summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2014-05-30support parsing EDSP requests Architecture{,s} stanzaDavid Kalnischkies
Adds also a small testcase for EDSP Git-Dch: Ignore
2014-05-29Merge remote-tracking branch 'mvo/debian/sid' into debian/sidMichael Vogt
2014-05-29(try to) fix travis-ci build failuresDavid Kalnischkies
dpkg on Ubuntu 12.04 does not seem to support parsing arch-specific dependencies, so we try to detect if we face such a dpkg in the test. In the other test the order depends on libdb, which changes per arch, so we just run it through our sorting binary and be happy (hopefully). Git-Dch: Ignore
2014-05-28Fix uninitialized valueMichael Vogt
Reported-By: scan-build
2014-05-22fix tight loop detection and temporary removesDavid Kalnischkies
As outlined in #748355 apt segfaulted if it encountered a loop between a package pre-depending on a package conflicting with the previous as it ended up in an endless loop trying to unpack 'the other package'. In this specific case as an essential package is involved a lot of force needs to be applied, but can also be caused by 'normal' tight loops and highlights a problem in how we handle breaks which we want to avoid. The fix comes in multiple entangled changes: 1. All Smart* calls are guarded with loop detection. Some already had it, some had parts of it, some did it incorrect, and some didn't even try. 2. temporary removes to avoid a loop (which is done if a loop is detected) prevent the unpack of this looping package (we tried to unpack it to avoid the conflict/breaks, but due to a loop we couldn't, so we remove/deconfigure it instead which means we can't unpack it now) 3. handle conflicts and breaks very similar instead of duplicating most of the code. The only remaining difference is, as it should: deconfigure is enough for breaks, for conflicts we need the big hammer
2014-05-22make test independent from the actual Install-SizeDavid Kalnischkies
Git-Dch: Ignore
2014-05-16add an additional test for arch specific conflictsDavid Kalnischkies
In bugreport #747261 I confirmed with this testcase that apt actually supports the requested architecture-specific conflicts already since 2012 with commit cef094c2ec8214b2783a2ac3aa70cf835381eae1. The old test only does simulations which are handy to check apt, this one builds 'real' packages to see if dpkg agrees with us. Git-Dch: Ignore
2014-05-15Never parse Version/Architecture tags in a Translation-$lang fileMichael Vogt
Version/Architecture information in a Translation-$lang file is not allowed, so don't try to parse it. This is a fix for a bugreport where a Translation-en file contained the content of the regular Packages file (probably due to local FS corruption). This lead to strange error messages on file download. Thanks to Thomas Reusch for the report.
2014-05-07show progress in run-testsMichael Vogt
2014-05-07Merge remote-tracking branch 'mvo/feature/apt-ftparchive-srccache2' into ↵Michael Vogt
debian/sid
2014-04-30Only do openpty() if both stdin/stdout are terminalsMichael Vogt
Closes: 746434
2014-04-26handle pkgnames shorter than modifiersDavid Kalnischkies
The bugreport highlights the problem with an empty package name. We fix this by 'ignoring' these so that it behaves just like "apt-get install". The deeper problem is that modifier strings can be longer than a package name in which case the comparison doesn't make sense, so don't compare then. Was not noticed so far as all modifiers are of length 1, so the only package name shorter than this is in fact the empty package name. Closes: 744940
2014-04-16use Google C++ Testing Framework for libapt testsDavid Kalnischkies
My commit 45df0ad2 from 26. Nov 2009 had a little remark: "The commit also includes a very very simple testapp." This was never intended to be permanent, but as usually… The commit adds the needed make magic to compile gtest statically as it is required and links it against a small runner. All previous testcase binaries are reimplemented in gtest and combined in this runner. While most code is a 1:1 translation some had to be rewritten like compareversion_test.cc, but the coverage remains the same.
2014-04-16clear HitEof flag in FileFd::SeekDavid Kalnischkies
fseek and co do this to their eof-flags and it is more logic this way as we will usually seek away from the end (e.g. to re-read the file). The commit also improves the testcase further and adds a test for the binary compressor codepath (as gz, bzip2 and xz are handled by libraries) via the use of 'rev' as a 'compressor'.
2014-04-11Merge remote-tracking branch 'mvo/feature/helpful-apt-list' into debian/sidMichael Vogt
Conflicts: test/integration/test-apt-cli-list
2014-04-11Merge remote-tracking branch 'mvo/bugfix/apt-list-rc-pkgs' into debian/sidMichael Vogt
2014-04-11consider priorities only for downloadable pkgs in resolverDavid Kalnischkies
A package which can't be downloaded anymore is very likely dropped from a release and can therefore no longer be 'standard' (or similar). We therefore do not grant points for them anymore and demote them to prio:extra instead which helps other packages breaking them away even if they have a lower priority. The testcase was initially created by Michael Vogt and just amended.
2014-04-11extend FileFd test behond basic permission testsDavid Kalnischkies
We now do Open, Write and Read (the later multiple ways) for each permission and each compressor we have configured to cover more cases and especially ensure that compressors do not change our premissions. This test is also to be credited for discovering the skippos-fix. Git-Dch: Ignore
2014-04-10fix test-failure in adtMichael Vogt
2014-04-10Fix insecure file permissions when using FileFd with OpenMode::AtomicMichael Vogt
Commit 7335eebea6dd43581d4650a8818b06383ab89901 introduced a bug that caused FileFd to create insecure permissions when FileFd::Atomic is used. This commit fixes the permissions and adds a test. The bug is most likely caused by the confusing "Perm" parameter that is passed to Open() - its not the file permissions but intead the "mode" part of open/creat.
2014-04-09Notice the user about "apt list -a" when only a single hit if foundMichael Vogt
If the user is using "apt list pattern" and there is only a single hit, notice about "--all-versions" as this is what the user may be interessted in
2014-04-09Fix possible race when stunnel/aptwebserver create their PID filesMichael Vogt
This patch should fix spurious test failures in jenkins or travis that are caused by a race condition in the {stunnel,aptwebserver}.pid file creation
2014-04-08fix apt list output for pkgs in dpkg ^rc stateMichael Vogt
Packages in the "deinstall ok config-file" have no candidate or instaleld version. So they must be special cased in the apt list generation.
2014-04-08Merge branch 'bugfix/apt-search-case' into debian/sidMichael Vogt
2014-04-07make apt search case-insensitive by defaultMichael Vogt
2014-04-07ensure "--db" also works with the new srcpkgdbMichael Vogt
2014-04-04ensure clean worksMichael Vogt
2014-04-04add test for binary cachedb and contents generationMichael Vogt
2014-04-04Implement CacheDB for source packages in apt-ftparchiveMichael Vogt
2014-03-27Merge branch 'debian/sid' into feature/more-fancy-progressMichael Vogt
2014-03-27Merge remote-tracking branch 'upstream/debian/sid' into debian/sidMichael Vogt
2014-03-27Use mkstemp() in apt-extracttemplaes (closes: #741627)Michael Vogt
Use mkstemp() in apt-extractemplates and add a integrationtest for apt-extracttemplates too. Thanks to Steve Kemp for the report.
2014-03-27Add progressbar to "Dpkg::Progress-Fancy"Michael Vogt
A text progressbar is now displayed in the Dpkg::Progress-Fancy mode. It can be turned off via the apt option Dpkg::Progress-Fancy::Progress-Bar=false
2014-03-23discard candidates via IsInstallOk to allow overrideDavid Kalnischkies
In commit 446551c8 I changed MarkInstall to discard the candidate if the candidate can't satisfy the dependency. This breaks interactive solvers like aptitude which can change the candidate on-the-fly later. In commit df77d8a5 I introduced this 'early' loop-breaking to begin with which can't be that helpful for interactive solvers as well, but makes perfect sense for non-interactives to stop them from exploring trees which can't be satisfied, but it isn't perfect as ideally we would check this before auto-installing the first dependency. This commit therefore moves the loop into its own IsInstallOk hook so that frontends can override this check if they want to and in exchange removes the loop-breaking from MarkInstall itself and does it before any dependency is installed. Closes: 740750
2014-03-22ensure proper teardown in dpkg error casesDavid Kalnischkies
We have to properly close our pseudo terminals even in error cases before we call post-invoke scripts. This is done now by breaking from the dpkg calling loop instead of copying the handling, which did it in the wrong order before. This also ensures that our state file is written in error cases to record autobit and co as this was forgotten before. Closes: 738969
2014-03-21add testcase for APT::Architectures "arch1,arch2"David Kalnischkies
Git-Dch: Ignore
2014-03-21only consider versioned kernel packages in autoremoveDavid Kalnischkies
Metapackages like "linux-image-amd64" are otherwise matched by our extraction as well, which later on can't be successfully compared via dpkg --compare-versions as the 'amd64' bit isn't a version number. (Luckily none of our architectures starts with a digit.) This was broken by me in 0.9.16 as I moved a shell-glob matcher to a regex-based one which has slightly different semantics regarding '*'. Closes: 741962
2014-03-14fix test/integration/test-apt-helperMichael Vogt
2014-03-13ensure that gz compression test is run with gzDavid Kalnischkies
The framework can be configured to use different compression algorithms to test different ones, but a testcase testing for gz support should always be run with gz, regardless of what compressions are configured otherwise. Git-Dch: Ignore
2014-03-13factor out getting list of architectures from comma listDavid Kalnischkies
Beside fixing this minor code duplication it also resolves the problem of messing up vim syntax-highlighting. Git-Dch: Ignore
2014-03-13correct LD_LIBRARY_PATH and config loading for apt-helperDavid Kalnischkies
Mostly ensures that we use the build methods and not the system provided methods in the tests (if we don't want it that way). Git-Dch: Ignore
2014-03-13ensure that a dot is a dot in the hookDavid Kalnischkies
As we deal with regex matchers here the dots are treated as wildcards if we don't take care of escaping them. Not very likely that this could be a real-world problem, but just to be sure.
2014-03-13support kfreebsd and hurd in the kernel hookDavid Kalnischkies
kfreebsd as well as hurd kernel packages call the postinst script as well so we just need to enable the correct parsing for installed packages and disable the "protect every version" hammer for them.
2014-03-13use a configurable list of versioned kernel packagesDavid Kalnischkies
With APT::VersionedKernelPackages users have the option of adding packages like pre-build out-of-tree modules to the list of automatically protected from being autoremoved.
2014-03-13improve debug output in case downloadfile failsDavid Kalnischkies
Git-Dch: Ignore
2014-03-13msgstr with elipses need three dotsDavid Kalnischkies
fixes some messages and their translation so that all of them have three dots for messages with an elipse. Many translations already had this.
2014-03-13support very long mtab entries in mountpoint discoveryDavid Kalnischkies
Old code limited lines to 250 characters which is probably enough for everybody, but who knows… It also takes care of device nodes which start with the same prefix.
2014-03-13enable mount support for apt-cdrom in the testsDavid Kalnischkies
Git-Dch: Ignore
2014-03-13simplify apt-cdrom testcodeDavid Kalnischkies
Git-Dch: Ignore
2014-03-13do not configure already unpacked packages needlesslyDavid Kalnischkies
The unpack of a M-A:same package will force the unpack of all its siblings directly to prevent that they could be separated by later immediate actions. In commit 634985f8 a call to SmartConfigure was introduced to configure these packages at the time the installation order encounters them. Usually, the unpack order is already okay, so that this 'earlier' unpack was not needed and if it wouldn't have been done, the package would now only be unpacked, but by configuring the package now we impose new requirements which must be satisfied. The code is clever enough to handle this most of the time (it worked for 2 years!), but it isn't needed and in very coupled cases this can fail. Removing this call again removes this extra burden and so simplifies the ordering as can be seen in the modified tests. Famous last words, but I don't see a reason for this extra burden to exist hence the remove. Closes: 740843