summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2017-09-26allow empty build-dependency fields in the parserDavid Kalnischkies
APT used to parse only wellformed files produced by repository creation tools which removed empty files as pointless before apt would see them. Now that apt can be told to parse e.g. debian/control files directly, it needs to be a little more accepting through: We had this with comments already, now let it deal with the far more trivial empty fields. Closes: #875363
2017-09-26proper error reporting for v3 onion servicesDavid Kalnischkies
APT connects just fine to any .onion address given, only if the connect fails somehow it will perform checks on the sanity of which in this case is checking the length as they are well defined and as the strings are arbitrary a user typing them easily mistypes which apt should can be slightly more helpful in figuring out by saying the onion hasn't the required length.
2017-09-24Drop curl method and apt-transport-https packageJulian Andres Klode
This automatically removes any old apt-transport-https, as apt now Breaks it unversioned.
2017-09-09ftparchive: Do not pass through disabled hashes in SourcesJulian Andres Klode
When writing a Sources files hashes that were already present in the .dsc were always copied through (or modified), even if disabled. Remove them instead when they are disabled, otherwise we end up with hashes for tarballs and stuff but not for dsc files (as the dsc obviously does not hash itself). Also adjust the tests: test-compressed-indexes relied on Files being present in showsrc, and test-apt-update-weak-hashes expected the tarball to be downloaded when an archive only has MD5 and we are requiring SHA256 because that used to work because the tarball was always included. Closes: #872963
2017-09-09add test for bug 870675 (hang on unsupported method)David Kalnischkies
Commit e250a8d8d8ef2f8f8c5e2041f7645c49fba7aa36 implemented the fix and should have included already this testcase for it. Gbp-Dch: Ignore
2017-09-09test: Workaround gpgv warningJulian Andres Klode
gpgv: WARNING: This key is not suitable for signing in --compliance=gnupg mode
2017-08-24Make test-bug-818628-unreadable-source work on !amd64Julian Andres Klode
It was broken because apt.conf.d was not readable, but that's where the architecture is defined...
2017-08-12Work around float rounding change in gcc 7 on i386Julian Andres Klode
This caused a build failure in the test suite.
2017-08-04ftparchive: sort discovered filenames before writing indexesDavid Kalnischkies
If 'apt-ftparchive packages /path/to/files/' (or sources) is used the files to include in the generated index (on stdout) were included in the order in which they were discovered, which isn't a very stable order which could lead to indexes changing without actually changing content causing needless changes in the repository changing hashsums, pdiffs, rsyncs, downloads, …. This does not effect apt-ftparchive calls which already have an order defined via a filelist (like generate) which will still print in the order given by the filelist. Note that a similar effect can be achieved by post-processing index files with apt-sortpkgs. Closes: 869557 Thanks: Chris Lamb for initial patch & Stefan Lippers-Hollmann for testing
2017-07-26suggest using auth.conf for sources with passwordsDavid Kalnischkies
The feature exists for a long while even if we get around to document it properly only now, so we should push for its adoption a bit to avoid the problems its supposed to solve like avoiding usage of non-world readable configuration files as they can cause strange behaviour for the unsuspecting user (like different solutions as root and non-root).
2017-07-26show a warning for Debian shutting down FTP servicesDavid Kalnischkies
We detect the effected sources by matching Release info – that has potential by-catch of repositories which have incorrect field values, but those are better fixed now anyhow. The bigger incorrectness is that this message will not only be printed for the Debian services itself but also for all mirrors not under Debian control but serving Debian like more local/private mirrors which will not (directly) shutdown. It is likely through that many of them will follow suite with less visible announcements or break downright if their upstream source disappears, so having false-positives here seems benefitial for the user in the end.
2017-07-26lookup login info for proxies in auth.confDavid Kalnischkies
On HTTP Connect we since recently look into the auth.conf file for login information, so we should really look for all proxies into the file as the argument is the same as for sources entries and it is easier to document (especially as the manpage already mentions it as supported).
2017-07-26reimplement and document auth.confDavid Kalnischkies
We have support for an netrc-like auth.conf file since 0.7.25 (closing 518473), but it was never documented in apt that it even exists and netrc seems to have fallen out of usage as a manpage for it no longer exists making the feature even more arcane. On top of that the code was a bit of a mess (as it is written in c-style) and as a result the matching of machine tokens to URIs also a bit strange by checking for less specific matches (= without path) first. We now do a single pass over the stanzas. In practice early adopters of the undocumented implementation will not really notice the differences and the 'new' behaviour is simpler to document and more usual for an apt user. Closes: #811181
2017-07-26show warnings instead of errors if files are unreadableDavid Kalnischkies
We used to fail on unreadable config/preferences/sources files, but at least for sources we didn't in the past and it seems harsh to refuse to work because of a single file, especially as the error messages are inconsistent and end up being silly (like suggesting to run apt update to fix the problem…). LP: #1701852
2017-07-26use FileFd to parse all apt configuration filesDavid Kalnischkies
Using different ways of opening files means we have different behaviour and error messages for them, so by the same for all we can have more uniformity for users and apt developers alike.
2017-07-26fail early in http if server answer is too small as wellDavid Kalnischkies
Failing on too much data is good, but we can do better by checking for exact filesizes as we know with hashsums how large a file should be, so if we get a file which has a size we do not expect we can drop it directly, regardless of if the file is larger or smaller than what we expect which should catch most cases which would end up as hashsum errors later now a lot sooner.
2017-07-26fail earlier if server answers with too much dataDavid Kalnischkies
We tend to operate on rather large static files, which means we usually get Content-Length information from the server. If we combine this information with the filesize we are expecting (factoring in pipelining) we can avoid reading a bunch of data we are ending up rejecting anyhow by just closing the connection saving bandwidth and time both for the server as well as the client.
2017-07-26don't try to parse all fields starting with HTTP as status-lineDavid Kalnischkies
It is highly unlikely to encounter fields which start with HTTP in practice, but we should really be a bit more restrictive here.
2017-07-26don't move failed pdiff indexes out of partialDavid Kalnischkies
The comment says this is intended, but looking at the history reveals that the comment comes from a different era. Nowadays we don't really need it anymore (and even back then it was disputeable) as we haven't used that file for our update in the end and nothing really needs this file after the update. Triggered is this by 188f297a2af4c15cb1d502360d1e478644b5b810 which moves various error conditions forward including this code expecting the file to exist – but it doesn't need to as download could have failed. We could fix that by simple checking if the file exists and only stage it if it does, but instead we don't stage it and instead even rename it out of the way with our conventional FAILED name (if it exists). That restores support for partial mirrors (= in this case mirrors which don't ship pdiff files). Note that apt heals itself even if only such a mirror is used as the update is successful even if that error is shown. Closes: 869425
2017-07-20Use C++11 threading support instead of pthreadJulian Andres Klode
This makes the code easier to read.
2017-07-12Reformat and sort all includes with clang-formatJulian Andres Klode
This makes it easier to see which headers includes what. The changes were done by running git grep -l '#\s*include' \ | grep -E '.(cc|h)$' \ | xargs sed -i -E 's/(^\s*)#(\s*)include/\1#\2 include/' To modify all include lines by adding a space, and then running ./git-clang-format.sh.
2017-07-12Handle supported components with slashes in sources.listApollon Oikonomopoulos
Commit d7c92411dc1f4c6be098d1425f9c1c075e0c2154 parses the Components section of (In)Release and attempts to detect the distribution's supported components. While doing so, it handles component names with slashes in a special manner, assuming that the actual component is only the part after the final slash. This is done to handle security.debian.org, which usually appears in sources.list as follows: deb http://s.d.o/debian-security stretch/updates main contrib non-free while the actual release file has: Codename: stretch Components: updates/main updates/contrib updates/non-free While this special handing on APTs part indeed works for debian-security, it emits spurious warnings on repositories that actually use slashes in the component names *and* appear so in sources.list. We fix this by adding both component versions (whole and final part) to the SupportedComponents array. Closes: #868127
2017-07-01Ignore download order in test-apt-update-failure-propagationJulian Andres Klode
This caused spurious test failures.
2017-06-30Switch to 'http' as the default https methodJulian Andres Klode
The old curl based method is still available as 'curl', 'curl+http', and 'curl+https'.
2017-06-30Reset failure reason when connection was successfulJulian Andres Klode
When APT was trying multiple addresses, any later error somewhere else would be reported with ConnectionRefused or ConnectionTimedOut as the FailReason because that was set by early connect attempts. This causes APT to handle the failures differently, leading to some weirdly breaking test cases (like the changed one). Add debugging to the previously failing test case so we can find out when something goes wrong there again.
2017-06-28support tor+https being handled by httpDavid Kalnischkies
The apt-transport-tor package operates via simple symlinks which can result in 'http' being called as 'tor+https', so it must pick up the right configuration pieces and trigger https support also in plus names.
2017-06-28Strip 0: epochs from the version hashJulian Andres Klode
This should fix some issues with dpkg normalizing such values. Suprisingly enough apt treats the Version: field the same, even with epoch vs without, but not when searching, and does not strip the 0: from the output.
2017-06-28show a Release-Notes URI if infos were changedDavid Kalnischkies
This gives the repository owner a chance to explain why this change was needed – e.g. explaining the organisational changes or simply detailing the changes in the new release made. Note that this URI is also shown if the change is accepted, so it also draws attention to release notes of minor updates (if users watch apt output closely).
2017-06-28error in update on Release information changesDavid Kalnischkies
The value of Origin, Label, Codename and co can be used in user configuration from apts own pinning to unattended upgrades. A repository changing this values can therefore have serious effects on the behaviour of apt and other tools using these values. In a first step we will generate error messages for these changes now explaining the need for explicit confirmation and provide config options and commandline flags to accept them.
2017-06-28fail instead of warn on insecure repositories in apt-getDavid Kalnischkies
The exception was made to give (script) users a one-release grace period to adapt their setup to deal with apt enforcing signing of repositories. As we are now at the start of a new release cycle its as good a time as any to lift it now. Removes-Exception: 952ee63b0af14a534c0aca00c11d1a99be6b22b2
2017-06-28Merge branch 'feature/http-https'Julian Andres Klode
2017-06-28Skip test-apt-download-progressJulian Andres Klode
The test keeps failing continously on Ubuntu, so let's fix it for now.
2017-06-28Fix test suite and enable non-curl testing on travis, shippableJulian Andres Klode
Gbp-Dch: ignore
2017-06-28Fix https->http redirect issuesDavid Kalnischkies
Gbp-Dch: ignore
2017-06-27travis: ignore profiling warning in progress linesDavid Kalnischkies
On Travis CI running tests with code coverage enabled sometimes generates profiling lines, which we filter out for a while now, but that misses lines generated showing progress still causing test failures, so more sed logic is added in the hopes to ignore them. Extends: 58608941e6b58a46109b7cd875716b3d8054c4bf Gbp-Dch: Ignore
2017-06-26deal with 3xx httpcodes as required by HTTP/1.1 specDavid Kalnischkies
An unknown code should be handled the same as the x00 code of this group, but for redirections we used to treat 300 (and a few others) as an error while unknown codes were considered redirections. Instead we check now explicitly for the redirection codes we support for redirecting (and add the 308 defined in RFC 7538) to avoid future problems if new 3xx codes are added expecting certain behaviours. Potentially strange would have been e.g. "305 Use Proxy" sending a Location for the proxy to use – which wouldn't have worked and resulted in an error anyhow, but probably confused users in the process.
2017-06-26fail InRelease on non-404 HTTP errorcodesDavid Kalnischkies
There are very many HTTP errorcodes which indicate that the repository isn't available at the moment or the connection has some kind of problem. Given that we do not require Release files the result was that these errors were ignored and the user presented with a message like "Repository is no longer signed" which sends the user in the wrong direction. Instead of trying to figure out which http errorcodes indicate a global problem we accept only 404 for ignoring and consider all the rest as hard errors now causing us to stop instantly after the InRelease file and print the errorcode (with short description from server) received.
2017-06-26show .diff/Index properly as ignored if we fallbackDavid Kalnischkies
Moving the code responsible for parsing the Index file from ::Done into the slightly earlier ::VerifyDone allows us to still "fail" the download if we can't make use of the Index for whatever reason, so that the progress log correctly displays "Ign" instead of "Get" for the file. This also makes quiet a few debug messages proper error messages (but those are still hidden by default for Ign lines).
2017-06-26warn if an expected file can't be acquiredDavid Kalnischkies
If we couldn't find an entry for a Sources file we would generate an error while for a Packages file we would silently skip it due to assuming it is missing because it is empty. We can do better by checking if the repository declares that it supports a component we want to get the file from and if not say so and hint at the user making a typo. An example were this helps is mozilla.debian.net which dropped the firefox-aurora component (as upstream did) meaning no upgrades until the user notices manually that the repository doesn't provide packages anymore. With this commit warnings are raised hopefully causing the user to investigate what is wrong (sooner).
2017-06-26make the create-test-data script great againDavid Kalnischkies
Changes in the past to the buildsystem and the testing framework broke this little helper script – lets fix those problems to restore functionality. Gbp-Dch: Ignore
2017-06-26Show permission error if ProxyAutoDetect cmd can't be executedDavid Kalnischkies
As the proxy commands are not executed as root, a user can run into permission errors (s)he isn't expecting – as our switching is an implementation detail – so the error message in that case should really be better than a generic "error code 100" sending the user in the wrong direction as that implies the command was executed, but errored out. Closes: 857885
2017-06-26Refactor to avoid loop/dangling gcc warningsDavid Kalnischkies
Gbp-Dch: Ignore
2017-06-26Call update from apt-key test for a strange path testDavid Kalnischkies
We setup a "horrible" environment in the apt-key testcase to check all kinds of things, but we really should be making also at least a simple apt update call, as that in turn will call apt-key which is how apt-key is used in the non-testcase world, so that calling should be able to deal with such environments as well. Gbp-Dch: Ignore
2017-06-26Add a few more Auto-Detect-Proxy testsDavid Kalnischkies
Gbp-Dch: Ignore
2017-06-26tests: fix gpg-agent killing in testcasesDavid Kalnischkies
We want to kill the agent if its home directory exists at that location, not if it isn't there (leaving an army of processes around). Gbp-Dch: Ignore
2017-05-31Fix parsing of or groups in build-deps with ignored packagesJulian Andres Klode
If the last alternative(s) of an Or group is ignored, because it does not match an architecture list, we would end up keeping the or flag, effectively making the next AND an OR. For example, when parsing (on amd64): debhelper (>= 9), libnacl-dev [amd64] | libnacl-dev [i386] => debhelper (>= 9), libnacl-dev | Which can cause python-apt to crash. Even worse: debhelper (>= 9), libnacl-dev [amd64] | libnacl-dev [i386], foobar => debhelper (>= 9), libnacl-dev [amd64] | foobar By setting the previous alternatives Or flag to the current Or flag if the current alternative is ignored, we solve the issue. LP: #1694697
2017-03-19Ignore AutomaticRemove conffile option in upgradeDavid Kalnischkies
We are in a dilemma here: The regression of sorts was introduced in 2013 with commit d8a8f9d7f0 allowing pkg modifiers for the upgrade commands. That calls the autoremover as a sideeffect through and with it comes the option to remove the garbage packages in these commands (similar to aptitude). Having the option on the commandline is no problem – people aren't going to request what they don't want (or so I hope), but the documentation explicitly states that this option only effects install/remove and mentions a config knob users might use and expect to not suddenly apply (especially without documentation) to more commands. Just reverting the commit is out of question, completely ignoring the option breaks the workflow of every user who happened to use --autoremove on the commandline for upgrade and expects that to work given that it was accepted and worked in a stable release. Changing the documentation to reflect reality while perhaps the simplest and cleanest option contradicts freeze and is a surprising change we tend to avoid like the plague while just leaving it be confuses all users who end up believing the documentation even if was different in the last 3 years. So what we do is a tricky compromise: The configuration option if read from a file does apply only for install/remove as documented, while if the option is encountered on the commandline it is accepted and applies to the upgrade which should make 99% of the users happy. The rest has to wait for us to figure out for buster how to get that documented and implemented in a saner way. Closes: #855891
2017-03-19Fix and avoid quoting in CommandLine::AsStringDavid Kalnischkies
In the intended usecase where this serves as a hack there is no problem with double/single quotes being present as we write it to a log file only, but nowadays our calling of apt-key produces a temporary config file containing this "setting" as well and suddently quoting is important as the config file syntax is allergic to it. So the fix is to ignore all quoting whatsoever in the input and just quote (with singles) the option values with spaces. That gives us 99% of the time the correct result and the 1% where the quote is an integral element of the option … doesn't exist – or has bigger problems than a log file not containing the quote. Same goes for newlines in values. LP: #1672710
2017-02-10Do not package names representing .dsc/.deb/... filesJulian Andres Klode
In the case of build-dep and other commands where a file can be passed we must make sure not to normalize the path name as that can have odd side effects, or well, cause the operation to do nothing. Test for build-dep-file is adjusted to perform the vcard check once as "vcard" and once as "VCard", thus testing that this solves the reported bug. We inline the std::transform() and optimize it a bit to not write anything in the common case (package names are defined to be lowercase, the whole transformation is just for names that should not exist...) to counter the performance hit of the added find() call (it's about 0.15% more instructions than with the existing transform, but we save about 0.67% in writes...). Closes: #854794
2017-02-09don't test with "too early for 32bit" yearsDavid Kalnischkies
$ uname -m i686 $ date -d '0-12-25' date: invalid date '0-12-25' Test-Regression-In: 25a14d4ccfceb2698edce01092bc6a1dbe9fb217