summaryrefslogtreecommitdiff
path: root/test/integration
AgeCommit message (Collapse)Author
2017-12-13implement Acquire::Retries support for all itemsDavid Kalnischkies
Moving the Retry-implementation from individual items to the worker implementation not only gives every file retry capability instead of just a selected few but also avoids needing to implement it in each item (incorrectly).
2017-12-13don't auto-switch candidate if installed is good enoughDavid Kalnischkies
If we perform candidate switching in requests like "apt install foo/bar" we should first check if the dependencies of foo from release bar are already satisfied by what is already installed before checking if the candidate (or switched candidate) would.
2017-12-13if insecure repo is allowed continue on all http errorsDavid Kalnischkies
If a InRelease file fails to download with a non-404 error we assumed there is some general problem with repository like a webportal or your are blocked from access (wrong auth, Tor, …). Turns out some server like S3 return 403 if a file doesn't exist. Allowing this in general seems like a step backwards as 403 is a reasonable response if auth failed, so failing here seems better than letting those users run into problems. What we can do is show our insecure warnings through and allow the failures for insecure repos: If the repo is signed it is easy to add an InRelease file and if not you are setup for trouble anyhow. References: cbbf185c3c55effe47f218a07e7b1f324973a8a6
2017-11-22tests: Improve handling profiling messages on CIJulian Andres Klode
We did not strip away profiling messages when we were diffing from stdin (-). Just always write temporary files and strip from them. We also had a problem when stripping ...profiling: from a line and the next line starts with profiling. Split the sed into two calls so we first remove complete profiling: lines before fixing the ...profiling: cases.
2017-11-19support COLUMNS environment variable in apt toolsDavid Kalnischkies
apt usually gets the width of the window from the terminal or failing that has a default value, but especially for testing it can be handy to control the size as you can't be sure that variable sized content will always be linebreaked as expected in the testcases.
2017-11-19allow multivalue fields in deb822 sources to be foldedDavid Kalnischkies
The documentation said "spaces", but there is no real reason to be so strict and only allow spaces to separate values as that only leads to very long lines if e.g. multiple URIs are specified which are again hard to deal with from a user PoV which the deb822 format is supposed to avoid. It also deals with multiple consecutive spaces and strange things like tabs users will surely end up using in the real world. The old behviour on encountering folded lines is the generation of URIs which end up containing all these whitespace characters which tends to mess really bad with output and further processing. Closes: 881875
2017-10-28Prevent overflow in Installed-Size (and Size) in apt showJulian Andres Klode
Installed-Size for linux-image-4.13.0-1-amd64-dbg and friends are larger than 4 GB, but read as a signed integer - that's fine so far, as the value is in KB, but it's multiplied with 1024 which overflows. So let's read it as unsigned long long instead. While we're at it, also use unsigned long long for Size, in case that is bigger than 2 GB.
2017-10-20Fix testsuite for and add new fields from dpkg 1.19Julian Andres Klode
tagfile-order.c: Add missing fields from dpkg 1.19 For binary packages, this is Build-Essential; for source packages, it is Description. test-bug-718329-...: Ignore control.tar.*, changes in dpkg 1.19 test-apt-extracttemplates: Fix for dpkg 1.19
2017-10-05ignore unsupported key formats in apt-keyDavid Kalnischkies
gpg2 generates keyboxes by default and users end up putting either those or armored files into the trusted.gpg.d directory which apt tools neither expect nor can really work with without fortifying backward compatibility (at least under the ".gpg" extension). A (short) discussion about how to deal with keyboxes happened in https://lists.debian.org/deity/2017/07/msg00083.html As the last message in that thread is this changeset lets go ahead with it and see how it turns out. The idea is here simply that we check the first octal of a gpg file to have one of three accepted values. Testing on my machines has always produced just one of these, but running into those values on invalid files is reasonabily unlikely to not worry too much. Closes: #876508
2017-09-26allow empty build-dependency fields in the parserDavid Kalnischkies
APT used to parse only wellformed files produced by repository creation tools which removed empty files as pointless before apt would see them. Now that apt can be told to parse e.g. debian/control files directly, it needs to be a little more accepting through: We had this with comments already, now let it deal with the far more trivial empty fields. Closes: #875363
2017-09-26proper error reporting for v3 onion servicesDavid Kalnischkies
APT connects just fine to any .onion address given, only if the connect fails somehow it will perform checks on the sanity of which in this case is checking the length as they are well defined and as the strings are arbitrary a user typing them easily mistypes which apt should can be slightly more helpful in figuring out by saying the onion hasn't the required length.
2017-09-24Drop curl method and apt-transport-https packageJulian Andres Klode
This automatically removes any old apt-transport-https, as apt now Breaks it unversioned.
2017-09-09ftparchive: Do not pass through disabled hashes in SourcesJulian Andres Klode
When writing a Sources files hashes that were already present in the .dsc were always copied through (or modified), even if disabled. Remove them instead when they are disabled, otherwise we end up with hashes for tarballs and stuff but not for dsc files (as the dsc obviously does not hash itself). Also adjust the tests: test-compressed-indexes relied on Files being present in showsrc, and test-apt-update-weak-hashes expected the tarball to be downloaded when an archive only has MD5 and we are requiring SHA256 because that used to work because the tarball was always included. Closes: #872963
2017-09-09add test for bug 870675 (hang on unsupported method)David Kalnischkies
Commit e250a8d8d8ef2f8f8c5e2041f7645c49fba7aa36 implemented the fix and should have included already this testcase for it. Gbp-Dch: Ignore
2017-09-09test: Workaround gpgv warningJulian Andres Klode
gpgv: WARNING: This key is not suitable for signing in --compliance=gnupg mode
2017-08-24Make test-bug-818628-unreadable-source work on !amd64Julian Andres Klode
It was broken because apt.conf.d was not readable, but that's where the architecture is defined...
2017-08-04ftparchive: sort discovered filenames before writing indexesDavid Kalnischkies
If 'apt-ftparchive packages /path/to/files/' (or sources) is used the files to include in the generated index (on stdout) were included in the order in which they were discovered, which isn't a very stable order which could lead to indexes changing without actually changing content causing needless changes in the repository changing hashsums, pdiffs, rsyncs, downloads, …. This does not effect apt-ftparchive calls which already have an order defined via a filelist (like generate) which will still print in the order given by the filelist. Note that a similar effect can be achieved by post-processing index files with apt-sortpkgs. Closes: 869557 Thanks: Chris Lamb for initial patch & Stefan Lippers-Hollmann for testing
2017-07-26suggest using auth.conf for sources with passwordsDavid Kalnischkies
The feature exists for a long while even if we get around to document it properly only now, so we should push for its adoption a bit to avoid the problems its supposed to solve like avoiding usage of non-world readable configuration files as they can cause strange behaviour for the unsuspecting user (like different solutions as root and non-root).
2017-07-26show a warning for Debian shutting down FTP servicesDavid Kalnischkies
We detect the effected sources by matching Release info – that has potential by-catch of repositories which have incorrect field values, but those are better fixed now anyhow. The bigger incorrectness is that this message will not only be printed for the Debian services itself but also for all mirrors not under Debian control but serving Debian like more local/private mirrors which will not (directly) shutdown. It is likely through that many of them will follow suite with less visible announcements or break downright if their upstream source disappears, so having false-positives here seems benefitial for the user in the end.
2017-07-26lookup login info for proxies in auth.confDavid Kalnischkies
On HTTP Connect we since recently look into the auth.conf file for login information, so we should really look for all proxies into the file as the argument is the same as for sources entries and it is easier to document (especially as the manpage already mentions it as supported).
2017-07-26reimplement and document auth.confDavid Kalnischkies
We have support for an netrc-like auth.conf file since 0.7.25 (closing 518473), but it was never documented in apt that it even exists and netrc seems to have fallen out of usage as a manpage for it no longer exists making the feature even more arcane. On top of that the code was a bit of a mess (as it is written in c-style) and as a result the matching of machine tokens to URIs also a bit strange by checking for less specific matches (= without path) first. We now do a single pass over the stanzas. In practice early adopters of the undocumented implementation will not really notice the differences and the 'new' behaviour is simpler to document and more usual for an apt user. Closes: #811181
2017-07-26show warnings instead of errors if files are unreadableDavid Kalnischkies
We used to fail on unreadable config/preferences/sources files, but at least for sources we didn't in the past and it seems harsh to refuse to work because of a single file, especially as the error messages are inconsistent and end up being silly (like suggesting to run apt update to fix the problem…). LP: #1701852
2017-07-26use FileFd to parse all apt configuration filesDavid Kalnischkies
Using different ways of opening files means we have different behaviour and error messages for them, so by the same for all we can have more uniformity for users and apt developers alike.
2017-07-26fail early in http if server answer is too small as wellDavid Kalnischkies
Failing on too much data is good, but we can do better by checking for exact filesizes as we know with hashsums how large a file should be, so if we get a file which has a size we do not expect we can drop it directly, regardless of if the file is larger or smaller than what we expect which should catch most cases which would end up as hashsum errors later now a lot sooner.
2017-07-26fail earlier if server answers with too much dataDavid Kalnischkies
We tend to operate on rather large static files, which means we usually get Content-Length information from the server. If we combine this information with the filesize we are expecting (factoring in pipelining) we can avoid reading a bunch of data we are ending up rejecting anyhow by just closing the connection saving bandwidth and time both for the server as well as the client.
2017-07-26don't try to parse all fields starting with HTTP as status-lineDavid Kalnischkies
It is highly unlikely to encounter fields which start with HTTP in practice, but we should really be a bit more restrictive here.
2017-07-26don't move failed pdiff indexes out of partialDavid Kalnischkies
The comment says this is intended, but looking at the history reveals that the comment comes from a different era. Nowadays we don't really need it anymore (and even back then it was disputeable) as we haven't used that file for our update in the end and nothing really needs this file after the update. Triggered is this by 188f297a2af4c15cb1d502360d1e478644b5b810 which moves various error conditions forward including this code expecting the file to exist – but it doesn't need to as download could have failed. We could fix that by simple checking if the file exists and only stage it if it does, but instead we don't stage it and instead even rename it out of the way with our conventional FAILED name (if it exists). That restores support for partial mirrors (= in this case mirrors which don't ship pdiff files). Note that apt heals itself even if only such a mirror is used as the update is successful even if that error is shown. Closes: 869425
2017-07-12Handle supported components with slashes in sources.listApollon Oikonomopoulos
Commit d7c92411dc1f4c6be098d1425f9c1c075e0c2154 parses the Components section of (In)Release and attempts to detect the distribution's supported components. While doing so, it handles component names with slashes in a special manner, assuming that the actual component is only the part after the final slash. This is done to handle security.debian.org, which usually appears in sources.list as follows: deb http://s.d.o/debian-security stretch/updates main contrib non-free while the actual release file has: Codename: stretch Components: updates/main updates/contrib updates/non-free While this special handing on APTs part indeed works for debian-security, it emits spurious warnings on repositories that actually use slashes in the component names *and* appear so in sources.list. We fix this by adding both component versions (whole and final part) to the SupportedComponents array. Closes: #868127
2017-07-01Ignore download order in test-apt-update-failure-propagationJulian Andres Klode
This caused spurious test failures.
2017-06-30Switch to 'http' as the default https methodJulian Andres Klode
The old curl based method is still available as 'curl', 'curl+http', and 'curl+https'.
2017-06-30Reset failure reason when connection was successfulJulian Andres Klode
When APT was trying multiple addresses, any later error somewhere else would be reported with ConnectionRefused or ConnectionTimedOut as the FailReason because that was set by early connect attempts. This causes APT to handle the failures differently, leading to some weirdly breaking test cases (like the changed one). Add debugging to the previously failing test case so we can find out when something goes wrong there again.
2017-06-28support tor+https being handled by httpDavid Kalnischkies
The apt-transport-tor package operates via simple symlinks which can result in 'http' being called as 'tor+https', so it must pick up the right configuration pieces and trigger https support also in plus names.
2017-06-28Strip 0: epochs from the version hashJulian Andres Klode
This should fix some issues with dpkg normalizing such values. Suprisingly enough apt treats the Version: field the same, even with epoch vs without, but not when searching, and does not strip the 0: from the output.
2017-06-28show a Release-Notes URI if infos were changedDavid Kalnischkies
This gives the repository owner a chance to explain why this change was needed – e.g. explaining the organisational changes or simply detailing the changes in the new release made. Note that this URI is also shown if the change is accepted, so it also draws attention to release notes of minor updates (if users watch apt output closely).
2017-06-28error in update on Release information changesDavid Kalnischkies
The value of Origin, Label, Codename and co can be used in user configuration from apts own pinning to unattended upgrades. A repository changing this values can therefore have serious effects on the behaviour of apt and other tools using these values. In a first step we will generate error messages for these changes now explaining the need for explicit confirmation and provide config options and commandline flags to accept them.
2017-06-28fail instead of warn on insecure repositories in apt-getDavid Kalnischkies
The exception was made to give (script) users a one-release grace period to adapt their setup to deal with apt enforcing signing of repositories. As we are now at the start of a new release cycle its as good a time as any to lift it now. Removes-Exception: 952ee63b0af14a534c0aca00c11d1a99be6b22b2
2017-06-28Merge branch 'feature/http-https'Julian Andres Klode
2017-06-28Skip test-apt-download-progressJulian Andres Klode
The test keeps failing continously on Ubuntu, so let's fix it for now.
2017-06-28Fix test suite and enable non-curl testing on travis, shippableJulian Andres Klode
Gbp-Dch: ignore
2017-06-28Fix https->http redirect issuesDavid Kalnischkies
Gbp-Dch: ignore
2017-06-27travis: ignore profiling warning in progress linesDavid Kalnischkies
On Travis CI running tests with code coverage enabled sometimes generates profiling lines, which we filter out for a while now, but that misses lines generated showing progress still causing test failures, so more sed logic is added in the hopes to ignore them. Extends: 58608941e6b58a46109b7cd875716b3d8054c4bf Gbp-Dch: Ignore
2017-06-26deal with 3xx httpcodes as required by HTTP/1.1 specDavid Kalnischkies
An unknown code should be handled the same as the x00 code of this group, but for redirections we used to treat 300 (and a few others) as an error while unknown codes were considered redirections. Instead we check now explicitly for the redirection codes we support for redirecting (and add the 308 defined in RFC 7538) to avoid future problems if new 3xx codes are added expecting certain behaviours. Potentially strange would have been e.g. "305 Use Proxy" sending a Location for the proxy to use – which wouldn't have worked and resulted in an error anyhow, but probably confused users in the process.
2017-06-26fail InRelease on non-404 HTTP errorcodesDavid Kalnischkies
There are very many HTTP errorcodes which indicate that the repository isn't available at the moment or the connection has some kind of problem. Given that we do not require Release files the result was that these errors were ignored and the user presented with a message like "Repository is no longer signed" which sends the user in the wrong direction. Instead of trying to figure out which http errorcodes indicate a global problem we accept only 404 for ignoring and consider all the rest as hard errors now causing us to stop instantly after the InRelease file and print the errorcode (with short description from server) received.
2017-06-26show .diff/Index properly as ignored if we fallbackDavid Kalnischkies
Moving the code responsible for parsing the Index file from ::Done into the slightly earlier ::VerifyDone allows us to still "fail" the download if we can't make use of the Index for whatever reason, so that the progress log correctly displays "Ign" instead of "Get" for the file. This also makes quiet a few debug messages proper error messages (but those are still hidden by default for Ign lines).
2017-06-26warn if an expected file can't be acquiredDavid Kalnischkies
If we couldn't find an entry for a Sources file we would generate an error while for a Packages file we would silently skip it due to assuming it is missing because it is empty. We can do better by checking if the repository declares that it supports a component we want to get the file from and if not say so and hint at the user making a typo. An example were this helps is mozilla.debian.net which dropped the firefox-aurora component (as upstream did) meaning no upgrades until the user notices manually that the repository doesn't provide packages anymore. With this commit warnings are raised hopefully causing the user to investigate what is wrong (sooner).
2017-06-26make the create-test-data script great againDavid Kalnischkies
Changes in the past to the buildsystem and the testing framework broke this little helper script – lets fix those problems to restore functionality. Gbp-Dch: Ignore
2017-06-26Show permission error if ProxyAutoDetect cmd can't be executedDavid Kalnischkies
As the proxy commands are not executed as root, a user can run into permission errors (s)he isn't expecting – as our switching is an implementation detail – so the error message in that case should really be better than a generic "error code 100" sending the user in the wrong direction as that implies the command was executed, but errored out. Closes: 857885
2017-06-26Call update from apt-key test for a strange path testDavid Kalnischkies
We setup a "horrible" environment in the apt-key testcase to check all kinds of things, but we really should be making also at least a simple apt update call, as that in turn will call apt-key which is how apt-key is used in the non-testcase world, so that calling should be able to deal with such environments as well. Gbp-Dch: Ignore
2017-06-26Add a few more Auto-Detect-Proxy testsDavid Kalnischkies
Gbp-Dch: Ignore
2017-06-26tests: fix gpg-agent killing in testcasesDavid Kalnischkies
We want to kill the agent if its home directory exists at that location, not if it isn't there (leaving an army of processes around). Gbp-Dch: Ignore