summaryrefslogtreecommitdiff
path: root/test/integration
AgeCommit message (Collapse)Author
2016-03-06tests: expect no output while compiling noopchrootDavid Kalnischkies
This way we hopefully notice (new) warnings in this little helper. Git-Dch: Ignore
2016-03-06deal with partially downloaded changelogsDavid Kalnischkies
Changelogs are relatively small and we have no hashes for them, but we had partial support for them before, so lets stick to it. This also deletes the (partial) file before moving the downloaded file into its place – rename(2) should be doing this by itself, but testing on semaphoreci suggests that this isn't always the case (error is "Stale file handle") and we don't need an atomic replace here, so be explicit. Git-Dch: Ignore
2016-02-25Fix crash with empty architecture listJulian Andres Klode
If the architecture list is empty somehow, fail normally. LP: #1549819
2016-02-16pass versioned provides to external solvers in EDSPDavid Kalnischkies
The EDSP output generated by apt didn't include the versioned provides information so that every provides looked like an unversioned one in the eyes of an external resolver.
2016-02-11always download changelogs into /tmp firstDavid Kalnischkies
pkgAcqChangelog has the default behaviour of downloading a changelog to a temporary directory (inside /tmp, not /tmp directly), which is cleaned up on shutdown, but this can be overridden to store the changelog more permanently – but that caries a permission problem. For changelog we can 'easily' solve this by always downloading to a temporary directory and only move it out of there on done.
2016-02-11use local changelog from /usr/share/doc if possibleDavid Kalnischkies
If pkgAcqChangelog is told to acquire the changelog for a version it will check first if this version is installed on the disk and if so will use the local changelog in /usr/share/doc (possibily/likely gz compressed) instead of downloading the file from the web. An option is provided to disable this, which is enabled by default for the Ubuntu vendor as they truncate the local changelogs – and for apts --print-uris action.
2016-02-10test: use our special downloaded dir for 'source' resultDavid Kalnischkies
Otherwise the test run as root fails seeing the W: Can't drop privileges for downloading as file 'foo_1.tar.gz' couldn't be accessed by user '_apt'. - pkgAcquire::Run (13: Permission denied) warning in a command which isn't supposed to warn. One trivial test, two fixups and still counting… Git-Dch: Ignore
2016-02-10accept any tarball compression in 814139 testcaseDavid Kalnischkies
Travis still uses a dpkg version which defaults to gz and as which compression is picked isn't all to important as long as one is just accept any. Git-Dch: Ignore
2016-02-10get dpkg lock in build-dep if cache was invalid againDavid Kalnischkies
Regression introduced in a249b3e6fd798935a02b769149c9791a6fa6ef16, which in the case of an invalid cache would build the first part unlocked and later pick up the (still unlocked) cache for further processing, so the system got never locked and apt would end up complaining about being unable to release the lock at shutdown. The far more common case of having a valid cache worked as expected and hence covered up the problem – especially as tests who would have noticed it are simulations only, which do not lock. Closes: 814139 Reported-By: Balint Reczey <balint@balintreczey.hu> Reported-By: Helmut Grohne <helmut@subdivi.de> on IRC
2016-02-04test: Fix apt-key tests to work with current gpg 2.1Julian Andres Klode
2016-02-03avoid building dependency tree in 'source' commandDavid Kalnischkies
We don't need the dependencies for obvious reasons and we don't need the candidate version either, so building a pkgDepCache is wasted effort, which we can stop doing now that build-dep cleared the path.
2016-02-03use pkgCache::VS instead of pkgDepCache::VS()David Kalnischkies
The later just calls the earlier, but the later needs the fullblown dependency cache to be initialized, which is a very costly operation and isn't done anymore that early in the run as we would need to throw away and rebuild it again after we got all the information about source pkgs. As we end up with a nullptr for the pkgDepCache, we use a slightly longer calling convention to make sure that we use the pkgCache directly, avoiding nullptr induced segfaults and costly operations. Git-Dch: Ignore Reported-By: Balint Reczey <balint@balintreczey.hu>
2016-01-31test all redirection codes work as expectedDavid Kalnischkies
Git-Dch: Ignore
2016-01-27only warn about missing/invalid Date field for nowDavid Kalnischkies
The Date field in the Release file is useful to avoid allowing an attacker to 'downgrade' a user to earlier Release files (and hence to older states of the archieve with open security bugs). It is also needed to allow a user to define min/max values for the validation of a Release file (with or without the Release file providing a Valid-Until field). APT wasn't formally requiring this field before through and (agrueable not binding and still incomplete) online documentation declares it optional (until now), so we downgrade the error to a warning for now to give repository creators a bit more time to adapt – the bigger ones should have a Date field for years already, so the effected group should be small in any case. It should be noted that earlier apt versions had this as an error already, but only showed it if a Valid-Until field was present (or the user tried to used the configuration items for min/max valid-until). Closes: 809329
2016-01-26get sources for packages in multiple releases againDavid Kalnischkies
In 321213f0dcdcdaab04e01663e7a047b261400c9c Andreas Cadhalpun corrected the incorrect overriding of earlier better-fitting results with later (semi-)matches – but that broke the case in which packages are in multiple releases in the same version (and the user has both releases configured). Closes: 812497
2016-01-26parse version correctly from binary Source fieldDavid Kalnischkies
In commit a221efc331693f8905da870141756c892911c433 I promoted the source package name and version to the binary cache for faster access by e.g. EDSP, but due to changing the interpretation length to soon we always ignored the version part of the Source field, so that packages ended up having the binary version as source version – which while usually just fine it is wrong for binary rebuilds. Closes: 812492
2016-01-25fix tests run via sudo checking the history fileDavid Kalnischkies
Git-Dch: Ignore
2016-01-25reimplement build-dep via apts normal resolverDavid Kalnischkies
build-dep was implemented by parsing the build-dependencies of a package and figuring out which packages to install/remove based on this. That means that for the first level of dependencies build-dep was implementing its very own resolver with all the benefits (aka: bugs) this gives us for not using the existing resolver for all levels. Making this work involves generating a dummy binary package with fitting Depends and Conflicts and as we can't create them out of thin air the cache generation needs to be involved so we end up writing a Packages file which we want to parse – after we have parsed the other Packages files already. With .dsc/.deb files we could add them before we started parsing anything. With a bit of care we can avoid generating too much data we have to throw away again (as many parts assume that e.g. the count of packages doesn't change midair), so that on a speed front there shouldn't be much of a difference, but output can be slightly confusing as if we have a completely valid cache on disk the "Reading package lists... Done" is printed two times – but apt is pretty quick about it in that case. Closes: #137560, #444930, #489911, #583914, #728317, #812173
2016-01-25always create pkg at the time pkg:arch is createdDavid Kalnischkies
To resolve dependencies like "pkg:arch" we create a package with the name "pkg:arch" and the architecture "any". We create these packages only if a dependency needs it as these kind of dependencies aren't that common. This commit ensured that in the even this architecture specific dependency is the only relation this package has we still create the underlying package to have them available in provides resolution.
2016-01-15revert file-hash based action-merging in acquireDavid Kalnischkies
Introduced in 9d2a8a7388cf3b0bbbe92f6b0b30a533e1167f40 apt tries to merge actions like downloading the same (as judged by hashes) file into doing it once. The implementation was very simple in that it isn't planing at all. Turns out that it works 90% of the time just fine, but has issues in more complicated situations in which items can be in different stages downloading different files emitting potentially the "wrong" hash – like while pdiffs are worked on we might end up copying the patch instead of the result file giving us very strange errors in return. Reverting the change until we can implement a better planing solution seems to be the best course of action even if its sad. Closes: 810046
2016-01-14fix M-A:foreign provides creation for unknown archsDavid Kalnischkies
Architectures for packages which do not belong to the native nor a foreign architecture (dubbed barbarian for now) which are marked M-A:foreign still provide in their own architecture even if not for others. Also, other M-A:foreign (and allowed) packages provide in these barbarian architectures.
2016-01-14Do not show multiple identical apt-cache showsrc entriesMichael Vogt
Closes: #734922
2016-01-12test-apt-acquire-additional-files: Set file mode of touched filesJulian Andres Klode
This prevents a test suite failure on systems with weird umasks. Also set umask 000 at the beginning so we can actually check for that anywhere. Gbp-Dch: ignore
2016-01-12Only enable pipelining if server is HTTP/1.1Julian Andres Klode
Just enabling it for anyone breaks with HTTP/1.0 servers and proxies sometimes. Closes: #810796
2016-01-08remove uncompressed leftover partial file before pdiff bootstrapDavid Kalnischkies
The code already deals with compressed leftovers, but forgot the uncompressed files. The opertunity is picked to reorder this code and add debug messages about the actions taken as well as produce such a leftover file in the associated testcase.
2016-01-08use filesize of compressed pdiffs for the limit if possibleDavid Kalnischkies
With the addition of the $HASH-Download field in the .diff/Index we got the size of the compressed patches for 'free', so if that information is available we can use it for a more fitting calculation of the size requirements of the patches vs. the complete file. Note that this predicts a too small size in the transition case in which the information isn't available for all patches, but figuring this out would be a lot of code for practically nothing as only one update can ever be in such a transition phase.
2016-01-08tests: limit autotest-functionname generation to sane charactersDavid Kalnischkies
Some (older) versions of bash seem to be allergic to a method named "aptautotest_grep_^apt" (note the caret). Unlikely that we are going to write autotests for such commands so we could just skip those, but lets instead just use "normal" characters in the names and strip the rest as we already did with the (arguable more common) '-'.
2016-01-08support '-' and no parameter for stdin in apt-helper cat-fileDavid Kalnischkies
This way it works more similar to the compressor binaries, which we can relief in this way from their job in the test framework avoiding the need of adding e.g. liblz4-tool to the test dependencies.
2016-01-08keep compressed indexes in a low-cost formatDavid Kalnischkies
Downloading and storing are two different operations were different compression types can be preferred. For downloading we provide the choice via Acquire::CompressionTypes::Order as there is a choice to be made between download size and speed – and limited by whats available in the repository. Storage on the other hand has all compressions currently supported by apt available and to reduce runtime of tools accessing these files the compression type should be a low-cost format in terms of decompression. apt traditionally stores its indexes uncompressed on disk, but has options to keep them compressed. Now that apt downloads additional files we also deal with files which simply can't be stored uncompressed as they are just too big (like Contents for apt-file). Traditionally they are downloaded in a low-cost format (gz) as repositories do not provide other formats, but there might be even lower-cost formats and for download we could introduce higher-cost in the repositories. Downloading an entire index potentially requires recompression to another format, so an update takes potentially longer – but big files are usually updated via pdiffs which has to de- and re-compress anyhow and does it on the fly anyhow, so there is no extra time needed and in general it seems to be benefitial to invest the time in update to save time later on file access.
2016-01-08tests: try to pick up compressors from config automaticallyDavid Kalnischkies
Less hardcoding should help while introducing new compressors. Git-Dch: Ignore
2016-01-08allow pdiff bootstrap from all supported compressorsDavid Kalnischkies
There is no reason to enforce that the file we start the bootstrap with is compressed with a compressor which is available online. This allows us to change the on-disk format as well as deals with repositories adding/removing support for a specific compressor.
2016-01-08use one 'store' method to rule all (de)compressorsDavid Kalnischkies
Adding a new compressor method meant adding a new method as well – even if that boilt down to just linking to our generalized decompressor with a new name. That is unneeded busywork if we can instead just call the generalized decompressor and let it figure out which compressor to use based on the filenames rather than by program name. For compatibility we ship still 'gzip', 'bzip2' and co, but they are just links to our "new" 'store' method.
2016-01-03test-apt-cache: Adjust for hashtable size changeJulian Andres Klode
Gbp-Dch: ignore
2016-01-02Add new APT::Keep-Downloaded-Packages optionMichael Vogt
This option controls if downloaded packages should be kept after a successful install or if they should be deleted. The default for "apt-get" is that they are kept (just like before). However the default for "apt" is that they get deleted. Closes: #160743
2016-01-02properly parse comments in apt_preferences and deb822-style sourcesDavid Kalnischkies
apt_preferences and deb822-style sources used the specialized class pkgUserTagSection to deal with comments before/after a given stanza, but it couldn't deal with comments in the stanza at all. codesearch suggests that nobody else does and a vastely superior way of working with potentially commented files is implemented now, so we can officially discourage the use of the old incomplete hack class.
2016-01-02support comments in debian/control parsingDavid Kalnischkies
Now (55153bf94ff28a23318e79aa48242244c4d82b3c) that pkgTagFile can be told to deal with all sorts of comments we can use this mode to parse dsc (as by catch) and debian/control files properly even in the wake of multiline fields spliced with comments like Build-Depends. Closes: 806775
2015-12-29Fix test case that was broken by switch of hash functionJulian Andres Klode
This test relies on the ordering of the hash function.
2015-12-27allow repositories to forbid arch:all for specific index targetsDavid Kalnischkies
Debian has a Packages file for arch:all already, but the arch:any files contain arch:all packages as well, so downloading it would be a total waste of resources. Getting this solved is on the list of things to do, but it is also the hardest part – for index targets like Contents the situation is much easier and less server/client implementations are involved so we might not want to stall them. A repository can now declare via: No-Support-for-Architecture-all: Packages that even if an arch:all Packages exists, it shouldn't be downloaded, so that support for Contents files can be added now. See also 1dd20368486820efb6ef4476ad739e967174bec4 for the implementation of downloading arch:all index targets, which this is limiting. The field uses the name of the target from the apt configuration for simplicity and is negative by design as this field is intended to be supported/needed only for a "short" time (one or two Debian releases). While this commit theoretically supports any target, its expected to only see "Packages" as a value in reality.
2015-12-23ensure we got a lock in clean operationDavid Kalnischkies
We try to acquired the locks, but we didn't stop if we failed to get it… Closes: 808561
2015-12-19tests: support gpg2 properly in all testcasesDavid Kalnischkies
The output changes slightly between different versions, which we already dealt with in the main testcase for apt-key, but there are two more which do not test both versions explicitly and so still had gpg1 output to check against as this is the default at the moment. Git-Dch: Ignore
2015-12-19avoid evaluating shell in paths used in apt-keyDavid Kalnischkies
apt-key creates internally a script (since ~1.1) which it will call to avoid dealing with an array of different options in the code itself, but while writing this script it wraps the values in "", which will cause the shell to evaluate its content upon execution. To make 'use' of this either set a absolute gpg command or TMPDIR to something as interesting as: "/tmp/This is fü\$\$ing cràzy, \$(man man | head -n1 | cut -d' ' -f1)\$!" If such paths can be encountered in reality is a different question…
2015-12-19tests: support spaces in path and TMPDIRDavid Kalnischkies
This doesn't allow all tests to run cleanly, but it at least allows to write tests which could run successfully in such environments. Git-Dch: Ignore
2015-12-14test-apt-download-progress: Run the https test multiple timesJulian Andres Klode
This filters out errors due to timing issues. Early exits if enough pulses occured.
2015-12-14pkgcache: Make hash arch-independent using fixed size integerJulian Andres Klode
This helps writing test cases. Also adapt the test case that expected 64-bit. Nothing changes performance wise, the distribution of the hash values remains intact.
2015-12-14tagfile: Hardcode error message for out of range integer valuesJulian Andres Klode
This makes the test suite work on 32 bit-long platforms. Gbp-Dch: ignore
2015-12-14test framework: More noopchroot fixesJulian Andres Klode
Use asprintf() so we have easy error detection and do not depend on PATH_MAX. Do not add another separator to the generated path, in both cases the path inside the chroot is guaranteed to have a leading / already. Also pass -Wall to gcc.
2015-12-14test framework: Unset no_proxy as wellJulian Andres Klode
This caused test-bug-717891-abolute-uris-for-proxies to fail Gbp-Dch: ignore
2015-12-14test framework: Unset http proxy variables in setupenvironmentJulian Andres Klode
This breaks a lot of test cases Gbp-Dch: ignore
2015-12-14test framework: Correctly generate new paths in noopchrootJulian Andres Klode
The allocated buffer was one byte too small. Allocate a buffer of PATH_MAX instead and use snprintf(), as suggested by Martin Pitt.
2015-12-14test-apt-download-progress: Limit rate to 600kJulian Andres Klode
This reduces the chance that the test fails. Gbp-Dch: ignore