| Age | Commit message (Collapse) | Author |
|---|
|
Architectures for packages which do not belong to the native nor a
foreign architecture (dubbed barbarian for now) which are marked
M-A:foreign still provide in their own architecture even if not for
others. Also, other M-A:foreign (and allowed) packages provide in these
barbarian architectures.
|
|
Closes: #734922
|
|
This prevents a test suite failure on systems with weird umasks.
Also set umask 000 at the beginning so we can actually check for
that anywhere.
Gbp-Dch: ignore
|
|
Just enabling it for anyone breaks with HTTP/1.0 servers and
proxies sometimes.
Closes: #810796
|
|
The code already deals with compressed leftovers, but forgot the
uncompressed files. The opertunity is picked to reorder this code and
add debug messages about the actions taken as well as produce such a
leftover file in the associated testcase.
|
|
With the addition of the $HASH-Download field in the .diff/Index we got
the size of the compressed patches for 'free', so if that information is
available we can use it for a more fitting calculation of the size
requirements of the patches vs. the complete file.
Note that this predicts a too small size in the transition case in which
the information isn't available for all patches, but figuring this out
would be a lot of code for practically nothing as only one update can
ever be in such a transition phase.
|
|
Some (older) versions of bash seem to be allergic to a method named
"aptautotest_grep_^apt" (note the caret). Unlikely that we are going to
write autotests for such commands so we could just skip those, but lets
instead just use "normal" characters in the names and strip the rest as
we already did with the (arguable more common) '-'.
|
|
This way it works more similar to the compressor binaries, which we
can relief in this way from their job in the test framework avoiding the
need of adding e.g. liblz4-tool to the test dependencies.
|
|
Downloading and storing are two different operations were different
compression types can be preferred. For downloading we provide the
choice via Acquire::CompressionTypes::Order as there is a choice to
be made between download size and speed – and limited by whats available
in the repository.
Storage on the other hand has all compressions currently supported by
apt available and to reduce runtime of tools accessing these files the
compression type should be a low-cost format in terms of decompression.
apt traditionally stores its indexes uncompressed on disk, but has
options to keep them compressed. Now that apt downloads additional files
we also deal with files which simply can't be stored uncompressed as
they are just too big (like Contents for apt-file). Traditionally they
are downloaded in a low-cost format (gz) as repositories do not provide
other formats, but there might be even lower-cost formats and for
download we could introduce higher-cost in the repositories.
Downloading an entire index potentially requires recompression to
another format, so an update takes potentially longer – but big files
are usually updated via pdiffs which has to de- and re-compress anyhow
and does it on the fly anyhow, so there is no extra time needed and in
general it seems to be benefitial to invest the time in update to save
time later on file access.
|
|
Less hardcoding should help while introducing new compressors.
Git-Dch: Ignore
|
|
There is no reason to enforce that the file we start the bootstrap with
is compressed with a compressor which is available online. This allows
us to change the on-disk format as well as deals with repositories
adding/removing support for a specific compressor.
|
|
Adding a new compressor method meant adding a new method as well – even
if that boilt down to just linking to our generalized decompressor with
a new name. That is unneeded busywork if we can instead just call the
generalized decompressor and let it figure out which compressor to use
based on the filenames rather than by program name.
For compatibility we ship still 'gzip', 'bzip2' and co, but they are
just links to our "new" 'store' method.
|
|
Gbp-Dch: ignore
|
|
This option controls if downloaded packages should be kept after
a successful install or if they should be deleted. The default
for "apt-get" is that they are kept (just like before).
However the default for "apt" is that they get deleted.
Closes: #160743
|
|
apt_preferences and deb822-style sources used the specialized class
pkgUserTagSection to deal with comments before/after a given stanza, but
it couldn't deal with comments in the stanza at all.
codesearch suggests that nobody else does and a vastely superior way of
working with potentially commented files is implemented now, so we can
officially discourage the use of the old incomplete hack class.
|
|
Now (55153bf94ff28a23318e79aa48242244c4d82b3c) that pkgTagFile can be
told to deal with all sorts of comments we can use this mode to parse
dsc (as by catch) and debian/control files properly even in the wake of
multiline fields spliced with comments like Build-Depends.
Closes: 806775
|
|
APT usually deals with perfectly formatted files generated automatically
be other programs – and as it has to parse multiple MBs of such files it
tries to be fast rather than forgiving.
This was always a problem if we reused this parser for files with a
deb822 syntax which are mostly written by hand however, like
apt_preferences or the deb822-style sources as these can include stray
newlines and more importantly comments all over the place.
As a stopgap we had pkgUserTagSection which deals at least with comments
before and after a given stanza, but comments in between weren't really
supported and now that we support parsing debian/control for e.g.
build-dep we face the full comment problem e.g. with comments inbetween
multi-line fields (like Build-Depends).
We can't easily deal with this on the pkgTagSection level as the interface
gives access to 'raw' char-pointers for performance reasons so we would
need to optionally add a buffer here on which we could remove comments
to hand out pointers into this buffer instead. The interface is quite
large already and supports writing stanzas as well, which does not
support comments at all either. So while in future it might make sense
to have a parser setup which deals with and keeps comments in this
commit we opt for the simpler solution for now: We officially declare
that pkgTagSection does not support comments and instead expect the
caller to deal with them, which in our case is pkgTagFile:
pkgTagFile is extended with an additional mode which can deal with
comments by dropping them from the buffer which will later form the
input of pkgTagSection. The actual implementation is slightly more
complex than this sentence suggests at first on one hand to have good
performance and on the other to allow jumping directly to stanzas with
offsets collected in a previous run (like our cache generation does it
for example).
|
|
This test relies on the ordering of the hash function.
|
|
Regression introduced in 8710a36a01c0cb1648926792c2ad05185535558e,
but such fields are unlikely in practice as it is just as simple to not
have a field at all with the same result of not having a value.
Closes: 808102
|
|
Debian has a Packages file for arch:all already, but the arch:any files
contain arch:all packages as well, so downloading it would be a total
waste of resources. Getting this solved is on the list of things to do,
but it is also the hardest part – for index targets like Contents the
situation is much easier and less server/client implementations are
involved so we might not want to stall them.
A repository can now declare via:
No-Support-for-Architecture-all: Packages
that even if an arch:all Packages exists, it shouldn't be downloaded, so
that support for Contents files can be added now.
See also 1dd20368486820efb6ef4476ad739e967174bec4 for the implementation
of downloading arch:all index targets, which this is limiting.
The field uses the name of the target from the apt configuration for
simplicity and is negative by design as this field is intended to be
supported/needed only for a "short" time (one or two Debian releases).
While this commit theoretically supports any target, its expected to
only see "Packages" as a value in reality.
|
|
We try to acquired the locks, but we didn't stop if we failed to get it…
Closes: 808561
|
|
The output changes slightly between different versions, which we already
dealt with in the main testcase for apt-key, but there are two more
which do not test both versions explicitly and so still had gpg1 output
to check against as this is the default at the moment.
Git-Dch: Ignore
|
|
apt-key creates internally a script (since ~1.1) which it will call to
avoid dealing with an array of different options in the code itself, but
while writing this script it wraps the values in "", which will cause
the shell to evaluate its content upon execution.
To make 'use' of this either set a absolute gpg command or TMPDIR to
something as interesting as:
"/tmp/This is fü\$\$ing cràzy, \$(man man | head -n1 | cut -d' ' -f1)\$!"
If such paths can be encountered in reality is a different question…
|
|
This doesn't allow all tests to run cleanly, but it at least allows to
write tests which could run successfully in such environments.
Git-Dch: Ignore
|
|
Testing /usr as TMPDIR assumes that GetTempDir() cannot use it
because it cannot write to it; this is true for non-root users, but
not so much for root.
Since root can access everything, perform this particular test case
only when not running as root.
Closes: #808383
|
|
This filters out errors due to timing issues. Early exits if
enough pulses occured.
|
|
This helps writing test cases. Also adapt the test case that
expected 64-bit.
Nothing changes performance wise, the distribution of the hash
values remains intact.
|
|
This makes the test suite work on 32 bit-long platforms.
Gbp-Dch: ignore
|
|
Use asprintf() so we have easy error detection and do not depend
on PATH_MAX.
Do not add another separator to the generated path, in both cases
the path inside the chroot is guaranteed to have a leading /
already.
Also pass -Wall to gcc.
|
|
This caused test-bug-717891-abolute-uris-for-proxies to fail
Gbp-Dch: ignore
|
|
This breaks a lot of test cases
Gbp-Dch: ignore
|
|
The allocated buffer was one byte too small. Allocate a buffer
of PATH_MAX instead and use snprintf(), as suggested by Martin
Pitt.
|
|
This reduces the chance that the test fails.
Gbp-Dch: ignore
|
|
Instead of checking for [10%, 100%), check for (0%, 100%),
that is everything < 100% and >0%.
Gbp-Dch: ignore
|
|
This should make the test work on non-amd64 systems
Gbp-Dch: ignore
|
|
Trying to clean up directories which do not exist seems rather silly if
you think about it, so let apt think about it and stop it.
Depends a bit on the caller if this is fixing anything for them as they
might try to acquire a lock or doing other clever things as apt does.
Closes: 807477
|
|
Regression of 1e064088bf7b3e29cd36d30760fb3e4143a1a49a (1.1~exp4) which
moved code around and renamed methods heavily ending up calling the
wrong method matching packagenames only instead of calling the full
array. Most commands work with versions, so this managed to fly under
the radar for quite a while.
Closes: 807870
|
|
If we can't work with the hashes we parsed from the Release file we
display now an error message if the Release file includes only weak
hashes instead of downloading the indexes and failing to verify them
with "Hash Sum mismatch" even through the hashes didn't mismatch (they
were just weak).
If for some (unlikely) reason we have got weak hashes only for
individual targets we will show a warning to this effect (again, befor
downloading and failing the index itself).
Closes: 806459
|
|
dpkg does that when reading package files, so we should do
the same. This only deals with parsing names from binary
package paragraphs, it does not look at source package names
and/or the list of binaries in a dsc file.
Closes: #807012
|
|
Gbp-Dch: ignore
|
|
required and important were swapped, leading to wrong
output.
Closes: #807523
Thanks: Manuel A. Fernandez Montecelo for discovering this
|
|
After e75e5879 the reason for an implicit dependency on debianutils
(which is essential for debian, but likely not on other systems) was
just two uses of run-parts, which can be replaced with the a lot more
portable find-piped-into-sort duo.
|
|
which is a debian specific tool packaged in debianutils (essential)
while command is a shell builtin defined by POSIX.
Closes: 807144
Thanks: Mingye Wang for the suggestion.
|
|
This should make it more obvious that CHANGEPATH is a placeholder which
apt will replace with a package specific path rather than a string
constant.
Mail-Reference: <87d1upgvaf.fsf@deep-thought.43-1.org>
Mail-Archive: https://lists.debian.org/debian-dak/2015/12/msg00005.html
|
|
'Regression' of 7d19ee92f2368a40e739cb27d22d6d28f37ebf45, just that it
now works more as expected than previously. Of course, build-essentials
are implicitly also build dependencies, so by definition all packages
have build dependencies, but that isn't what this message wants to say
and it isn't what the user expects.
Git-Dch: Ignore
|
|
Otherwise a user is subject to unexpected content-injection depending on
which directory she happens to start apt in. This also cleans up the code
requiring less implementation details in build-dep which is always good.
Technically, this is an ABI break as we override virtual methods, but
that they weren't overridden was a mistake resulting in pure classes,
which shouldn't be pure, so they were unusable – and as they are new in
1.1 nobody is using them yet (and hopefully ever as they are borderline
implementation details).
Closes: 806693
|
|
Regression of 14341a7ee1ca3dbcdcdbe10ad19b947ce23d972d.
Reported-By: Julian Andres Klode <jak@debian.org>
|
|
Git-Dch: Ignore
|
|
The relevant testcases are in test/integration/test-apt-get-source.
There is a test for #731853 that is supposed to "ensure that apt will
pick the higher version number" of 0.0.1 (stable) and 0.1 (stable).
However, this works by pure chance, as simply reversing the order
of the two insertsource lines makes the test fail.
So #731853 isn't really fixed, yet.
Actually, that's related to the problem I reported, as the underlying
issue for both is the same:
In the FindSrc function apt chooses a new 'best hit', if either
* there is a target release and it matches the release of the package,
* or the version of the package is higher than the last best hit.
Consider having 1.0 (stable), 2.0 (unstable) and 1.5 (unstable),
in this order.
Looking for the version in stable, apt first selects 1.0, because the
release matches the target release, but then subsequently selects 2.0,
because the version is higher.
Looking for the version in unstable, apt first selects 2.0, because the
release matches the target release, but then subsequently selects 1.5,
because the release also matches the target release.
The correct way would be to choose a new 'best hit', if either
* there is a target release and it matches the release of the package,
* or there is no target release
and the version is higher than the last best hit.
Closes: 746412
Mail-Reference: <565A604B.7090104@googlemail.com>
Mail-Archive: https://lists.debian.org/debian-devel/2015/11/msg00470.html
|
|
Dropping privileges is an involved process for code and system alike so
ideally we want to verify that all the work wasn't in vain. Stuff
designed to sidestep the usual privilege checks like fakeroot (and its
many alternatives) have their problem with this through, partly through
missing wrapping (#806521), partly as e.g. regaining root from an
unprivileged user is in their design. This commit therefore disables
most of these checks by default so that apt runs fine again in a
fakeroot environment.
Closes: 806475
|
