviour of echo "\tA\t" differs between dash/zsh which interprets the \t as tab and bash which prints it literally. Similar things happen for other escape sequences – without the -e flag. Switching to printf makes this more painless^Wportable, so that the tests are also working correctly with bash as sh. (commit message by committer, patch otherwise unmodified)
2014-07-07properly handle (currently unused) dpkg pass-throughDavid Kalnischkies
Git-Dch: ignore
2014-07-07use exit instead of incorrect return in test wrapperMichele Orrù
bash as sh doesn't like it, too. Git-Dch: Ignore
2014-06-18do not call resolver twice on (dist-)upgradeDavid Kalnischkies
2014-06-18Merge remote-tracking branch 'mvo/debian/sid' into debian/sidMichael Vogt
2014-06-12test/integration/test-essential-force-loopbreak: fix on non-amd64 systemsMichael Vogt
2014-06-11fix test-apt-ftparchive-cachedb-lp1274466 and apt-internal-solver testsMichael Vogt
2014-06-11fix autopkgtest testsMichael Vogt
2014-06-10fix test/integration/test-apt-ftparchive-cachedb-lp1274466 in travisMichael Vogt
2014-06-10Merge remote-tracking branch 'mvo/feature/apt-update-info' into debian/sidMichael Vogt
2014-06-10Merge remote-tracking branch ↵Michael Vogt
'mvo/bugfix/apt-get-source-unauthenticated-warning' into debian/sid
2014-06-10Merge remote-tracking branch 'mvo/bugfix/lp1274466-cache' into debian/sidMichael Vogt
2014-06-10support Acquire::GzipIndexes in dumpavailDavid Kalnischkies
Closes: 742835
2014-06-07do not revert candidate for protected packagesDavid Kalnischkies
In commit 21b3eac8 I promoted the check for installable dependencies to a pre-install check, which also reverts to a known good candidate (the installed version) if it fails. This revert was done even for user requested candidate switches which disabled our Broken detection so that install requests which are impossible to satisfy do not fail anymore, but print an (incomplete) solution proposal and then exit successfully. Closes: 745046
2014-06-04Add compat mode for old (32bit FileSize) CacheDB (LP: #1274466)Michael Vogt
2014-06-02Show unauthenticated warning for source packages as wellMichael Vogt
This will show the same unauthenticated warning for source packages as for binary packages and will not download a source package if it is unauthenticated. This can be overridden with --allow-unauthenticated Closes: #749795
2014-05-30use 'native' instead of 'amd64' as pkg archDavid Kalnischkies
Git-Dch: Ignore
2014-05-30show current/total testcase statistic also in concise modeDavid Kalnischkies
Git-Dch: Ignore
2014-05-30support parsing EDSP requests Architecture{,s} stanzaDavid Kalnischkies
Adds also a small testcase for EDSP Git-Dch: Ignore
2014-05-29(try to) fix travis-ci build failuresDavid Kalnischkies
dpkg on Ubuntu 12.04 does not seem to support parsing arch-specific dependencies, so we try to detect if we face such a dpkg in the test. In the other test the order depends on libdb, which changes per arch, so we just run it through our sorting binary and be happy (hopefully). Git-Dch: Ignore
2014-05-22fix tight loop detection and temporary removesDavid Kalnischkies
As outlined in #748355 apt segfaulted if it encountered a loop between a package pre-depending on a package conflicting with the previous as it ended up in an endless loop trying to unpack 'the other package'. In this specific case as an essential package is involved a lot of force needs to be applied, but can also be caused by 'normal' tight loops and highlights a problem in how we handle breaks which we want to avoid. The fix comes in multiple entangled changes: 1. All Smart* calls are guarded with loop detection. Some already had it, some had parts of it, some did it incorrect, and some didn't even try. 2. temporary removes to avoid a loop (which is done if a loop is detected) prevent the unpack of this looping package (we tried to unpack it to avoid the conflict/breaks, but due to a loop we couldn't, so we remove/deconfigure it instead which means we can't unpack it now) 3. handle conflicts and breaks very similar instead of duplicating most of the code. The only remaining difference is, as it should: deconfigure is enough for breaks, for conflicts we need the big hammer
2014-05-22make test independent from the actual Install-SizeDavid Kalnischkies
Git-Dch: Ignore
2014-05-22show upgradable packages after apt updateMichael Vogt
Closes: 748389
2014-05-16add an additional test for arch specific conflictsDavid Kalnischkies
In bugreport #747261 I confirmed with this testcase that apt actually supports the requested architecture-specific conflicts already since 2012 with commit cef094c2ec8214b2783a2ac3aa70cf835381eae1. The old test only does simulations which are handy to check apt, this one builds 'real' packages to see if dpkg agrees with us. Git-Dch: Ignore
2014-05-15Never parse Version/Architecture tags in a Translation-$lang fileMichael Vogt
Version/Architecture information in a Translation-$lang file is not allowed, so don't try to parse it. This is a fix for a bugreport where a Translation-en file contained the content of the regular Packages file (probably due to local FS corruption). This lead to strange error messages on file download. Thanks to Thomas Reusch for the report.
2014-05-07show progress in run-testsMichael Vogt
2014-05-07Merge remote-tracking branch 'mvo/feature/apt-ftparchive-srccache2' into ↵Michael Vogt
debian/sid
2014-04-30Only do openpty() if both stdin/stdout are terminalsMichael Vogt
Closes: 746434
2014-04-26handle pkgnames shorter than modifiersDavid Kalnischkies
The bugreport highlights the problem with an empty package name. We fix this by 'ignoring' these so that it behaves just like "apt-get install". The deeper problem is that modifier strings can be longer than a package name in which case the comparison doesn't make sense, so don't compare then. Was not noticed so far as all modifiers are of length 1, so the only package name shorter than this is in fact the empty package name. Closes: 744940
2014-04-11Merge remote-tracking branch 'mvo/feature/helpful-apt-list' into debian/sidMichael Vogt
Conflicts: test/integration/test-apt-cli-list
2014-04-11Merge remote-tracking branch 'mvo/bugfix/apt-list-rc-pkgs' into debian/sidMichael Vogt
2014-04-11consider priorities only for downloadable pkgs in resolverDavid Kalnischkies
A package which can't be downloaded anymore is very likely dropped from a release and can therefore no longer be 'standard' (or similar). We therefore do not grant points for them anymore and demote them to prio:extra instead which helps other packages breaking them away even if they have a lower priority. The testcase was initially created by Michael Vogt and just amended.
2014-04-10fix test-failure in adtMichael Vogt
2014-04-09Notice the user about "apt list -a" when only a single hit if foundMichael Vogt
If the user is using "apt list pattern" and there is only a single hit, notice about "--all-versions" as this is what the user may be interessted in
2014-04-09Fix possible race when stunnel/aptwebserver create their PID filesMichael Vogt
This patch should fix spurious test failures in jenkins or travis that are caused by a race condition in the {stunnel,aptwebserver}.pid file creation
2014-04-08fix apt list output for pkgs in dpkg ^rc stateMichael Vogt
Packages in the "deinstall ok config-file" have no candidate or instaleld version. So they must be special cased in the apt list generation.
2014-04-07make apt search case-insensitive by defaultMichael Vogt
2014-04-07ensure "--db" also works with the new srcpkgdbMichael Vogt
2014-04-04ensure clean worksMichael Vogt
2014-04-04add test for binary cachedb and contents generationMichael Vogt
2014-04-04Implement CacheDB for source packages in apt-ftparchiveMichael Vogt
2014-03-27Merge remote-tracking branch 'upstream/debian/sid' into debian/sidMichael Vogt
2014-03-27Use mkstemp() in apt-extracttemplaes (closes: #741627)Michael Vogt
Use mkstemp() in apt-extractemplates and add a integrationtest for apt-extracttemplates too. Thanks to Steve Kemp for the report.