summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2015-08-10move manual-bit from 'oldlibs' pkg to its dependenciesDavid Kalnischkies
oldlibs used to be in APT::Never-MarkAuto-Sections so that old transition packages can be removed without causing the then (autoinstalled) renamed package to be autoremoved. It isn't ideal through as ideally you want the oldlibs package to be removed after nothing depends on it anymore regardless of if you have once installed it by hand or not – and if you had the package talking over (the dependencies) should carry the manual bit now as they are the real deal now. As an added bonus if the package has no dependencies because it is an oldlibs without a direct replacement you should move away from (like lib1 and lib2 are currently in the archive, but there will hopefully only be lib2 in the release) you get a lib1 marked as auto. If the user still needs the oldlibs package for some reason all he has to do is mark it as manual once as this move is only performed if a installed package changes its section from a not-Move-Autobit-Sections to a Move-Autobit-Sections.
2015-08-10move APT::Never-MarkAuto-Sections handling to MarkDeleteDavid Kalnischkies
Having the handling in MarkInstall means that it just effects installation of the metapackage, but if the dependencies change the new dependencies aren't protected (and the old dependencies are still protected for no 'reason'). Having it in MarkDelete means that if a metapackage is sheduled for removal all its currently installed dependencies are marked as manual, which helps against both as in this case there is no new/old and additionally if a user decides the installation of a metapackage was wrong he can just remove it explicitely avoid the manual marking entirely.
2015-08-10no value for MultiArch field is 'no', not 'none'David Kalnischkies
Git-Dch: Ignore
2015-08-10mark again deps of pkgs in APT::Never-MarkAuto-Sections as manualDavid Kalnischkies
In 50ef3344c3afaaf9943142906b2f976a0337d264 (and similar for other branches), while 'fixing' the edgecase of a package being in multiple sections (e.g. moved from libs to oldlibs in newer releases) I accidently broke the feature itself completely by operating on the package itself and no longer on its dependencies… The behaviour isn't ideal in multiple ways, which we are hopefully able to fix with new ideas as mentioned in the buglog, but until then the functionality of this "hack" should be restored. Reported-By: Raphaël Hertzog <hertzog@debian.org> Tested-By: Adam Conrad <adconrad@ubuntu.com> Closes: 793360 LP: 1479207 Thanks: Raphaël Hertzog and Adam Conrad for detailed reports and initial patches
2015-08-10drop extra newline in 'Failed to fetch' and 'GPG error' messageDavid Kalnischkies
I never understood why there is an extra newline in those messages, so now is as good time as any to drop them. Lets see if someone complains with a good reason to keep it…
2015-08-10enhance "hit paywall" error message to mention the probable causeDavid Kalnischkies
Reporting errors from Done() is bad for progress reporting and such, so factoring this out is a good idea and we start with moving the supposed- to-be clearsigned file isn't clearsigned out first – improving the error message in the process as we use the same message for a similar case (NODATA) as this is what I have to look at with the venue wifi at DebCamp and the old errormessage doesn't really say anything.
2015-08-10parse packages from all architectures into the cacheDavid Kalnischkies
Now that we can dynamically create dependencies and provides as needed rather than requiring to know with which architectures we will deal before running we can allow the listparser to parse all records rather than skipping records of "unknown" architectures. This can e.g. happen if a user has foreign architecture packages in his status file without dpkg knowing about this architecture (or apt configured in this way). A sideeffect is that now arch:all packages are (correctly) recorded as available from any Packages file, not just from the native one – which has its downsides for the resolver as mixed-arch source packages can appear in different architectures at different times, but that is the problem of the resolver and dealing with it in the parser is at best a hack (and also depends on a helpful repository). Another sideeffect is that his allows :none packages to appear in Packages files again as we don't do any kind of checks now, but given that they aren't really supported (anymore) by anyone we can live with that.
2015-08-10elimate duplicated code in pkgIndexFile subclassesDavid Kalnischkies
Trade deduplication of code for a bunch of new virtuals, so it is actually visible how the different indexes behave cleaning up the interface at large in the process. Git-Dch: Ignore
2015-08-10add volatile sources support in libapt-pkgDavid Kalnischkies
Sources are usually defined in sources.list (and co) and are pretty stable, but once in a while a frontend might want to add an additional "source" like a local .deb file to install this package (No support for 'real' sources being added this way as this is a multistep process). We had a hack in place to allow apt-get and apt to pull this of for a short while now, but other frontends are either left in the cold by this and/or the code for it looks dirty with FIXMEs plastering it and has on top of this also some problems (like including these 'volatile' sources in the srcpkgcache.bin file). So the biggest part in this commit is actually the rewrite of the cache generation as it is now potentially a three step process. The biggest problem with adding support now through is that this makes a bunch of previously mostly unusable by externs and therefore hidden classes public, so a bit of further tuneing on this now public API is in order…
2015-08-10just-in-time creation for (explicit) negative depsDavid Kalnischkies
Now that we deal with provides in a more dynamic fashion the last remaining problem is explicit dependencies like 'Conflicts: foo' which have to apply to all architectures, but creating them all at the same time requires us to know all architectures ending up in the cache which isn't needed to be the same set as all foreign architectures. The effect is visible already now through as this prevents the creation of a bunch of virtual packages for arch:all packages and as such also many dependencies, just not very visible if you don't look at the stats… Git-Dch Ignore
2015-08-10just-in-time creation for (implicit) ProvidesDavid Kalnischkies
Expecting the worst is easy to code, but has its disadvantages e.g. by creating package structures which otherwise would have never existed. By creating the provides instead at the time a package structure is added we are well prepared for the introduction of partial architectures, massive amounts of M-A:foreign (and :allowed) and co as far as provides are concerned at least. We have something relatively similar for dependencies already. Many tests are added for both M-A states and the code cleaned to properly support implicit provides for foreign architectures and architectures we 'just' happen to parse. Git-Dch: Ignore
2015-08-10hide implicit deps in apt-cache again by defaultDavid Kalnischkies
Before MultiArch implicits weren't a thing, so they were hidden by default by definition. Adding them for MultiArch solved many problems, but having no reliable way of detecting which dependency (and provides) is implicit or not causes problems everytime we want to output dependencies without confusing our observers with unneeded implementation details. The really notworthy point here is actually that we keep now a better record of how a dependency came to be so that we can later reason about it more easily, but that is hidden so deep down in the library internals that change is more the problems it solves than the change itself.
2015-08-10link DependencyData structs togetherDavid Kalnischkies
Cache generation needs a way of quickly iterating over the unique potion of the dependencies to be able to share them. By linking them together we can reduce the speed penality (~ 80%) with only a small reduction in saved size (~ 20%). Git-Dch: Ignore
2015-08-10bunch of micro-optimizations for depcacheDavid Kalnischkies
DepCache functions are called a lot, so if we can squeeze some drops out of them for free we should do so. Takes also the opportunity to remove some whitespace errors from these functions. Git-Dch: Ignore
2015-08-10show or-groups in not-installed recommends and suggests listsDavid Kalnischkies
Further abstracting our new ShowList allows to use it for containers of strings as well giving us the option to implement an or-groups display for the recommends and suggests lists which is a nice trick given that it also helps with migrating the last remaining other cases of old ShowList.
2015-08-10implement a more generic ShowList methodDavid Kalnischkies
apt-get is displaying various lists of package names, which until now it was building as a string before passing it to ShowList, which inserted linebreaks at fitting points and showed a title if needed, but it never really understood what it was working with. With the help of C++11 the new generic knows not only what it works with, but generates the list on the fly rather than asking for it and potentially discarding parts of the input (= the non-default verbose display). It also doubles as a test for how usable the CacheSets are with C++11. (Not all callers are adapted yet.) Git-Dch: Ignore
2015-08-10rename 'apt-get files' to 'apt-get indextargets'David Kalnischkies
'files' is a bit too generic as a name for a command usually only used programmatically (if at all) by developers, so instead of "wasting" this generic name for this we use "indextargets" which is actually the name of the datastructure the displayed data is stored in. Along with this rename the config options are renamed accordingly.
2015-08-10handle site-changing redirects as mirror changesDavid Kalnischkies
Redirectors like httpredir.debian.org orchestra the download from multiple (hopefully close) mirrors while having only a single central sources.list entry by using redirects. This has the effect that the progress report always shows the source it started with, not the mirror it ends up fetching from, which is especially problematic for error reporting as having a report for a "Hashsum mismatch" for the redirector URI is next to useless as nobody knows which URI it was really fetched from (regardless of it coming from a user or via the report script) from this output alone. You would need to enable debug output and hope for the same situation to arise again… We hence reuse the UsedMirror field of the mirror:// method and detect redirects which change the site and declare this new site as the UsedMirrror (and adapt the description). The disadvantage is that there is no obvious mapping anymore (it is relatively easy to guess through with some experience) from progress lines to sources.list lines, so error messages need to take care to use the Target description (rather than current Item description) if they want to refer to the sources.list entry.
2015-08-10add c++11 override marker to overridden methodsDavid Kalnischkies
C++11 adds the 'override' specifier to mark that a method is overriding a base class method and error out if not. We hide it in the APT_OVERRIDE macro to ensure that we keep compiling in pre-c++11 standards. Reported-By: clang-modernize -add-override -override-macros Git-Dch: Ignore
2015-08-10implement Signed-By without using gpg for verificationDavid Kalnischkies
The previous commit returns to the possibility of using just gpgv for verification proposes. There is one problem through: We can't enforce a specific keyid without using gpg, but our acquire method can as it parses gpgv output anyway, so it can deal with good signatures from not expected signatures and treats them as unknown keys instead. Git-Dch: Ignore
2015-08-10merge keyrings with cat instead of gpg in apt-keyDavid Kalnischkies
If all keyrings are simple keyrings we can merge the keyrings with cat rather than doing a detour over gpg --export | --import (see #790665), which means 'apt-key verify' can do without gpg and just use gpgv as before the merging change. We declare this gpgv usage explicit now in the dependencies. This isn't a new dependency as gnupg as well as debian-archive-keyring depend on and we used it before unconditionally, just that we didn't declare it. The handling of the merged keyring needs to be slightly different as our merged keyring can end up containing the same key multiple times, but at least currently gpg does remove only the first occurrence with --delete-keys, so we move the handling to a if one is gone, all are gone rather than an (implicit) quid pro quo or even no effect. Thanks: Daniel Kahn Gillmor for the suggestion
2015-08-10support gpg 2.1.x in apt-keyDavid Kalnischkies
The output of gpg slightly changes in 2.1 which breaks the testcase, but the real problem is that this branch introduces a new default keyring format (which is called keybox) and mixing it with simple keyrings (the previous default format) has various problems like failing in the keybox to keyring import (#790665) or [older] gpgv versions not being able to deal with keyboxes (and newer versions as well currently: https://bugs.gnupg.org/gnupg/issue2025). We fix this by being a bit more careful in who creates keyrings (aka: we do it or we take a simple keyring as base) to ensure we always have a keyring instead of a keybox. This way we can ensure that any version combination of gpv/gpgv2 and gnupg/gnupg2 without doing explicit version checks and use the same code for all of them. Closes: 781042
2015-08-10allow individual targets to be kept compressedDavid Kalnischkies
There is an option to keep all targets (Packages, Sources, …) compressed for a while now, but the all-or-nothing approach is a bit limited for our purposes with additional targets as some of them are very big (Contents) and rarely used in comparison, so keeping them compressed by default can make sense, while others are still unpacked. Most interesting is the copy-change maybe: Copy is used by the acquire system as an uncompressor and it is hence expected that it returns the hashes for the "output", not the input. Now, in the case of keeping a file compressed, the output is never written to disk, but generated in memory and we should still validated it, so for compressed files copy is expected to return the hashes of the uncompressed file. We used to use the config option to enable on-the-fly decompress in the method, but in reality copy is never used in a way where it shouldn't decompress a compressed file to get its hashes, so we can save us the trouble of sending this information to the method and just do it always.
2015-08-10implement Signed-By option for sources.listDavid Kalnischkies
Limits which key(s) can be used to sign a repository. Not immensely useful from a security perspective all by itself, but if the user has additional measures in place to confine a repository (like pinning) an attacker who gets the key for such a repository is limited to its potential and can't use the key to sign its attacks for an other (maybe less limited) repository… (yes, this is as weak as it sounds, but having the capability might come in handy for implementing other stuff later).
2015-08-10add sources.list Check-Valid-Until and Valid-Until-{Max,Min} optionsDavid Kalnischkies
These options could be set via configuration before, but the connection to the actual sources is so strong that they should really be set in the sources.list instead – especially as this can be done a lot more specific rather than e.g. disabling Valid-Until for all sources at once. Valid-Until-* names are chosen instead of the Min/Max-ValidTime as this seems like a better name and their use in the wild is probably low enough that this isn't going to confuse anyone if we have to names for the same thing in different areas. In the longrun, the config options should be removed, but for now documentation hinting at the new options is good enough as these are the kind of options you set once across many systems with different apt versions, so the new way should work everywhere first before we deprecate the old way.
2015-08-10merge indexRecords into metaIndexDavid Kalnischkies
indexRecords was used to parse the Release file – mostly the hashes – while metaIndex deals with downloading the Release file, storing all indexes coming from this release and … parsing the Release file, but this time mostly for the other fields. That wasn't a problem in metaIndex as this was done in the type specific subclass, but indexRecords while allowing to override the parsing method did expect by default a specific format. APT isn't really supporting different types at the moment, but this is a violation of the abstraction we have everywhere else and, which is the actual reason for this merge: Options e.g. coming from the sources.list come to metaIndex naturally, which needs to wrap them up and bring them into indexRecords, so the acquire system is told about it as they don't get to see the metaIndex, but they don't really belong in indexRecords as this is just for storing data loaded from the Release file… the result is a complete mess. I am not saying it is a lot prettier after the merge, but at least adding new options is now slightly easier and there is just one place responsible for parsing the Release file. That can't hurt.
2015-08-10detect and error out on conflicting Trusted settingsDavid Kalnischkies
A specific trust state can be enforced via a sources.list option, but it effects all entries handled by the same Release file, not just the entry it was given on so we enforce acknowledgement of this by requiring the same value to be (not) set on all such entries.
2015-08-10bring back deb822 sources.list entries as .sourcesDavid Kalnischkies
Having two different formats in the same file is very dirty and causes external tools to fail hard trying to parse them. It is probably not a good idea for them to parse them in the first place, but they do and we shouldn't break them if there is a better way. So we solve this issue for now by giving our deb822 format a new filename extension ".sources" which unsupporting applications are likely to ignore an can begin gradually moving forward rather than waiting for the unknown applications to catch up. Currently and for the forseeable future apt is going to support both with the same feature set as documented in the manpage, with the longtime plan of adopting the 'new' format as default, but that is a long way to go and might get going more from having an easier time setting options than from us pushing it explicitely.
2015-08-10support lang= and target= sources.list optionsDavid Kalnischkies
We support arch= for a while, now we finally add lang= as well and as a first simple way of controlling which targets to acquire also target=. This asked for a redesign of the internal API of parsing and storing information about 'deb' and 'deb-src' lines. As this API isn't visible to the outside no damage done through. Beside being a nice cleanup (= it actually does more in less lines) it also provides us with a predictable order of architectures as provides in the configuration rather than based on string sorting-order, so that now the native architecture is parsed/displayed first. Observeable e.g. in apt-get output.
2015-08-10fix memory leaks reported by -fsanitizeDavid Kalnischkies
Various small leaks here and there. Nothing particularily big, but still good to fix. Found by the sanitizers while running our testcases. Reported-By: gcc -fsanitize Git-Dch: Ignore
2015-08-10some CXXFLAGS housekeepingDavid Kalnischkies
More warnings are always better. Git-Dch: Ignore
2015-08-10Fix test case breakage from the new policy implementationJulian Andres Klode
Everything's working now.
2015-08-10fileutl_test.cc: Check for /etc/passwd instead of /bin/shJulian Andres Klode
This fixes the tests on systems where usrmerge is installed. Gbp-dch: ignore
2015-06-16add d-pointer, virtual destructors and de-inline de/constructorsDavid Kalnischkies
To have a chance to keep the ABI for a while we need all three to team up. One of them missing and we might loose, so ensuring that they are available is a very tedious but needed task once in a while. Git-Dch: Ignore
2015-06-15allow ratelimiting progress reporting for testcasesDavid Kalnischkies
Progress reports once in a while which is a bit to unpredictable for testcases, so we enforce a steady progress for them in the hope that this makes the tests (mostly test-apt-progress-fd) a bit more stable. Git-Dch: Ignore
2015-06-15condense parallel requests with the same hashes to oneDavid Kalnischkies
It shouldn't be too common, but sometimes people have multiple mirrors in the sources or otherwise repositories with the same content. Now that we gracefully can handle multiple requests to the same URI, we can also fold multiple requests with the same expected hashes into one. Note that this isn't trying to find oppertunities for merging, but just merges if it happens to encounter the oppertunity for it. This is most obvious in the new testcase actually as it needs to delay the action to give the acquire system enough time to figure out that they can be merged.
2015-06-15show item ID in Hit, Ign and Err lines as wellDavid Kalnischkies
Again, consistency is the main sellingpoint here, but this way it is now also easier to explain that some files move through different stages and lines are printed for them hence multiple times: That is a bit hard to believe if the number is changing all the time, but now that it keeps consistent.
2015-06-15call URIStart in cdrom and file methodDavid Kalnischkies
All other methods call it, so they should follow along even if the work they do afterwards is hardly breathtaking and usually results in a URIDone pretty soon, but the acquire system tells the individual item about this via a virtual method call, so even through none of our existing items contains any critical code in these, maybe one day they might. Consistency at least once… Which is also why this has a good sideeffect: file: and cdrom: requests appear now in the 'apt-get update' output. Finally - it never made sense to hide them for me. Okay, I guess it made before the new hit behavior, but now that you can actually see the difference in an update it makes sense to see if a file: repository changed or not as well.
2015-06-15deal better with acquiring the same URI multiple timesDavid Kalnischkies
This is an unlikely event for indexes and co, but it can happen quiet easily e.g. for changelogs where you want to get the changelogs for multiple binary package(version)s which happen to all be built from a single source. The interesting part is that the Acquire system actually detected this already and set the item requesting the URI again to StatDone - expect that this is hardly sufficient: an Item must be Complete=true as well to be considered truely done and that is only the tip of the ::Done handling iceberg. So instead of this StatDone hack we allow QItems to be owned by multiple items and notify all owners about everything now, so that for the point of each item they got it downloaded just for them.
2015-06-15provide a public interface for acquiring changelogsDavid Kalnischkies
Provided is a specialized acquire item which given a version can figure out the correct URI to try by itself and if not provides an error message alongside with static methods to get just the URI it would try to download if it should just be displayed or similar such. The URI is constructed as follows: Release files can provide an URI template in the "Changelogs" field, otherwise we lookup a configuration item based on the "Label" or "Origin" of the Release file to get a (hopefully known) default value for now. This template should contain the string CHANGEPATH which is replaced with the information about the version we want the changelog for (e.g. main/a/apt/apt_1.1). This middleway was choosen as this path part was consistent over the three known implementations (+1 defunct), while the rest of the URI varies widely between them. The benefit of this construct is that it is now easy to get changelogs for Debian packages on Ubuntu and vice versa – even at the moment where the Changelogs field is present nowhere. Strictly better than what apt-get had before as it would even fail to get changelogs from security… Now it will notice that security identifies as Origin: Debian and pick this setting (assuming again that no Changelogs field exists). If on the other hand security would ship its changelogs in a different location we could set it via the Label option overruling Origin. Closes: 687147, 739854, 784027, 787190
2015-06-15implement default apt-get file --release-info modeDavid Kalnischkies
Selecting targets based on the Release they belong to isn't to unrealistic. In fact, it is assumed to be the most used case so it is made the default especially as this allows to bundle another thing we have to be careful with: Filenames and only showing targets we have acquired. Closes: 752702
2015-06-12store Release files data in the CacheDavid Kalnischkies
We used to read the Release file for each Packages file and store the data in the PackageFile struct even through potentially many Packages (and Translation-*) files could use the same data. The point of the exercise isn't the duplicated data through. Having the Release files as first-class citizens in the Cache allows us to properly track their state as well as allows us to use the information also for files which aren't in the cache, but where we know to which Release file they belong (Sources are an example for this). This modifies the pkgCache structs, especially the PackagesFile struct which depending on how libapt users access the data in these structs can mean huge breakage or no visible change. As a single data point: aptitude seems to be fine with this. Even if there is breakage it is trivial to fix in a backportable way while avoiding breakage for everyone would be a huge pain for us. Note that not all PackageFile structs have a corresponding ReleaseFile. In particular the dpkg/status file as well as *.deb files have not. As these have only a Archive property need, the Component property takes over this duty and the ReleaseFile remains zero. This is also the reason why it isn't needed nor particularily recommended to change from PackagesFile to ReleaseFile blindly. Sticking with the earlier is usually the better option.
2015-06-11implement 'apt-get files' to access index targetsDavid Kalnischkies
Downloading additional files is only half the job. We still need a way to allow external tools to know where the files are they requested for download given that we don't want them to choose their own location. 'apt-get files' is our answer to this showing by default in a deb822 format information about each IndexTarget with the potential to filter the records based on lines and an option to change the output format. The command serves also as an example on how to get to this information via libapt.
2015-06-11show URI.Path in all acquire item descriptionsDavid Kalnischkies
It is a rather strange sight that index items use SiteOnly which strips the Path, while e.g. deb files are downloaded with NoUserPassword which does not. Important to note here is that for the file transport Path is pretty important as there is no Host which would be displayed by Site, which always resulted in "interesting" unspecific errors for "file:". Adding a 'middle' ground between the two which does show the Path but potentially modifies it (it strips a pending / at the end if existing) solves this "file:" issue, syncs the output and in the end helps to identify which file is meant exactly in progress output and co as a single site can have multiple repositories in different paths.
2015-06-10store all targets data in IndexTarget structDavid Kalnischkies
We still need an API for the targets, so slowly prepare the IndexTargets to let them take this job. Git-Dch: Ignore
2015-06-10abstract the code to iterate over all targets a bitDavid Kalnischkies
We have two places in the code which need to iterate over targets and do certain things with it. The first one is actually creating these targets for download and the second instance pepares certain targets for reading. Git-Dch: Ignore
2015-06-09configureable acquire targets to download additional filesDavid Kalnischkies
First pass at making the acquire system capable of downloading files based on configuration rather than hardcoded entries. It is now possible to instruct 'deb' and 'deb-src' sources.list lines to download more than just Packages/Translation-* and Sources files. Details on how to do that can be found in the included documentation file.
2015-06-09do not request files if we expect an IMS hitDavid Kalnischkies
If we have a file on disk and the hashes are the same in the new Release file and the old one we have on disk we know that if we ask the server for the file, we will at best get an IMS hit – at worse the server doesn't support this and sends us the (unchanged) file and we have to run all our checks on it again for nothing. So, we can save ourselves (and the servers) some unneeded requests if we figure this out on our own.
2015-06-09support hashes for compressed pdiff filesDavid Kalnischkies
At the moment we only have hashes for the uncompressed pdiff files, but via the new '$HASH-Download' field in the .diff/Index hashes can be provided for the .gz compressed pdiff file, which apt will pick up now and use to verify the download. Now, we "just" need a buy in from the creators of repositories…
2015-06-09fix download-file using testcases to run as rootDavid Kalnischkies
Git-Dch: Ignore