| Age | Commit message (Collapse) | Author |
|---|
|
APT supported versioned provides for a long while in an attempt to get
it working with rpm. While this support is old, we can be relatively
sure that it works as versioned provides are used internally to make
Multi-Arch:foreign work.
Previous versions of apt will print a warning indicating that the
versioned provides is ignored, so that something which "Provides: foo (=
2)" doesn't provide anything.
Note that dpkg does allow only a equals-relation in the provides line
as anything else is deemed too complex. apt doesn't support anything
else either and such a support would require potentially big changes.
Closes: 758153
|
|
With the change of SmartConfigure() in git commit 42d51f the ordering
code was trying to re-order dependencies, even when at this point in
time this was not needed. Now it will first check all targets of the
given dependency and only if there is not a good one try to reorder
and unpack/configure as needed.
Closes: LP: #1347721
|
|
StringToBool uses strtol() internally to check if the argument is
a number. This function stops when it does not find any more numbers.
So a string like "0ad" (which is a valid packagename) is interpreted
as a "0". The code now checks that the entire string is consumed
not just a part of it. Thanks to Johannes Schauer for raising this
issue.
|
|
|
|
The behaviour of echo "\tA\t" differs between dash/zsh which interprets
the \t as tab and bash which prints it literally. Similar things happen
for other escape sequences – without the -e flag.
Switching to printf makes this more painless^Wportable, so that the
tests are also working correctly with bash as sh.
(commit message by committer, patch otherwise unmodified)
|
|
Git-Dch: ignore
|
|
bash as sh doesn't like it, too.
Git-Dch: Ignore
|
|
|
|
The name suggests that it is supposed to substitute a variable with a
value, but we tend to use it in a more liberal replace_all() fashion,
but this breaks if either of the parameters is empty or more importantly
if two "variable" occurrences follow each other directly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
'mvo/bugfix/apt-get-source-unauthenticated-warning' into debian/sid
|
|
|
|
Closes: 742835
|
|
In commit 21b3eac8 I promoted the check for installable dependencies to
a pre-install check, which also reverts to a known good candidate (the
installed version) if it fails. This revert was done even for user
requested candidate switches which disabled our Broken detection so that
install requests which are impossible to satisfy do not fail anymore,
but print an (incomplete) solution proposal and then exit successfully.
Closes: 745046
|
|
|
|
This will show the same unauthenticated warning for source packages
as for binary packages and will not download a source package if
it is unauthenticated. This can be overridden with
--allow-unauthenticated
Closes: #749795
|
|
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
Adds also a small testcase for EDSP
Git-Dch: Ignore
|
|
|
|
dpkg on Ubuntu 12.04 does not seem to support parsing arch-specific
dependencies, so we try to detect if we face such a dpkg in the test.
In the other test the order depends on libdb, which changes per arch, so
we just run it through our sorting binary and be happy (hopefully).
Git-Dch: Ignore
|
|
Reported-By: scan-build
|
|
As outlined in #748355 apt segfaulted if it encountered a loop between a
package pre-depending on a package conflicting with the previous as it
ended up in an endless loop trying to unpack 'the other package'.
In this specific case as an essential package is involved a lot of force
needs to be applied, but can also be caused by 'normal' tight loops and
highlights a problem in how we handle breaks which we want to avoid.
The fix comes in multiple entangled changes:
1. All Smart* calls are guarded with loop detection. Some already had it,
some had parts of it, some did it incorrect, and some didn't even try.
2. temporary removes to avoid a loop (which is done if a loop is
detected) prevent the unpack of this looping package (we tried to unpack
it to avoid the conflict/breaks, but due to a loop we couldn't, so we
remove/deconfigure it instead which means we can't unpack it now)
3. handle conflicts and breaks very similar instead of duplicating most
of the code. The only remaining difference is, as it should:
deconfigure is enough for breaks, for conflicts we need the big hammer
|
|
Git-Dch: Ignore
|
|
Closes: 748389
|
|
In bugreport #747261 I confirmed with this testcase that apt actually
supports the requested architecture-specific conflicts already since
2012 with commit cef094c2ec8214b2783a2ac3aa70cf835381eae1.
The old test only does simulations which are handy to check apt,
this one builds 'real' packages to see if dpkg agrees with us.
Git-Dch: Ignore
|
|
Version/Architecture information in a Translation-$lang file is
not allowed, so don't try to parse it. This is a fix for a bugreport
where a Translation-en file contained the content of the regular
Packages file (probably due to local FS corruption). This lead to
strange error messages on file download.
Thanks to Thomas Reusch for the report.
|
|
|
|
debian/sid
|
|
Closes: 746434
|
|
The bugreport highlights the problem with an empty package name. We fix
this by 'ignoring' these so that it behaves just like "apt-get install".
The deeper problem is that modifier strings can be longer than a package
name in which case the comparison doesn't make sense, so don't compare
then. Was not noticed so far as all modifiers are of length 1, so the
only package name shorter than this is in fact the empty package name.
Closes: 744940
|
|
My commit 45df0ad2 from 26. Nov 2009 had a little remark:
"The commit also includes a very very simple testapp."
This was never intended to be permanent, but as usually…
The commit adds the needed make magic to compile gtest statically
as it is required and links it against a small runner. All previous
testcase binaries are reimplemented in gtest and combined in this
runner. While most code is a 1:1 translation some had to be rewritten
like compareversion_test.cc, but the coverage remains the same.
|
|
fseek and co do this to their eof-flags and it is more logic this way as
we will usually seek away from the end (e.g. to re-read the file).
The commit also improves the testcase further and adds a test for the
binary compressor codepath (as gz, bzip2 and xz are handled by
libraries) via the use of 'rev' as a 'compressor'.
|
|
Conflicts:
test/integration/test-apt-cli-list
|
|
|
|
A package which can't be downloaded anymore is very likely dropped from
a release and can therefore no longer be 'standard' (or similar). We
therefore do not grant points for them anymore and demote them to
prio:extra instead which helps other packages breaking them away even if
they have a lower priority.
The testcase was initially created by Michael Vogt and just amended.
|
|
We now do Open, Write and Read (the later multiple ways) for each
permission and each compressor we have configured to cover more cases
and especially ensure that compressors do not change our premissions.
This test is also to be credited for discovering the skippos-fix.
Git-Dch: Ignore
|
|
|
|
Commit 7335eebea6dd43581d4650a8818b06383ab89901 introduced a bug
that caused FileFd to create insecure permissions when FileFd::Atomic
is used. This commit fixes the permissions and adds a test.
The bug is most likely caused by the confusing "Perm" parameter
that is passed to Open() - its not the file permissions but intead
the "mode" part of open/creat.
|
|
If the user is using "apt list pattern" and there is only a single
hit, notice about "--all-versions" as this is what the user may
be interessted in
|
|
This patch should fix spurious test failures in jenkins or travis
that are caused by a race condition in the {stunnel,aptwebserver}.pid
file creation
|
|
Packages in the "deinstall ok config-file" have no candidate or
instaleld version. So they must be special cased in the apt list
generation.
|
|
|
|
|
|
|
