summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2014-04-11extend FileFd test behond basic permission testsDavid Kalnischkies
We now do Open, Write and Read (the later multiple ways) for each permission and each compressor we have configured to cover more cases and especially ensure that compressors do not change our premissions. This test is also to be credited for discovering the skippos-fix. Git-Dch: Ignore
2014-04-10fix test-failure in adtMichael Vogt
2014-04-10Fix insecure file permissions when using FileFd with OpenMode::AtomicMichael Vogt
Commit 7335eebea6dd43581d4650a8818b06383ab89901 introduced a bug that caused FileFd to create insecure permissions when FileFd::Atomic is used. This commit fixes the permissions and adds a test. The bug is most likely caused by the confusing "Perm" parameter that is passed to Open() - its not the file permissions but intead the "mode" part of open/creat.
2014-04-09Fix possible race when stunnel/aptwebserver create their PID filesMichael Vogt
This patch should fix spurious test failures in jenkins or travis that are caused by a race condition in the {stunnel,aptwebserver}.pid file creation
2014-04-08Merge branch 'bugfix/apt-search-case' into debian/sidMichael Vogt
2014-04-07make apt search case-insensitive by defaultMichael Vogt
2014-03-27Merge branch 'debian/sid' into feature/more-fancy-progressMichael Vogt
2014-03-27Merge remote-tracking branch 'upstream/debian/sid' into debian/sidMichael Vogt
2014-03-27Use mkstemp() in apt-extracttemplaes (closes: #741627)Michael Vogt
Use mkstemp() in apt-extractemplates and add a integrationtest for apt-extracttemplates too. Thanks to Steve Kemp for the report.
2014-03-27Add progressbar to "Dpkg::Progress-Fancy"Michael Vogt
A text progressbar is now displayed in the Dpkg::Progress-Fancy mode. It can be turned off via the apt option Dpkg::Progress-Fancy::Progress-Bar=false
2014-03-23discard candidates via IsInstallOk to allow overrideDavid Kalnischkies
In commit 446551c8 I changed MarkInstall to discard the candidate if the candidate can't satisfy the dependency. This breaks interactive solvers like aptitude which can change the candidate on-the-fly later. In commit df77d8a5 I introduced this 'early' loop-breaking to begin with which can't be that helpful for interactive solvers as well, but makes perfect sense for non-interactives to stop them from exploring trees which can't be satisfied, but it isn't perfect as ideally we would check this before auto-installing the first dependency. This commit therefore moves the loop into its own IsInstallOk hook so that frontends can override this check if they want to and in exchange removes the loop-breaking from MarkInstall itself and does it before any dependency is installed. Closes: 740750
2014-03-22ensure proper teardown in dpkg error casesDavid Kalnischkies
We have to properly close our pseudo terminals even in error cases before we call post-invoke scripts. This is done now by breaking from the dpkg calling loop instead of copying the handling, which did it in the wrong order before. This also ensures that our state file is written in error cases to record autobit and co as this was forgotten before. Closes: 738969
2014-03-21add testcase for APT::Architectures "arch1,arch2"David Kalnischkies
Git-Dch: Ignore
2014-03-21only consider versioned kernel packages in autoremoveDavid Kalnischkies
Metapackages like "linux-image-amd64" are otherwise matched by our extraction as well, which later on can't be successfully compared via dpkg --compare-versions as the 'amd64' bit isn't a version number. (Luckily none of our architectures starts with a digit.) This was broken by me in 0.9.16 as I moved a shell-glob matcher to a regex-based one which has slightly different semantics regarding '*'. Closes: 741962
2014-03-14fix test/integration/test-apt-helperMichael Vogt
2014-03-13ensure that gz compression test is run with gzDavid Kalnischkies
The framework can be configured to use different compression algorithms to test different ones, but a testcase testing for gz support should always be run with gz, regardless of what compressions are configured otherwise. Git-Dch: Ignore
2014-03-13factor out getting list of architectures from comma listDavid Kalnischkies
Beside fixing this minor code duplication it also resolves the problem of messing up vim syntax-highlighting. Git-Dch: Ignore
2014-03-13correct LD_LIBRARY_PATH and config loading for apt-helperDavid Kalnischkies
Mostly ensures that we use the build methods and not the system provided methods in the tests (if we don't want it that way). Git-Dch: Ignore
2014-03-13ensure that a dot is a dot in the hookDavid Kalnischkies
As we deal with regex matchers here the dots are treated as wildcards if we don't take care of escaping them. Not very likely that this could be a real-world problem, but just to be sure.
2014-03-13support kfreebsd and hurd in the kernel hookDavid Kalnischkies
kfreebsd as well as hurd kernel packages call the postinst script as well so we just need to enable the correct parsing for installed packages and disable the "protect every version" hammer for them.
2014-03-13use a configurable list of versioned kernel packagesDavid Kalnischkies
With APT::VersionedKernelPackages users have the option of adding packages like pre-build out-of-tree modules to the list of automatically protected from being autoremoved.
2014-03-13improve debug output in case downloadfile failsDavid Kalnischkies
Git-Dch: Ignore
2014-03-13msgstr with elipses need three dotsDavid Kalnischkies
fixes some messages and their translation so that all of them have three dots for messages with an elipse. Many translations already had this.
2014-03-13support very long mtab entries in mountpoint discoveryDavid Kalnischkies
Old code limited lines to 250 characters which is probably enough for everybody, but who knows… It also takes care of device nodes which start with the same prefix.
2014-03-13enable mount support for apt-cdrom in the testsDavid Kalnischkies
Git-Dch: Ignore
2014-03-13simplify apt-cdrom testcodeDavid Kalnischkies
Git-Dch: Ignore
2014-03-13do not configure already unpacked packages needlesslyDavid Kalnischkies
The unpack of a M-A:same package will force the unpack of all its siblings directly to prevent that they could be separated by later immediate actions. In commit 634985f8 a call to SmartConfigure was introduced to configure these packages at the time the installation order encounters them. Usually, the unpack order is already okay, so that this 'earlier' unpack was not needed and if it wouldn't have been done, the package would now only be unpacked, but by configuring the package now we impose new requirements which must be satisfied. The code is clever enough to handle this most of the time (it worked for 2 years!), but it isn't needed and in very coupled cases this can fail. Removing this call again removes this extra burden and so simplifies the ordering as can be seen in the modified tests. Famous last words, but I don't see a reason for this extra burden to exist hence the remove. Closes: 740843
2014-03-13follow method attribute suggestions by gccDavid Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wsuggest-attribute={pure,const,noreturn}
2014-03-13cleanup headers and especially #includes everywhereDavid Kalnischkies
Beside being a bit cleaner it hopefully also resolves oddball problems I have with high levels of parallel jobs. Git-Dch: Ignore Reported-By: iwyu (include-what-you-use)
2014-03-13warning: unused parameter ‘foo’ [-Wunused-parameter]David Kalnischkies
Reported-By: gcc -Wunused-parameter Git-Dch: Ignore
2014-03-13warning: type qualifiers ignored on function return type [-Wignored-qualifiers]David Kalnischkies
Reported-By: gcc -Wignored-qualifiers Git-Dch: Ignore
2014-03-13warning: no previous declaration for foobar() [-Wmissing-declarations]David Kalnischkies
Git-Dch: Ignore Reported-By: gcc -Wmissing-declarations
2014-03-13unset LANGUAGE in the testing framework directlyDavid Kalnischkies
Git-Dch: Ignore
2014-03-13support DEB_BUILD_PROFILES and -P for build profilesDavid Kalnischkies
Inspired by the rest of the patch in 661537, but abstract the parsing of various ways of setting the build profiles more so it can potentially be reused and all apt parts have the same behaviour. Especially config options, cmdline options and environment will not be combined as proposed as this isn't APTs usual behaviour and dpkg doesn't do it either, so one overrides the other as it normally does.
2014-03-13implement BuildProfileSpec support as dpkg has in 1.17.2Johannes Schauer
Build-dependencies are now able to include a <profile.foo …> specification limiting usage similar to already supported [arch …]. More details: https://wiki.debian.org/BuildProfileSpec Closes: 661537
2014-03-13add default and override handling for Cnf::FindVectorDavid Kalnischkies
Automatically handle the override of list options via its parent value which can even be a comma-separated list of values. It also adds an easy way of providing a default for the list.
2014-03-13check version before adding scores in resolverDavid Kalnischkies
Prevents that "old" dependencies have an influence in the scoring. With positive dependencies this is usually not a problem, but negative dependencies can linger around for a long time.
2014-03-13show debug output only if told so in packagemanagerDavid Kalnischkies
Git-Dch: Ignore
2014-03-13propagate a negative score point along breaks/conflictsDavid Kalnischkies
versioned -dev packages like db and boost have the problem of no dependencies which would give them a competitive advantage against an older incarnation of the -dev package, so they tend to be kept back until the old version is removed from the archive, which, if the user has older releases in its sources can take a long time (or never happens). The newer version has a conflicts/breaks against the older one, but the older one hasn't against the newer, so by giving via the conflicts the older one a reduced score the newer one can win if there is no other reason to keep it. If both have a conflict against each other the scoring will cancel itself out, so no harm done. This gives "action" a slightly bigger edge in breaks/conflicts cases than before, but holding back isn't a really good solution anyway.
2014-03-12Merge remote-tracking branch 'upstream/debian/sid' into ↵Michael Vogt
feature/apt-download-file Conflicts: cmdline/apt-helper.cc test/integration/framework test/integration/test-apt-https-no-redirect
2014-03-12add hashsum support in apt-file download and add more testsMichael Vogt
2014-02-27initial version of apt-helperMichael Vogt
2014-02-27initial version of apt-helperMichael Vogt
2014-02-23test/integration/test-ubuntu-bug-346386-apt-get-update-paywall: use ↵Michael Vogt
http-method from METHODSDIR
2014-02-22skip test if "apt" is not buildMichael Vogt
2014-02-22fix ADT failure in downloadfile()Michael Vogt
2014-02-22add testcase for Bug#718329Michael Vogt
2014-02-22Fix typos in documentation (codespell)Michael Vogt
2014-02-14fix the test-kernel-helper-autoremove testcaseMichael Vogt
2014-02-14Additional test for the case when installed version != newest versionSteve Langasek