summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2016-07-22create non-existent files in edit-sources with 644 instead of 640David Kalnischkies
If the sources file we want to edit doesn't exist yet GetLock will create it with 640, which for a generic lockfile might be okay, but as this is a sources file more relaxed permissions are in order – and actually required as it wont be readable for unprivileged users causing warnings/errors in apt calls. Reported-By: J. Theede (musca) on IRC
2016-07-22tests: avoid time-dependent rebuild of cachesDavid Kalnischkies
The tests changes the sources.list and the modification time of this file is considered while figuring out if the cache can be good. Usually this isn't an issue, but in that case we have the cache generation produce warnings which appear twice in this case. Gbp-Dch: Ignore
2016-07-22clean up default-stanzas from extended_states on writeDavid Kalnischkies
The existing cleanup was happening only for packages which had a status change (install -> uninstalled) which is the most frequent but no the only case – you can e.g. set autobits explicitly with apt-mark. This would leave stanzas in the states file declaring a package to be manually installed – which is the default value for a package not listed at all, so we can just as well drop it from the file.
2016-07-22tests: skip over -flags for first option in autotestsDavid Kalnischkies
Otherwise calls like "apt -q install" end up calling "aptautotest_apt_q" instead of "aptautotest_apt_install" Gbp-Dch: Ignore
2016-07-22support "install ./foo.changes"David Kalnischkies
We support installing ./foo.deb (and ./foo.dsc for source) for a while now, but it can be a bit clunky to work with those directly if you e.g. build packages locally in a 'central' build-area. The changes files also include hashsums and can be signed, so this can also be considered an enhancement in terms of security as a user "just" has to verify the signature on the changes file then rather than checking all deb files individually in these manual installation procedures.
2016-07-22allow arch=all to override No-Support-for-Architecture-allDavid Kalnischkies
If a user explicitly requests the download of arch:all apt shouldn't get in the way and perform its detection dance if arch:all packages are (also) in arch:any files or not. This e.g. allows setting arch=all on a source with such a field (or one which doesn't support all at all, but has the arch:all files like Debian itself ATM) to get only the arch:all packages from there instead of behaving like a no-op. Reported-By: Helmut Grohne on IRC
2016-07-19don't hardcode /var/lib/dpkg/status as dir::state::statusDavid Kalnischkies
Theoretically it should be enough to change the Dir setting and have apt pick the dpkg/status file from that. Also, it should be consistently effected by RootDir. Both wasn't really the case through, so a user had to explicitly set it too (or ignore it and have or not have expected sideeffects caused by it). This commit tries to guess better the location of the dpkg/status file by setting dir::state::status to a naive "../dpkg/status", just that this setting would be interpreted as relative to the CWD and not relative to the dir::state directory. Also, the status file isn't really relative to the state files apt has in /var/lib/apt/ as evident if we consider that apt/ could be a symlink to someplace else and "../dpkg" not effected by it, so what we do here is an explicit replace on apt/ – similar to how we create directories if it ends in apt/ – with dpkg/. As this is a change it has the potential to cause regressions in so far as the dpkg/status file of the "host" system is no longer used if you set a "chroot" system via the Dir setting – but that tends to be intended and causes people to painfully figure out that they had to set this explicitly before, so that it now works more in terms of how the other Dir settings work (aka "as expected"). If using the host status file is really intended it is in fact easier to set this explicitely compared to setting the new "magic" location explicitely.
2016-07-19ensure Cnf::FindFile doesn't return files below /dev/nullDavid Kalnischkies
Very unlikely, but if the parent is /dev/null, the child empty and the grandchild a value we returned /dev/null/value which doesn't exist, so hardly a problem, but for best operability we should be consistent in our work and return /dev/null always.
2016-07-15tests: activate dpkg multi-arch even if test is single archDavid Kalnischkies
Most tests are either multiarch, do not care for the specific architecture or do not interact with dpkg, so really effect by this is only test-external-installation-planner-protocol, but its a general issue that while APT can be told to treat any architecture as native dpkg has the native architecture hardcoded so if we run tests we must make sure that dpkg knows about the architecture we will treat as "native" in apt as otherwise dpkg will refuse to install packages from such an architecture. This reverts f883d2c3675eae2700e4cd1532c1a236cae69a4e as it complicates the test slightly for no practical gain after the generic fix.
2016-07-15Use native arch in test-external-installation-planner-protocolJulian Andres Klode
Hardcoding amd64 broke the tests.
2016-07-08tests: fix external solver/planner directory setupDavid Kalnischkies
The setup didn't prepare the directories as expected by newer version of tthe external tests in an autopkgtests environment.
2016-07-08Add kernels with "+" in the package name to APT::NeverAutoRemoveAndrew Patterson
Escape "+" in kernel package names when generating APT::NeverAutoRemove list so it is not treated as a regular expression meta-character. [Changed by David Kalnischkies: let test actually test the change] Closes: #830159
2016-07-06don't change owner/perms/times through file:// symlinksDavid Kalnischkies
If we have files in partial/ from a previous invocation or similar such those could be symlinks created by file:// sources. The code is expecting only real files through and happily changes owner, modification times and permission on the file the symlink points to which tend to be files we have no business in touching in this way. Permissions of symlinks shouldn't be changed, changing owner is usually pointless to, but just to be sure we pick the easy way out and use lchown, check for symlinks before chmod/utimes. Reported-By: Mattia Rizzolo on IRC
2016-07-05tests: disable EIPP logging in test-compressed-indexesDavid Kalnischkies
The test makes heavy use of disabling compression types which are usually available some way or another like xz which is how the EIPP logs are compressed by default. Instead of changing this test to change the filename according to the compression we want to test we just disable EIPP logging for this test as that is easier and has the same practical effect. Gbp-Dch: Ignore
2016-07-05tests: allow setting environment in extra fileDavid Kalnischkies
It can be handy to set apt options for the testcases which shouldn't be accidentally committed like external planner testing or workarounds for local setups. Gbp-Dch: Ignore
2016-07-05Make the test case executableJulian Andres Klode
Gbp-Dch: ignore
2016-07-05indextargets: Check that cache could be built before using itJulian Andres Klode
This caused a crash because the cache was a nullptr. Closes: #829651
2016-07-02use +0000 instead of UTC by default as timezone in outputDavid Kalnischkies
All apt versions support numeric as well as 3-character timezones just fine and its actually hard to write code which doesn't "accidently" accepts it. So why change? Documenting the Date/Valid-Until fields in the Release file is easy to do in terms of referencing the datetime format used e.g. in the Debian changelogs (policy §4.4). This format specifies only the numeric timezones through, not the nowadays obsolete 3-character ones, so in the interest of least surprise we should use the same format even through it carries a small risk of regression in other clients (which encounter repositories created with apt-ftparchive). In case it is really regressing in practice, the hidden option -o APT::FTPArchive::Release::NumericTimezone=0 can be used to go back to good old UTC as timezone. The EDSP and EIPP protocols use this 'new' format, the text interface used to communicate with the acquire methods does not for compatibility reasons even if none of our methods would be effected and I doubt any other would (in these instances the timezone is 'GMT' as that is what HTTP/1.1 requires). Note that this is only true for apt talking to methods, (libapt-based) methods talking to apt will respond with the 'new' format. It is therefore strongly adviced to support both also in method input.
2016-07-01warn if apt-key is used in scripts/its output parsedDavid Kalnischkies
apt-key needs gnupg for most of its operations, but depending on it isn't very efficient as apt-key is hardly used by users – and scripts shouldn't use it to begin with as it is just a silly wrapper. To draw more attention on the fact that e.g. 'apt-key add' should not be used in favor of "just" dropping a keyring file into the trusted.gpg.d directory this commit implements the display of warnings.
2016-07-01do not treat same-version local debs as downgradeDavid Kalnischkies
As the volatile sources are parsed last they were sorted behind the dpkg/status file and hence are treated as a downgrade, which isn't really what you want to happen as from a user POV its an upgrade.
2016-07-01reinstalling local deb file is no downgradeDavid Kalnischkies
If we have a (e.g. locally built) deb file installed and do try to install it again apt complained about this being a downgrade, but it wasn't as it is the very same version… it was just confused into not merging the versions together which looks like a downgrade then. The same size assumption is usually good, but given that volatile files are parsed last (even after the status file) the base assumption no longer holds, but is easy to adept without actually changing anything in practice.
2016-07-01protect only the latest same-source providers from autoremoveDavid Kalnischkies
Traditionally all providers are protected providing something as apt can't know which of them is actually really providing the functionality for the user ensuring that we don't propose the removal of used stuff, but that is of course also keeping stuff around which could be removed. That can cause the collection of multiple old providers until the provided package is itself no longer needed (e.g. out-of-tree kernel modules). We combat this by marking providers only from the newest source package version so that old providers built by older versions of the same source package can be garbage collected.
2016-06-30tests: deduplicate package creation framework codeDavid Kalnischkies
Gbp-Dch: Ignore
2016-06-29don't do atomic overrides with failed filesDavid Kalnischkies
We deploy atomic renames for some files, but these renames also happen if something about the file failed which isn't really the point of the exercise… Closes: 828908
2016-06-29eipp: let apt make a plan, not make stuff planeDavid Kalnischkies
Julian noticed on IRC that I fall victim to a lovely false friend by calling referring to a 'planer' all the time even through these are machines to e.g. remove splinters from woodwork ("make stuff plane"). The term I meant is written in german in this way (= with a single n) but in english there are two, aka: 'planner'. As that is unreleased code switching all instances without any transitional provisions. Also the reason why its skipped in changelog. Thanks: Julian Andres Klode Gbp-Dch: Ignore
2016-06-27eipp: enable xz-compressed scenario loggingDavid Kalnischkies
In 385d9f2f23057bc5808b5e013e77ba16d1c94da4 I implemented the storage of scenario files based on enabling this by default for EIPP, but I implemented it first optionally for EDSP to have it independent. The reasons mentioned in the earlier commit (debugging and bugreports) obviously apply here, especially as EIPP solutions aren't user approved, nearly impossible to verify before starting the execution and at the time of error the scenario has changed already, so that reproducing the issue becomes hard(er).
2016-06-27eipp: include global errors in reported errorDavid Kalnischkies
Git-Dch: Ignore
2016-06-27eipp: properly handle arch-specific providesDavid Kalnischkies
The generation of the EIPP request was a bit to strict not generation what would actually be needed to be part of the scenario.
2016-06-27eipp: provide the internal planer as an external oneDavid Kalnischkies
Testing the current implementation can benefit from being able to be feed an EIPP request and produce a fully compliant response. It is also a great test for EIPP in general.
2016-06-27eipp: output at most two versions per packageDavid Kalnischkies
We can trim generation time and size of the EIPP scenario considerable if we we avoid telling the planers about "uninteresting" packages. This is one of the simpler but already very effective reductions: Do not tell planers about versions which are neither installed nor are to be installed as they have no effect on the plan we don't need to tell the planer about them. EDSP solvers need to know about all versions for better choice and error messages, but planers really don't. Git-Dch: Ignore
2016-06-27eipp: implement version 0.1 of the protocolDavid Kalnischkies
The very first step in introducing the "external installation planer protocol" (short: EIPP) as part of my GSoC2016 project. The description reads: APT-based tools like apt-get, aptitude, synaptic, … work with the user to figure out how their system should look like after they are done installing/removing packages and their dependencies. The actual installation/removal of packages is done by dpkg with the constrain that dependencies must be fulfilled at any point in time (e.g. to run maintainer scripts). Historically APT has a super micro-management approach to this task which hasn't aged that well over the years mostly ignoring changes in dpkg and growing into an unmaintainable mess hardly anyone can debug and everyone fears to touch – especially as more and more requirements are tacked onto it like handling cycles and triggers, dealing with "important" packages first, package sources on removable media, touch minimal groups to be able to interrupt the process if needed (e.g. unattended-upgrades) which not only sky-rocket complexity but also can be mutually exclusive as you e.g. can't have minimal groups and minimal trigger executions at the same time.
2016-06-27tests: add epoch-packages to try clean with epochsDavid Kalnischkies
Git-Dch: Ignore
2016-06-22add insecure (and weak) allow-options for sources.listDavid Kalnischkies
Weak had no dedicated option before and Insecure and Downgrade were both global options, which given the effect they all have on security is rather bad. Setting them for individual repositories only isn't great but at least slightly better and also more consistent with other settings for repositories.
2016-06-22add [weak] tag to hash errors to indicate insufficiencyDavid Kalnischkies
For "Hash Sum mismatch" that info doesn't make a whole lot of difference, but for the new insufficient info message an indicator that while this hashes are there and even match, they aren't enough from a security standpoint.
2016-06-22better error message for insufficient hashsumsDavid Kalnischkies
Downloading and saying "Hash Sum mismatch" isn't very friendly from a user POV, so with this change we try to detect such cases early on and report it, preferably before download even started. Closes: 827758
2016-06-22generalize secure->insecure downgrade protectionDavid Kalnischkies
Handling the extra check (and force requirement) for downgrades in security in our AllowInsecureRepositories checker helps in having this check everywhere instead of just in the most common place and requiring a little extra force in such cases is always good.
2016-06-22handle weak-security repositories as unauthenticatedDavid Kalnischkies
APT can be forced to deal with repositories which have no security features whatsoever, so just giving up on repositories which "just" fail our current criteria of good security features is the wrong incentive. Of course, repositories are better of fixing their setup to provide the minimum of security features, but sometimes this isn't possible: Historic repositories for example which do not change (anymore). That also fixes problem with repositories which are marked as trusted, but are providing only weak security features which would fail the parsing of the Release file. Closes: 827364
2016-06-22run update post-invokes even on (partial) failuresDavid Kalnischkies
Unsecure repositories result in error messages by default which causes the acquire run to fail hard, but non-failing repositories are still updated just like in the slightly less hard-failures which got this behaviour in 35664152e47a1d4d712fd52e0f0a2dc8ed359d32.
2016-06-20implement and document DIRECT for auto-detect-proxyDavid Kalnischkies
There is a subtile difference between an empty setting and "DIRECT" in the configuration as the later overrides the generic settings while the earlier does not. Also, non-zero exitcodes should really be reported as an error rather than silently discarded.
2016-06-20do not error if auto-detect-proxy cmd has no outputDavid Kalnischkies
Regression introduced in 8f858d560e3b7b475c623c4e242d1edce246025a. Commands are probably better of always having output through as the fall through to the generic proxy settings is likely not intended. As documenting and implementing this more consistently is kind of a regression through, it is split off into the next commit. Closes: 827713
2016-06-17avoid std::get_time usage to sidestep libstdc++6 bugDavid Kalnischkies
As reported upstream in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71556 the implementation of std::get_time is currently not as accepting as strptime is, especially in how hours should be formatted. Just reverting 9febc2b238e1e322dce1f94ecbed46d595893b52 would be possible, but then we would reopen the problems fixed by it, so instead I opted here for a rewrite of the parsing logic which makes this method a lot longer, but at least it provides the same benefits as the rewrite in std::get_time was intended to give us and decouples us from the fix of the issue in the standard library implementation of GCC. LP: 1593583
2016-06-17merge sources.list lines based on Release filenameDavid Kalnischkies
Merging by URI means that having sources lines with different URI methods results in 'strange' warning and error messages, which aren't very friendly from a user point of view as not encoding the method in the filename is effectivly an implementation detail. Merging by filename removes these messages and makes everything "work" even if it isn't working the way it is configured as the indexes aren't acquired over the method given, but over the first method for this release file (which argueably is an implementation detail stemming from the filename encoding, too). So either direction isn't perfectly "right", but personally I prefer "magic" over strange error messages (and doing a full-circle detection of this with its own messages which would need to be translated feels like way too much effort for dubious gain). Closes: 826944
2016-06-10don't leak an FD in lz4 (de)compressionDavid Kalnischkies
Seen first in #826783, but as this buglog also shows leaked uncompressed files as well we don't close it just yet.
2016-06-10do not hang on piped input in PipedFileFdPrivateDavid Kalnischkies
This effects only compressors configured on the fly (rather then the inbuilt ones as they use a library).
2016-06-08don't explicitly configure the last round of packagesDavid Kalnischkies
We end our operation by calling "dpkg --configure -a", so instead of running a (big) configure run with all packages mentioned explicitly before this, we simply skip them and let them be handled by this call implicitly. There isn't really an observeable gain to be had here from a speed point, but it helps in avoiding an (uncommon) problem of having a too long commandline passed to dpkg, which we would split up (probably incorrectly).
2016-06-08edsp: drop privileges before executing solversDavid Kalnischkies
Most (if not all) solvers should be able to run perfectly fine without root privileges as they get the entire state they are supposed to work on via stdin and do not perform any action directly, but just pass suggestions on via stdout. The new default is to run them all as _apt hence, but each solver can configure another user if it chooses/must. The security benefits are minimal at best, but it helps preventing silly mistakes (see 35f3ed061f10a25a3fb28bc988fddbb976344c4d) and that is always good. Note that our 'apt' and 'dump' solver already dropped privileges if they had them.
2016-06-08edsp: optionally store a compressed copy of the last scenarioDavid Kalnischkies
For bugreports and co it could be handy to have the scenario and all the settings used in it around later for inspection for EDSP like protocols. EDSP might not be the most interesting as the user can still interrupt the process before the solution is applied and users tend to have an opinion on the "rightness" of a solution, so it is disabled by default.
2016-06-04edsp: use an ID mapping for the internal solverDavid Kalnischkies
Currently an EDSP solver gets send basically all versions which means the absolute count is the same, but that might not be true forever (and with the skipping of rc-only versions it kinda is already) and even if it were true, segfaulting on bad input seems wrong.
2016-06-02apt-key: change to / before find to satisfy its CWD needsDavid Kalnischkies
First seen on hurd, but easily reproducible on all systems by removing the 'execution' bit from the current working directory and watching some tests (mostly the no-output expecting tests) fail due to find printing: "find: Failed to restore initial working directory: …" Samuel Thibault says in the bugreport: | To do its work, find first records the $PWD, then goes to | /etc/apt/trusted.gpg.d/ to find the files, and then goes back to $PWD. | | On Linux, getting $PWD from the 700 directory happens to work by luck | (POSIX says that getcwd can return [EACCES]: Search permission was denied | for the current directory, or read or search permission was denied for a | directory above the current directory in the file hierarchy). And going | back to $PWD fails, and thus find returns 1, but at least it emitted its | output. | | On Hurd, getting $PWD from the 700 directory fails, and find thus aborts | immediately, without emitting any output, and thus no keyring is found. | | So, to summarize, the issue is that since apt-get update runs find as a | non-root user, running it from a 700 directory breaks find. Solved as suggested by changing to '/' before running find, with some paranoia extra care taking to ensure the paths we give to find are really absolute paths first (they really should, but TMPDIR=. or a similar Dir::Etc::trustedparts setting could exist somewhere in the wild). The commit takes also the opportunity to make these lines slightly less error ignoring and the two find calls using (mostly) the same parameters. Thanks: Samuel Thibault for 'finding' the culprit! Closes: 826043
2016-06-02ignore std::locale exeception on non-existent "" localeDavid Kalnischkies
In 8b79c94af7f7cf2e5e5342294bc6e5a908cacabf changing to usage of C++ way of setting the locale causes us to be terminated in case of usage of an ungenerated locale as LC_ALL (or similar) – but we don't want to fail here, we just want to carry on as before with setlocale which we call in that case just for good measure.