summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2015-10-05Merge branch 'debian/sid' into ubuntu/masterMichael Vogt
2015-08-21Do not parse Status fields from remote sourcesJulian Andres Klode
This could allow an attacker to mark a package as installed in a remote package index, as long as the package was not listed in the dpkg status file. This way, an attacker could force the installation of a package during a dist-upgrade, by providing two packages in an index, an older marked as installed, and a newer - apt would "upgrade" to the newer version.
2015-08-03mark again deps of pkgs in APT::Never-MarkAuto-Sections as manualDavid Kalnischkies
In 50ef3344c3afaaf9943142906b2f976a0337d264 (and similar for other branches), while 'fixing' the edgecase of a package being in multiple sections (e.g. moved from libs to oldlibs in newer releases) I accidently broke the feature itself completely by operating on the package itself and no longer on its dependencies… The behaviour isn't ideal in multiple ways, which we are hopefully able to fix with new ideas as mentioned in the buglog, but until then the functionality of this "hack" should be restored. Reported-By: Raphaël Hertzog <hertzog@debian.org> Tested-By: Adam Conrad <adconrad@ubuntu.com> Closes: 793360 LP: 1479207 Thanks: Raphaël Hertzog and Adam Conrad for detailed reports and initial patches
2015-07-25fix apt-config test now that PATH changed in 8c617819David Kalnischkies
Which, in this cherrypick is actually 7491bed8. Git-Dch: Ignore
2015-07-25add BUILDDIRECTORY to PATH in the testsMichael Vogt
Git-Dch: Ignore
2015-05-22Merge branch 'debian/sid' into ubuntu/masterMichael Vogt
Conflicts: debian/changelog
2015-05-22Merge remote-tracking branch 'upstream/debian/jessie' into debian/sidMichael Vogt
Conflicts: apt-pkg/deb/dpkgpm.cc
2015-05-22Add regression test for LP: #1445239Michael Vogt
Add a regression test that reproduced the hang of apt when a partial file is present. Git-Dch: ignore
2015-05-22Fix endless loop in apt-get update that can cause disk fillupMichael Vogt
The apt http code parses Content-Length and Content-Range. For both requests the variable "Size" is used and the semantic for this Size is the total file size. However Content-Length is not the entire file size for partital file requests. For servers that send the Content-Range header first and then the Content-Length header this can lead to globbing of Size so that its less than the real file size. This may lead to a subsequent passing of a negative number into the CircleBuf which leads to a endless loop that writes data. Thanks to Anton Blanchard for the analysis and initial patch. LP: #1445239
2015-05-07Merge branch 'debian/jessie' into ubuntu/master1.0.9.9ubuntu1Michael Vogt
Conflicts: configure.ac debian/changelog
2015-04-22remove "first package seen is native package" assumptionDavid Kalnischkies
The fix for #777760 causes packages of foreign (and the native) architectures, to be created correctly, but invalidates (like the previously existing, but policy-forbidden architecture-less packages we had to support for some upgrade scenarios) the assumption that the first (and only) package in the cache for a single architecture system must be the package for the native architecture (as, where should the other architectures come from, right? Wrong.). Depending on the order of parsing sources more or less packages can be effected by this. The effects are strange (for apt it mostly effects simulation/debug output, but also apt-mark on these specific packages), which complicates debugging, but relatively harmless if understood as most actions do not need direct named access to packages. The problem is fixed by removing the single-arch special casing in the paths who had them (Cache.FindPkg), so they use the same code as multi-arch systems, which use them as a wrapper for Grp.FindPkg. Note that single-arch system code was using Grp.FindPkg before as well if a Grp structure was handily available, so we don't introduce new untested code here: We remove more brittle special cases which are less tested instead (this was planed to be done for Stretch anyhow). Note further that the method with the assumption itself isn't fixed. As it is a private method I opted for declaring it deprecated instead and remove all its call positions. As it is private no-one can call this method legally (thanks to how c++ works by default its still an exported symbol through) and fixing it basically means reimplementing code we already have in Grp.FindPkg. Removing rather than fixing seems hence like a good solution. Closes: 782777 Thanks: Axel Beckert for testing
2015-04-12parse specific-arch dependencies correctly on single-arch systemsDavid Kalnischkies
On single-arch the parsing was creating groupnames like 'apt:amd64' even through it should be 'apt' and a package in it belonging to architecture amd64. The result for foreign architectures was as expected: The dependency isn't satisfiable, but for native architecture it means the wrong package (ala apt:amd64:amd64) is linked so this is also not satisfiable, which is very much not expected. No longer excluding single-arch from this codepath allows the generation of the correct links, which still link to non-exisiting packages for foreign dependencies, but natives link to the expected native package just as if no architecture was given. For negative arch-specific dependencies ala Conflicts this matter was worse as apt will believe there isn't a Conflict to resolve, tricking it into calculating a solution dpkg will refuse. Architecture specific positive dependencies are rare in jessie – the only one in amd64 main is foreign –, negative dependencies do not even exist. Neither class has a native specimen, so no package in jessie is effected by this bug, but it might be interesting for stretch upgrades. This also means the regression potential is very low. Closes: 777760
2015-04-08Merge remote-tracking branch 'origin/debian/jessie' into ubuntu/masterMichael Vogt
Conflicts: apt-pkg/deb/dpkgpm.cc
2015-04-07keyids in "apt-key del" should be case-insensitiveDavid Kalnischkies
gnupg is case-insensitive about keyids, so back then apt-key called it directly any keyid was accepted, but now that we work more with the keyid ourself we regressed to require uppercase keyids by accident. This is also inconsistent with other apt-key commands which still use gnupg directly. A single case-insensitive grep and we are fine again. Closes: 781696
2015-03-23test/integration/test-apt-download-progress:Michael Vogt
- give apt more time to gather download data in test
2015-03-20Merge branch 'debian/sid' into ubuntu/masterMichael Vogt
2015-03-20test/integration/test-apt-download-progress: fix test failure on fast hardwareMichael Vogt
2015-03-13Merge branch 'debian/sid' into ubuntu/masterMichael Vogt
Conflicts: configure.ac debian/changelog
2015-01-10award points for positive dependencies againDavid Kalnischkies
Commit 9ec748ff103840c4c65471ca00d3b72984131ce4 from Feb 23 last year adds a version check after 8daf68e366fa9fa2794ae667f51562663856237c added 8 days earlier negative points for breaks/conflicts with the intended that only dependencies which are satisfied propagate points (aka: old conflicts do not). The implementation was needlessly complex and flawed through preventing positive dependencies from gaining points like they did before these commits making library transitions harder instead of simpler. It worked out anyhow most of the time out of pure 'luck' (and other ways of gaining points) or got miss attributed to being a temporary hick-up. Closes: 774924
2015-01-10128 KiB DSC files ought to be enough for everyoneDavid Kalnischkies
Your mileage may vary, but don't worry: There is more than one way to do it, but our one size fits all is not a bigger hammer, but an entire roundhouse kick! So brace yourself for the tl;dr: The limit is gone.* Beware: This fixes also the problem that a double newline is unconditionally added 'later' which is an overcommitment in case the dsc filesize is limit-2 <= x <= limit. * limited to numbers fitting into an unsigned long long. Closes: 774893
2015-01-06Add regression test for the previous commitMichael Vogt
The issue was that https.cc never called URIStart(), one way to detect this is that no download progress is generated without this call. The test now checks for this and as a side-effect will also ensure that we do not break download progress reporting and Acquire::{http,https}::Dl-Limit accidently.
2014-12-23pass-through stdin fd instead of content if not a terminalDavid Kalnischkies
Commit 299aea924ccef428219ed6f1a026c122678429e6 fixes the problem of not logging terminal in case stdin & stdout are not a terminal. The problem is that we are then trying to pass-through stdin content by reading from the apt-process stdin and writing it to the stdin of the child (dpkg), which works great for users who can control themselves, but pipes and co are a bit less forgiving causing us to pass everything to the first child process, which if the sending part of the pipe is e.g. 'yes' we will never see the end of it (as the pipe is full at some point and further writing blocks). There is a simple solution for that of course: If stdin isn't a terminal, we us the apt-process stdin as stdin for the child directly (We don't do this if it is a terminal to be able to save the typed input in the log). Closes: 773061
2014-12-23always run 'dpkg --configure -a' at the end of our dpkg callingsDavid Kalnischkies
dpkg checks now for dependencies before running triggers, so that packages can now end up in trigger states (especially those we are not touching at all with our calls) after apt is done running. The solution to this is trivial: Just tell dpkg to configure everything after we have (supposely) configured everything already. In the worst case this means dpkg will have to run a bunch of triggers, usually it will just do nothing though. The code to make this happen was already available, so we just flip a config option here to cause it to be run. This way we can keep pretending that triggers are an implementation detail of dpkg. --triggers-only would supposely work as well, but --configure is more robust in regards to future changes to dpkg and something we will hopefully make use of in future versions anyway (as it was planed at the time this and related options were implemented). Note that dpkg currently has a workaround implemented to allow upgrades to jessie to be clean, so that the test works before and after. Also note that test (compared to the one in the bug) drops the await test as its is considered a loop by dpkg now. Closes: 769609
2014-12-23do not make PTY slave the controlling terminalDavid Kalnischkies
If we have no controlling terminal opening a terminal will make this terminal our controller, which is a serious problem if this happens to be the pseudo terminal we created to run dpkg in as we will close this terminal at the end hanging ourself up in the process… The offending open is the one we do to have at least one slave fd open all the time, but for good measure, we apply the flag also to the slave fd opening in the child process as we set the controlling terminal explicitely here. This is a regression from 150bdc9ca5d656f9fba94d37c5f4f183b02bd746 with the slight twist that this usecase was silently broken before in that it wasn't logging the output in term.log (as a pseudo terminal wasn't created). Closes: 772641
2014-12-22dispose http(s) 416 error page as non-contentDavid Kalnischkies
Real webservers (like apache) actually send an error page with a 416 response, but our client didn't expect it leaving the page on the socket to be parsed as response for the next request (http) or as file content (https), which isn't what we want at all… Symptom is a "Bad header line" as html usually doesn't parse that well to an http-header. This manifests itself e.g. if we have a complete file (or larger) in partial/ which isn't discarded by If-Range as the server doesn't support it (or it is just newer, think: mirror rotation). It is a sort-of regression of 78c72d0ce22e00b194251445aae306df357d5c1a, which removed the filesize - 1 trick, but this had its own problems… To properly test this our webserver gains the ability to reply with transfer-encoding: chunked as most real webservers will use it to send the dynamically generated error pages. (The tests and their binary helpers had to be slightly modified to apply, but the patch to fix the issue itself is unchanged.) Closes: 768797
2014-11-28support long keyids in "apt-key del" instead of ignoring themJames McCoy
apt-key given a long keyid reports just "OK" all the time, but doesn't delete the mentioned key as it doesn't find the key. Note: In debian/experimental this was closed with 29f1b977100aeb6d6ebd38923eeb7a623e264ffe which just added the testcase as the rewrite of apt-key had fixed this as well. Closes: 754436
2014-11-28fix PTY interaction on linux and kfreebsdDavid Kalnischkies
We run dpkg on its own pty, so we can log its output and have our own output around it (like the progress bar), while also allowing debconf and configfile prompts to happen. In commit 223ae57d468fdcac451209a095047a07a5698212 we changed to constantly reopening the slave for kfreebsd. This has the sideeffect though that in some cases slave and master will lose their connection on linux, so that no output is passed along anymore. We fix this by having always an fd referencing the slave open (linux), but we don't use it (kfreebsd). Failing to get our PTY up and running has many (bad) consequences including (not limited to, nor all at ones or in any case) garbled ouput, no output, no logging, a (partial) mixture of the previous items, … This commit is therefore also reshuffling quiet a bit of the creation code to get especially the output part up and running on linux and the logging for kfreebsd. Note that the testcase tries to cover some cases, but this is an interactivity issue so only interactive usage can really be a good test. Closes: 765687
2014-11-28close leaking slave fd after setting up pty magicDavid Kalnischkies
The fd moves out of scope here anyway, so we should close it properly instead of leaking it which will tickle down to dpkg maintainer scripts. Closes: 767774
2014-11-10reenable support for -s (and co) in apt-get sourceDavid Kalnischkies
The conversion to accept only relevant options for commands has forgotten another one, so adding it again even through the usecase might very well be equally good served by --print-uris. Closes: 742578
2014-11-10allow options between command and -- on commandlineDavid Kalnischkies
This used to work before we implemented a stricter commandline parser and e.g. the dd-schroot-cmd command constructs commandlines like this. Reported-By: Helmut Grohne
2014-11-10use 'best' hash for source authenticationDavid Kalnischkies
Collect all hashes we can get from the source record and put them into a HashStringList so that 'apt-get source' can use it instead of using always the MD5sum. We therefore also deprecate the MD5 struct member in favor of the list. While at it, the parsing of the Files is enhanced so that records which miss "Files" (aka MD5 checksums) are still searched for other checksums as they include just as much data, just not with a nice and catchy name. This is a cherry-pick of 1262d35 with some dirty tricks to preserve ABI. LP: 1098738
2014-11-10add a simple container for HashStringsDavid Kalnischkies
APT supports more than just one HashString and even allows to enforce the usage of a specific hash. This class is intended to help with storage and passing around of the HashStrings. The cherry-pick here the un-const-ification of HashType() compared to f4c3850ea335545e297504941dc8c7a8f1c83358. The point of this commit is adding infrastructure for the next one. All by itself, it just adds new symbols. Git-Dch: Ignore
2014-11-03Merge branch 'debian/sid' into ubuntu/masterMichael Vogt
Conflicts: debian/changelog
2014-10-17don't cleanup cdrom files in apt-get updateDavid Kalnischkies
Regression from merging 801745284905e7962aa77a9f37a6b4e7fcdc19d0 and b0f4b486e6850c5f98520ccf19da71d0ed748ae4. While fine by itself, merged the part fixing the filename is skipped if a cdrom source is encountered, so that our list-cleanup removes what seems to be orphaned files. Closes: 765458
2014-10-15don't cleanup cdrom files in apt-get updateDavid Kalnischkies
Regression from merging 801745284905e7962aa77a9f37a6b4e7fcdc19d0 and b0f4b486e6850c5f98520ccf19da71d0ed748ae4. While fine by itself, merged the part fixing the filename is skipped if a cdrom source is encountered, so that our list-cleanup removes what seems to be orphaned files. Closes: 765458
2014-10-08Merge branch 'debian/sid' into ubuntu/masterMichael Vogt
Conflicts: configure.ac debian/changelog
2014-10-06implement the updated build profile specjosch
2014-09-25rewrite compressed indexes test to check with all compressorsDavid Kalnischkies
Git-Dch: Ignore
2014-09-21generalize Acquire::GzipIndexMichael Vogt
2014-09-20relax grep to support newer curl output formatDavid Kalnischkies
Git-Dch: Ignore
2014-09-19Fix regression when copy: is used for a relative pathMichael Vogt
When we do a ReverifyAfterIMS() we use the copy: method to verify the hashes again. If the user uses -o Dir=./something/relative this fails because we use the URI class in copy.cc that strips away the leading relative part. By not using URI this is fixed. Closes: #762160
2014-09-19test/integration/test-apt-update-file: improve testMichael Vogt
2014-09-17Merge branch 'debian/sid' into ubuntu/masterMichael Vogt
Conflicts: debian/changelog
2014-09-17improve test for commit daff4aMichael Vogt
2014-09-17Fix regression for file:/// uris from CVE-2014-0487Michael Vogt
Do not run ReverifyAfterIMS() for local file URIs as this will causes apt to mess around in the file:/// uri space. This is wrong in itself, but it will also cause a incorrect verification failure when the archive and the lists directory are on different partitions as rename().
2014-09-16prepare 1.0.8ubuntu3Michael Vogt
2014-09-16SECURITY UPDATE for CVE-2014-{0488,0487,0489}Michael Vogt
incorrect invalidating of unauthenticated data (CVE-2014-0488) incorect verification of 304 reply (CVE-2014-0487) incorrect verification of Acquire::Gzip indexes (CVE-2014-0489)
2014-09-10Merge branch 'debian/sid' into ubuntu/masterMichael Vogt
Conflicts: configure.ac debian/changelog doc/apt-verbatim.ent doc/po/apt-doc.pot doc/po/de.po doc/po/es.po doc/po/fr.po doc/po/it.po doc/po/ja.po doc/po/pl.po doc/po/pt.po doc/po/pt_BR.po po/apt-all.pot po/ar.po po/ast.po po/bg.po po/bs.po po/ca.po po/cs.po po/cy.po po/da.po po/de.po po/dz.po po/el.po po/es.po po/eu.po po/fi.po po/fr.po po/gl.po po/hu.po po/it.po po/ja.po po/km.po po/ko.po po/ku.po po/lt.po po/mr.po po/nb.po po/ne.po po/nl.po po/nn.po po/pl.po po/pt.po po/pt_BR.po po/ro.po po/ru.po po/sk.po po/sl.po po/sv.po po/th.po po/tl.po po/tr.po po/uk.po po/vi.po po/zh_CN.po po/zh_TW.po
2014-09-09don't call pager in non-terminals for changelogDavid Kalnischkies
Most pagers are nice and default to running non-interactively if they aren't connected to a terminal and we relied on that. On ci.debian.net the configured pager is printing a header out of nowhere though, so if we are printing to a non-terminal we call "cat" instead. In the rework we also "remove" the dependency on sensible-utils in sofar as we call some alternatives if calling the utils fail. This seems to be the last problem preventing a "PASS" status on ci.debian.net, so we close the associated bugreport. Closes: 755040
2014-09-08fix progress report for upgrade and reinstallDavid Kalnischkies
APT treats upgrades like installs and dpkg is very similar in this, but prints still a slightly different processing message indicating that it is really an upgrade which we hadn't parsed so far, but this wasn't really visible as we quickly moved on to a 'known' state. More problematic was the reinstall case as apt hadn't recognized this for the package name detection, so that reinstalls had no progress since we introduced MultiArch.