| Age | Commit message (Collapse) | Author |
|---|
|
In bugreport #747261 I confirmed with this testcase that apt actually
supports the requested architecture-specific conflicts already since
2012 with commit cef094c2ec8214b2783a2ac3aa70cf835381eae1.
The old test only does simulations which are handy to check apt,
this one builds 'real' packages to see if dpkg agrees with us.
Git-Dch: Ignore
|
|
Version/Architecture information in a Translation-$lang file is
not allowed, so don't try to parse it. This is a fix for a bugreport
where a Translation-en file contained the content of the regular
Packages file (probably due to local FS corruption). This lead to
strange error messages on file download.
Thanks to Thomas Reusch for the report.
|
|
|
|
debian/sid
|
|
Closes: 746434
|
|
The bugreport highlights the problem with an empty package name. We fix
this by 'ignoring' these so that it behaves just like "apt-get install".
The deeper problem is that modifier strings can be longer than a package
name in which case the comparison doesn't make sense, so don't compare
then. Was not noticed so far as all modifiers are of length 1, so the
only package name shorter than this is in fact the empty package name.
Closes: 744940
|
|
My commit 45df0ad2 from 26. Nov 2009 had a little remark:
"The commit also includes a very very simple testapp."
This was never intended to be permanent, but as usually…
The commit adds the needed make magic to compile gtest statically
as it is required and links it against a small runner. All previous
testcase binaries are reimplemented in gtest and combined in this
runner. While most code is a 1:1 translation some had to be rewritten
like compareversion_test.cc, but the coverage remains the same.
|
|
fseek and co do this to their eof-flags and it is more logic this way as
we will usually seek away from the end (e.g. to re-read the file).
The commit also improves the testcase further and adds a test for the
binary compressor codepath (as gz, bzip2 and xz are handled by
libraries) via the use of 'rev' as a 'compressor'.
|
|
Conflicts:
test/integration/test-apt-cli-list
|
|
|
|
A package which can't be downloaded anymore is very likely dropped from
a release and can therefore no longer be 'standard' (or similar). We
therefore do not grant points for them anymore and demote them to
prio:extra instead which helps other packages breaking them away even if
they have a lower priority.
The testcase was initially created by Michael Vogt and just amended.
|
|
We now do Open, Write and Read (the later multiple ways) for each
permission and each compressor we have configured to cover more cases
and especially ensure that compressors do not change our premissions.
This test is also to be credited for discovering the skippos-fix.
Git-Dch: Ignore
|
|
|
|
Commit 7335eebea6dd43581d4650a8818b06383ab89901 introduced a bug
that caused FileFd to create insecure permissions when FileFd::Atomic
is used. This commit fixes the permissions and adds a test.
The bug is most likely caused by the confusing "Perm" parameter
that is passed to Open() - its not the file permissions but intead
the "mode" part of open/creat.
|
|
If the user is using "apt list pattern" and there is only a single
hit, notice about "--all-versions" as this is what the user may
be interessted in
|
|
This patch should fix spurious test failures in jenkins or travis
that are caused by a race condition in the {stunnel,aptwebserver}.pid
file creation
|
|
Packages in the "deinstall ok config-file" have no candidate or
instaleld version. So they must be special cased in the apt list
generation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use mkstemp() in apt-extractemplates and add a integrationtest
for apt-extracttemplates too. Thanks to Steve Kemp for the report.
|
|
A text progressbar is now displayed in the Dpkg::Progress-Fancy
mode. It can be turned off via the apt option
Dpkg::Progress-Fancy::Progress-Bar=false
|
|
In commit 446551c8 I changed MarkInstall to discard the candidate if the
candidate can't satisfy the dependency. This breaks interactive solvers
like aptitude which can change the candidate on-the-fly later.
In commit df77d8a5 I introduced this 'early' loop-breaking to begin with
which can't be that helpful for interactive solvers as well, but makes
perfect sense for non-interactives to stop them from exploring trees
which can't be satisfied, but it isn't perfect as ideally we would check
this before auto-installing the first dependency.
This commit therefore moves the loop into its own IsInstallOk hook so
that frontends can override this check if they want to and in exchange
removes the loop-breaking from MarkInstall itself and does it before any
dependency is installed.
Closes: 740750
|
|
We have to properly close our pseudo terminals even in error cases
before we call post-invoke scripts. This is done now by breaking from
the dpkg calling loop instead of copying the handling, which did it in
the wrong order before.
This also ensures that our state file is written in error cases to
record autobit and co as this was forgotten before.
Closes: 738969
|
|
Git-Dch: Ignore
|
|
Metapackages like "linux-image-amd64" are otherwise matched by our
extraction as well, which later on can't be successfully compared via
dpkg --compare-versions as the 'amd64' bit isn't a version number.
(Luckily none of our architectures starts with a digit.)
This was broken by me in 0.9.16 as I moved a shell-glob matcher to a
regex-based one which has slightly different semantics regarding '*'.
Closes: 741962
|
|
|
|
The framework can be configured to use different compression algorithms
to test different ones, but a testcase testing for gz support should
always be run with gz, regardless of what compressions are configured
otherwise.
Git-Dch: Ignore
|
|
Beside fixing this minor code duplication it also resolves the problem
of messing up vim syntax-highlighting.
Git-Dch: Ignore
|
|
Mostly ensures that we use the build methods and not the system
provided methods in the tests (if we don't want it that way).
Git-Dch: Ignore
|
|
As we deal with regex matchers here the dots are treated as wildcards if
we don't take care of escaping them. Not very likely that this could be
a real-world problem, but just to be sure.
|
|
kfreebsd as well as hurd kernel packages call the postinst script as
well so we just need to enable the correct parsing for installed
packages and disable the "protect every version" hammer for them.
|
|
With APT::VersionedKernelPackages users have the option of adding
packages like pre-build out-of-tree modules to the list of automatically
protected from being autoremoved.
|
|
Git-Dch: Ignore
|
|
fixes some messages and their translation so that all of them have three
dots for messages with an elipse. Many translations already had this.
|
|
Old code limited lines to 250 characters which is probably enough for
everybody, but who knows… It also takes care of device nodes which start
with the same prefix.
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
The unpack of a M-A:same package will force the unpack of all its
siblings directly to prevent that they could be separated by later
immediate actions. In commit 634985f8 a call to SmartConfigure was
introduced to configure these packages at the time the installation
order encounters them. Usually, the unpack order is already okay, so
that this 'earlier' unpack was not needed and if it wouldn't have been
done, the package would now only be unpacked, but by configuring the package
now we impose new requirements which must be satisfied. The code is
clever enough to handle this most of the time (it worked for 2 years!),
but it isn't needed and in very coupled cases this can fail.
Removing this call again removes this extra burden and so simplifies the
ordering as can be seen in the modified tests. Famous last words, but I
don't see a reason for this extra burden to exist hence the remove.
Closes: 740843
|
|
Git-Dch: Ignore
Reported-By: gcc -Wsuggest-attribute={pure,const,noreturn}
|
|
Beside being a bit cleaner it hopefully also resolves oddball problems
I have with high levels of parallel jobs.
Git-Dch: Ignore
Reported-By: iwyu (include-what-you-use)
|
|
Reported-By: gcc -Wunused-parameter
Git-Dch: Ignore
|
|
Reported-By: gcc -Wignored-qualifiers
Git-Dch: Ignore
|
|
Git-Dch: Ignore
Reported-By: gcc -Wmissing-declarations
|
|
Git-Dch: Ignore
|
