summaryrefslogtreecommitdiff
path: root/test/libapt
AgeCommit message (Collapse)Author
2016-06-10don't leak an FD in lz4 (de)compressionDavid Kalnischkies
Seen first in #826783, but as this buglog also shows leaked uncompressed files as well we don't close it just yet.
2016-05-28accept only the expected UTC timezones in date parsingDavid Kalnischkies
HTTP/1.1 hardcodes GMT (RFC 7231 §7.1.1.1) and what is good enough for the internet must be good enough for us™ as we reuse the implementation internally to parse (most) dates we encounter in various places like the Release files with their Date and Valid-Until header fields. Implementing a fully timezone aware parser just feels too hard for no effective benefit as it would take 5+ years (= until LTS's are out of fashion) until a repository could use non-UTC dates and expect it to work. Not counting non-apt implementations which might or might not only want to encounter UTC here as well. As a bonus, this eliminates the use of an instance of setlocale in libapt. Closes: 819697
2016-05-27fix and document on the fly compressor configDavid Kalnischkies
libapt allows to configure compressors to be used by its system via configuration implemented in 03bef78461c6f443187b60799402624326843396, but that was never really documented and also only partly working, which also explains why the tests weren't using it…
2016-04-25properly format multiline error messagesDavid Kalnischkies
2016-03-19tests: reenable basic auth test and add @ in usernameDavid Kalnischkies
On launchpad #1558484 a user reports that @ in the authentication tokens parsing of sources.list isn't working in an older (precise) version. It isn't the recommended way of specifying passwords and co (auth.conf is), but we can at least test for regressions (and in this case test at all… who was that "clever" boy disabling a test with exit……… oh, nevermind. Git-Dch: Ignore
2016-03-13Do not consider SHA1 usableJulian Andres Klode
SHA1 is not reasonably secure anymore, so we should not consider it usable anymore. The test suite is adjusted to account for this.
2016-02-10test that seeking to a position earlier in the file worksJulian Andres Klode
This tests the fix for #812994, #813000 Gbp-Dch: ignore
2016-01-31support <libc>-<kernel>-<cpu> in architecture specsDavid Kalnischkies
APT has a different understanding than dpkg (#748936) what matches and what doesn't match an architecture specification as it isn't converting back (and forward) to Debian triplets. That has to eventually be solved some way or the other, but until that happens we change the matching in apt so that porters can continue their work on non-gnu libc-ports even if policy doesn't specify that yet (and dpkg just supporting it "by accident" via triplets). The initial patch was reformatted, fixed in terms of patterns containing "any-any", dealing with expanding an arch without libc to gnu while a pattern expands libc to any, the parsedepends test was fixed (the new if's were inserted one step too early) and another test just for the specifications added. Closes: #812212 Thanks: Bálint Réczey for initial patch
2016-01-26stablize gtest testcase environmentDavid Kalnischkies
Avoid the dependency on a specific current path for the tar test and ensure that _system is correctly initialized (gcc-6 runs into a segfault otherwise and with it fixed starts to depend on the multi-arch configuration of the running system… not good). Git-Dch: Ignore
2016-01-15string_view: Drop constexpr constructor for standard compatibilityJulian Andres Klode
APT::StringView is supposed to be a temporary measure, until support for the standardized string_view is widely available. Introducing additional unstandardized features just makes porting to the standard version harder. The constexpr constructor also won't have any real effect on most systems, as the compiler will happily optimise the strlen() call away for constant strings. Gbp-Dch: ignore
2016-01-15provide a constexpr char[] overload for APT::StringViewDavid Kalnischkies
The commit also adds a few trivial tests Git-Dch: Ignore
2016-01-02add optional support for comments in pkgTagFileDavid Kalnischkies
APT usually deals with perfectly formatted files generated automatically be other programs – and as it has to parse multiple MBs of such files it tries to be fast rather than forgiving. This was always a problem if we reused this parser for files with a deb822 syntax which are mostly written by hand however, like apt_preferences or the deb822-style sources as these can include stray newlines and more importantly comments all over the place. As a stopgap we had pkgUserTagSection which deals at least with comments before and after a given stanza, but comments in between weren't really supported and now that we support parsing debian/control for e.g. build-dep we face the full comment problem e.g. with comments inbetween multi-line fields (like Build-Depends). We can't easily deal with this on the pkgTagSection level as the interface gives access to 'raw' char-pointers for performance reasons so we would need to optionally add a buffer here on which we could remove comments to hand out pointers into this buffer instead. The interface is quite large already and supports writing stanzas as well, which does not support comments at all either. So while in future it might make sense to have a parser setup which deals with and keeps comments in this commit we opt for the simpler solution for now: We officially declare that pkgTagSection does not support comments and instead expect the caller to deal with them, which in our case is pkgTagFile: pkgTagFile is extended with an additional mode which can deal with comments by dropping them from the buffer which will later form the input of pkgTagSection. The actual implementation is slightly more complex than this sentence suggests at first on one hand to have good performance and on the other to allow jumping directly to stanzas with offsets collected in a previous run (like our cache generation does it for example).
2015-12-27deal with empty values properly in deb822 parserDavid Kalnischkies
Regression introduced in 8710a36a01c0cb1648926792c2ad05185535558e, but such fields are unlikely in practice as it is just as simple to not have a field at all with the same result of not having a value. Closes: 808102
2015-12-19Fix FileUtlTest.GetTempDir failure when run as rootPino Toscano
Testing /usr as TMPDIR assumes that GetTempDir() cannot use it because it cannot write to it; this is true for non-root users, but not so much for root. Since root can access everything, perform this particular test case only when not running as root. Closes: #808383
2015-12-10Do not swap required and important in pkgCache::Priority()Julian Andres Klode
required and important were swapped, leading to wrong output. Closes: #807523 Thanks: Manuel A. Fernandez Montecelo for discovering this
2015-11-27outsmart gcc -O3 over-optimization in pkgCdrom::FindPackagesDavid Kalnischkies
Seems like a simpler workaround than forcing a lower optimization level just for this for all of apt. See also: https://bugs.launchpad.net/ubuntu/+source/gcc-5/+bug/1473674
2015-11-19support setting empty values (sanely) & removing support forDavid Kalnischkies
space-gapping: '-o option= value' That is a very old feature (straight from 1998), but it is super surprising if you try setting empty values and instead get error messages or a non-empty value as the next parameter is treated as the value – which could have been empty, so if for some reason you need a compatible way of setting an empty value try: '-o option="" ""'. I can only guess that the idea was to support '-o option value', but we survived 17 years without it, we will do fine in the future I guess. Similar is the case for '-t= testing' even through '-t testing' existed before and the code even tried to detect mistakes like '-t= -b' … all gone now. Technically that is as its removing a feature replacing it with another a major interface break. In practice I really hope for my and their sanity that nobody was using this; but if for some reaon you do: Remove the space and be done. I found the patch and the bugreport actually only after the fact, but its reassuring that others are puzzled by this as well and hence a thanks is in perfect order here as the patch is practical identical [expect that this one here adds tests and other bonus items]. Thanks: Daniel Hartwig for initial patch. Closes: 693092
2015-11-19do not use _apt for file/copy sources if it isn't world-accessibleDavid Kalnischkies
In 0940230d we started dropping privileges for file (and a bit later for copy, too) with the intend of uniforming this for all methods. The commit message says that the source will likely fail based on the compressors already – and there isn't much secret in the repository content. After all, after apt has run the update everyone can access the content via apt anyway… There are sources through which worked before which are mostly single-deb (and those with the uncompressed files available). The first one being especially surprising for users maybe, so instead of failing, we make it so that apt detects that it can't access a source as _apt and if so doesn't drop (for all sources!) privileges – but we limit this to file/copy, so the uncompress which might be needed will still fail – but that failed before this regression. We display a notice about this, mostly so that if it still fails (e.g. compressed) the user has some idea what is wrong. Closes: 805069
2015-11-05encode UTF-8 characters correctly in QuoteStringDavid Kalnischkies
Limit the field length to a char to avoid bogus FF for utf-8 characters with the default length. Closes: 799123
2015-11-05apply various suggestions made by cppcheckDavid Kalnischkies
Reported-By: cppcheck Git-Dch: Ignore
2015-11-04ensure FileFd doesn't try to open /dev/null as atomic and coDavid Kalnischkies
The wrapping will fail in the best case and actually end up deleting /dev/null in the worst case. Given that there is no point in trying to write atomically to /dev/null as you can't read from it again just ignore these flags if higher level code ends up trying to use them on /dev/null. Git-Dch: Ignore
2015-11-04support arch:all data e.g. in separate Packages fileDavid Kalnischkies
Based on a discussion with Niels Thykier who asked for Contents-all this implements apt trying for all architecture dependent files to get a file for the architecture all, which is treated internally now as an official architecture which is always around (like native). This way arch:all data can be shared instead of duplicated for each architecture requiring the user to download the same information again and again. There is one problem however: In Debian there is already a binary-all/ Packages file, but the binary-any files still include arch:all packages, so that downloading this file now would be a waste of time, bandwidth and diskspace. We therefore need a way to decide if it makes sense to download the all file for Packages in Debian or not. The obvious answer would be a special flag in the Release file indicating this, which would need to default to 'no' and every reasonable repository would override it to 'yes' in a few years time, but the flag would be there "forever". Looking closer at a Release file we see the field "Architectures", which doesn't include 'all' at the moment. With the idea outlined above that 'all' is a "proper" architecture now, we interpret this field as being authoritative in declaring which architectures are supported by this repository. If it says 'all', apt will try to get all, if not it will be skipped. This gives us another interesting feature: If I configure a source to download armel and mips, but it declares it supports only armel apt will now print a notice saying as much. Previously this was a very cryptic failure. If on the other hand the repository supports mips, too, but for some reason doesn't ship mips packages at the moment, this 'missing' file is silently ignored (= that is the same as the repository including an empty file). The Architectures field isn't mandatory through, so if it isn't there, we assume that every architecture is supported by this repository, which skips the arch:all if not listed in the release file.
2015-11-04revamp all tools help messagesDavid Kalnischkies
The general idea is: A small paragraph on the tool itself as a description, a list of the most used (!= all) commands available in the tool, a remark where to find more information on the tool and its commands (aka: in the manpage) and finally a common block referring to even more manpages. In exchange options are completely omitted from the output as well as deprecated or obscure commands. (Better) Information about them is available in the manpages anyway and the few options which were listed before were also the least interesting ones (-o -c -q and co are hardly of interest for someone totally new looking to find info by asking for help and anyone with a bit of experience doesn't need this short list. Those would need a list of options applying to the command they call, but they are too numerous and command specific to list them sanely in this context.
2015-11-04move apts cmdline helper type into -privateDavid Kalnischkies
Its not as simple as I initially thought to abstract this enough to make it globally usable, so lets not pollute global namespace with this for now. Git-Dch: Ignore
2015-11-04generate commands array after config is loadedDavid Kalnischkies
This ensures that location strings loaded from a location specified via configuration (Dir::Locale) effect the help messages for commands. Git-Dch: Ignore
2015-11-04add binary-specific options via Binary scopeDavid Kalnischkies
Especially with apt now, it can be useful to set an option only for apt and not for apt-get. Using a binary-specific subtree which is merged into the root seems like a simple enough trick to achieve this.
2015-09-14srv test: do 100 pulls twice and compare listDavid Kalnischkies
The previous implementation was still a bit unstable in terms of failing at times. Lets try if we have more luck with this one. Git-Dch: Ignore
2015-09-01use clock() as source for SRV randomnessDavid Kalnischkies
Initializing a random number generator with the time since epoch could be good enough, but reaches its limits in test code as the 100 iterations might very well happen in the same second and hence the seed number is always the same… clock() has a way lower resolution so it changes more often and not unimportant: If many users start the update at the same time it isn't to unlikely the SRV record will be ordered in the same second choosing the same for them all, but it seems less likely that the exact same clock() time has passed for them. And if I have to touch this, lets change a few other things as well to make me and/or compilers a bit happier (clang complained about the usage of a GNU extension in the testcase for example).
2015-09-01use unusable-for-security hashes for integrity checksDavid Kalnischkies
We want to declare some hashes as not enough for security, so that a user will need --allow-unauthenticated or similar to get data secured only by those hashes, but we can still us these hashes for integrity checks if we got them.
2015-08-27Add test for using ExtractTar on compressed filesJulian Andres Klode
Git-Dch: ignore
2015-08-20Add basic (non weight adjusted) shuffling for SrvRecords selectionMichael Vogt
Also add "Debug::Acquire::SrvRecs" debug option and the option "Acquire::EnableSrvRecods" to allow disabling this lookup.
2015-08-10add c++11 override marker to overridden methodsDavid Kalnischkies
C++11 adds the 'override' specifier to mark that a method is overriding a base class method and error out if not. We hide it in the APT_OVERRIDE macro to ensure that we keep compiling in pre-c++11 standards. Reported-By: clang-modernize -add-override -override-macros Git-Dch: Ignore
2015-08-10bring back deb822 sources.list entries as .sourcesDavid Kalnischkies
Having two different formats in the same file is very dirty and causes external tools to fail hard trying to parse them. It is probably not a good idea for them to parse them in the first place, but they do and we shouldn't break them if there is a better way. So we solve this issue for now by giving our deb822 format a new filename extension ".sources" which unsupporting applications are likely to ignore an can begin gradually moving forward rather than waiting for the unknown applications to catch up. Currently and for the forseeable future apt is going to support both with the same feature set as documented in the manpage, with the longtime plan of adopting the 'new' format as default, but that is a long way to go and might get going more from having an easier time setting options than from us pushing it explicitely.
2015-08-10fix memory leaks reported by -fsanitizeDavid Kalnischkies
Various small leaks here and there. Nothing particularily big, but still good to fix. Found by the sanitizers while running our testcases. Reported-By: gcc -fsanitize Git-Dch: Ignore
2015-08-10some CXXFLAGS housekeepingDavid Kalnischkies
More warnings are always better. Git-Dch: Ignore
2015-08-10fileutl_test.cc: Check for /etc/passwd instead of /bin/shJulian Andres Klode
This fixes the tests on systems where usrmerge is installed. Gbp-dch: ignore
2015-06-16add d-pointer, virtual destructors and de-inline de/constructorsDavid Kalnischkies
To have a chance to keep the ABI for a while we need all three to team up. One of them missing and we might loose, so ensuring that they are available is a very tedious but needed task once in a while. Git-Dch: Ignore
2015-06-11show URI.Path in all acquire item descriptionsDavid Kalnischkies
It is a rather strange sight that index items use SiteOnly which strips the Path, while e.g. deb files are downloaded with NoUserPassword which does not. Important to note here is that for the file transport Path is pretty important as there is no Host which would be displayed by Site, which always resulted in "interesting" unspecific errors for "file:". Adding a 'middle' ground between the two which does show the Path but potentially modifies it (it strips a pending / at the end if existing) solves this "file:" issue, syncs the output and in the end helps to identify which file is meant exactly in progress output and co as a single site can have multiple repositories in different paths.
2015-06-09rework hashsum verification in the acquire systemDavid Kalnischkies
Having every item having its own code to verify the file(s) it handles is an errorprune process and easy to break, especially if items move through various stages (download, uncompress, patching, …). With a giant rework we centralize (most of) the verification to have a better enforcement rate and (hopefully) less chance for bugs, but it breaks the ABI bigtime in exchange – and as we break it anyway, it is broken even harder. It shouldn't effect most frontends as they don't deal with the acquire system at all or implement their own items, but some do and will need to be patched (might be an opportunity to use apt on-board material). The theory is simple: Items implement methods to decide if hashes need to be checked (in this stage) and to return the expected hashes for this item (in this stage). The verification itself is done in worker message passing which has the benefit that a hashsum error is now a proper error for the acquire system rather than a Done() which is later revised to a Failed().
2015-05-11rewrite all TFRewrite instances to use the new pkgTagSection::WriteDavid Kalnischkies
While it is mostly busywork to rewrite all instances it actually fixes bugs as the data storage used by the new method is std::string rather than a char*, the later mostly created by c_str() from a std::string which the caller has to ensure keeps in scope – something apt-ftparchive actually didn't ensure and relied on copy-on-write behavior instead which c++11 forbids and hence the new default gcc abi doesn't use it.
2015-05-11implement a more c++-style TFRewrite alternativeDavid Kalnischkies
TFRewrite is okay, but it has obscure limitations (256 Tags), even more obscure bugs (order for renames is defined by the old name) and the interface is very c-style encouraging bad usage like we do it in apt-ftparchive passing massive amounts of c_str() from std::string in. The old-style is marked as deprecated accordingly. The next commit will fix all places in the apt code to not use the old-style anymore.
2015-05-11do not require installed libapt-pkg-dev for gtestDavid Kalnischkies
Git-Dch: Ignore
2015-04-19calculate only expected hashes in methodsDavid Kalnischkies
Methods get told which hashes are expected by the acquire system, which means we can use this list to restrict what we calculate in the methods as any extra we are calculating is wasted effort as we can't compare it with anything anyway. Adding support for a new hash algorithm is therefore 'free' now and if a algorithm is no longer provided in a repository for a file, we automatically stop calculating it. In practice this results in a speed-up in Debian as we don't have SHA512 here (so far), so we practically stop calculating it.
2015-04-19demote missing gtest to a buildtime warningDavid Kalnischkies
We just need it for unit tests and our debian/rules file actually skips calling them if nocheck is given… but this fails anyhow as we declared a hard-dependency on it. Demoting the error to a warning in configuration and adding a test in the 'make test' path with a friendly message allows nocheck to be useful again. (Running unit tests is fully encouraged of course, but bootstrappers and co do not need to be burdened with this stuff)
2015-04-10add a simple unit test for acquire progressDavid Kalnischkies
This isn't testing much of the 'complex' parts, but its better than nothing for now. Git-Dch: Ignore
2015-04-10reimplement the last uses of sprintfDavid Kalnischkies
Working with strings c-style is complicated and error-prune, so by converting to c++ style we gain some simplicity and avoid buffer overflows by later extensions. Git-Dch: Ignore
2014-11-08(style) Variable 'res' is assigned a value that is never usedDavid Kalnischkies
Checking the return value of this (and many other calls) in this testcase is a good idea, so we do it now. Reported-By: cppcheck Git-Dch: Ignore
2014-11-08Division by result of sizeof(). memset() expects a size in bytesDavid Kalnischkies
"did you intend to multiply instead?" is what cppcheck helpful says and it is absolutely right. Doesn't make a whole lot of a difference though as we are talking about 'char' in this testcase, but just to be sure. Reported-By: cppcheck Git-Dch: Ignore
2014-11-08tests: silence clang on uninitilized variablesDavid Kalnischkies
The testcases have far worse problems if these ever end up being NULL and/or are not given a value by the method called, but clang is right to warn about it, just that we don't want to fix it in testcases… Git-Dch: Ignore
2014-10-26rewrite ReadMessages()David Kalnischkies
Central methods of our infrastructure like this one responsible for communication with our methods shouldn't be more complicated then they have to and not claim to have (albeit unlikely) bugs. While I am not sure about having improved the first part, the bug is now gone and a few explicit tests check that it stays that way, so nobody will notice the difference (hopefully) – expect that this should a very tiny bit faster as well as we don't manually proceed through the string. Git-Dch: Ignore