| Age | Commit message (Collapse) | Author |
|---|
|
Otherwise the test run as root fails seeing the
W: Can't drop privileges for downloading as file 'foo_1.tar.gz' couldn't be
accessed by user '_apt'. - pkgAcquire::Run (13: Permission denied)
warning in a command which isn't supposed to warn.
One trivial test, two fixups and still counting…
Git-Dch: Ignore
|
|
Travis still uses a dpkg version which defaults to gz and as which
compression is picked isn't all to important as long as one is just
accept any.
Git-Dch: Ignore
|
|
This tests the fix for #812994, #813000
Gbp-Dch: ignore
|
|
Regression introduced in a249b3e6fd798935a02b769149c9791a6fa6ef16, which
in the case of an invalid cache would build the first part unlocked and
later pick up the (still unlocked) cache for further processing, so the
system got never locked and apt would end up complaining about being
unable to release the lock at shutdown.
The far more common case of having a valid cache worked as expected and
hence covered up the problem – especially as tests who would have
noticed it are simulations only, which do not lock.
Closes: 814139
Reported-By: Balint Reczey <balint@balintreczey.hu>
Reported-By: Helmut Grohne <helmut@subdivi.de> on IRC
|
|
|
|
We don't need the dependencies for obvious reasons and we don't need the
candidate version either, so building a pkgDepCache is wasted effort,
which we can stop doing now that build-dep cleared the path.
|
|
The later just calls the earlier, but the later needs the fullblown
dependency cache to be initialized, which is a very costly operation and
isn't done anymore that early in the run as we would need to throw away
and rebuild it again after we got all the information about source pkgs.
As we end up with a nullptr for the pkgDepCache, we use a slightly
longer calling convention to make sure that we use the pkgCache
directly, avoiding nullptr induced segfaults and costly operations.
Git-Dch: Ignore
Reported-By: Balint Reczey <balint@balintreczey.hu>
|
|
APT has a different understanding than dpkg (#748936) what matches and
what doesn't match an architecture specification as it isn't converting
back (and forward) to Debian triplets. That has to eventually be solved
some way or the other, but until that happens we change the matching in
apt so that porters can continue their work on non-gnu libc-ports even
if policy doesn't specify that yet (and dpkg just supporting it "by
accident" via triplets).
The initial patch was reformatted, fixed in terms of patterns containing
"any-any", dealing with expanding an arch without libc to gnu while a
pattern expands libc to any, the parsedepends test was fixed (the new
if's were inserted one step too early) and another test just for the
specifications added.
Closes: #812212
Thanks: Bálint Réczey for initial patch
|
|
Git-Dch: Ignore
|
|
The Date field in the Release file is useful to avoid allowing an
attacker to 'downgrade' a user to earlier Release files (and hence to
older states of the archieve with open security bugs). It is also needed
to allow a user to define min/max values for the validation of a Release
file (with or without the Release file providing a Valid-Until field).
APT wasn't formally requiring this field before through and (agrueable
not binding and still incomplete) online documentation declares it
optional (until now), so we downgrade the error to a warning for now to
give repository creators a bit more time to adapt – the bigger ones
should have a Date field for years already, so the effected group should
be small in any case.
It should be noted that earlier apt versions had this as an error
already, but only showed it if a Valid-Until field was present (or the
user tried to used the configuration items for min/max valid-until).
Closes: 809329
|
|
In 321213f0dcdcdaab04e01663e7a047b261400c9c Andreas Cadhalpun corrected
the incorrect overriding of earlier better-fitting results with later
(semi-)matches – but that broke the case in which packages are in multiple
releases in the same version (and the user has both releases configured).
Closes: 812497
|
|
In commit a221efc331693f8905da870141756c892911c433 I promoted the source
package name and version to the binary cache for faster access by e.g.
EDSP, but due to changing the interpretation length to soon we always
ignored the version part of the Source field, so that packages ended up
having the binary version as source version – which while usually just
fine it is wrong for binary rebuilds.
Closes: 812492
|
|
Avoid the dependency on a specific current path for the tar test and
ensure that _system is correctly initialized (gcc-6 runs into a segfault
otherwise and with it fixed starts to depend on the multi-arch
configuration of the running system… not good).
Git-Dch: Ignore
|
|
Git-Dch: Ignore
|
|
build-dep was implemented by parsing the build-dependencies of a package
and figuring out which packages to install/remove based on this. That
means that for the first level of dependencies build-dep was
implementing its very own resolver with all the benefits (aka: bugs)
this gives us for not using the existing resolver for all levels.
Making this work involves generating a dummy binary package with fitting
Depends and Conflicts and as we can't create them out of thin air the
cache generation needs to be involved so we end up writing a Packages
file which we want to parse – after we have parsed the other Packages
files already. With .dsc/.deb files we could add them before we started
parsing anything.
With a bit of care we can avoid generating too much data we have to
throw away again (as many parts assume that e.g. the count of packages
doesn't change midair), so that on a speed front there shouldn't be
much of a difference, but output can be slightly confusing as if we have
a completely valid cache on disk the "Reading package lists... Done" is
printed two times – but apt is pretty quick about it in that case.
Closes: #137560, #444930, #489911, #583914, #728317, #812173
|
|
To resolve dependencies like "pkg:arch" we create a package with the
name "pkg:arch" and the architecture "any". We create these packages
only if a dependency needs it as these kind of dependencies aren't that
common. This commit ensured that in the even this architecture specific
dependency is the only relation this package has we still create the
underlying package to have them available in provides resolution.
|
|
APT::StringView is supposed to be a temporary measure, until support
for the standardized string_view is widely available. Introducing
additional unstandardized features just makes porting to the
standard version harder.
The constexpr constructor also won't have any real effect on most
systems, as the compiler will happily optimise the strlen() call
away for constant strings.
Gbp-Dch: ignore
|
|
The commit also adds a few trivial tests
Git-Dch: Ignore
|
|
Introduced in 9d2a8a7388cf3b0bbbe92f6b0b30a533e1167f40 apt tries to
merge actions like downloading the same (as judged by hashes) file
into doing it once. The implementation was very simple in that it isn't
planing at all. Turns out that it works 90% of the time just fine, but
has issues in more complicated situations in which items can be in
different stages downloading different files emitting potentially the
"wrong" hash – like while pdiffs are worked on we might end up copying
the patch instead of the result file giving us very strange errors in
return. Reverting the change until we can implement a better planing
solution seems to be the best course of action even if its sad.
Closes: 810046
|
|
Architectures for packages which do not belong to the native nor a
foreign architecture (dubbed barbarian for now) which are marked
M-A:foreign still provide in their own architecture even if not for
others. Also, other M-A:foreign (and allowed) packages provide in these
barbarian architectures.
|
|
Closes: #734922
|
|
This prevents a test suite failure on systems with weird umasks.
Also set umask 000 at the beginning so we can actually check for
that anywhere.
Gbp-Dch: ignore
|
|
Just enabling it for anyone breaks with HTTP/1.0 servers and
proxies sometimes.
Closes: #810796
|
|
The code already deals with compressed leftovers, but forgot the
uncompressed files. The opertunity is picked to reorder this code and
add debug messages about the actions taken as well as produce such a
leftover file in the associated testcase.
|
|
With the addition of the $HASH-Download field in the .diff/Index we got
the size of the compressed patches for 'free', so if that information is
available we can use it for a more fitting calculation of the size
requirements of the patches vs. the complete file.
Note that this predicts a too small size in the transition case in which
the information isn't available for all patches, but figuring this out
would be a lot of code for practically nothing as only one update can
ever be in such a transition phase.
|
|
Some (older) versions of bash seem to be allergic to a method named
"aptautotest_grep_^apt" (note the caret). Unlikely that we are going to
write autotests for such commands so we could just skip those, but lets
instead just use "normal" characters in the names and strip the rest as
we already did with the (arguable more common) '-'.
|
|
This way it works more similar to the compressor binaries, which we
can relief in this way from their job in the test framework avoiding the
need of adding e.g. liblz4-tool to the test dependencies.
|
|
Downloading and storing are two different operations were different
compression types can be preferred. For downloading we provide the
choice via Acquire::CompressionTypes::Order as there is a choice to
be made between download size and speed – and limited by whats available
in the repository.
Storage on the other hand has all compressions currently supported by
apt available and to reduce runtime of tools accessing these files the
compression type should be a low-cost format in terms of decompression.
apt traditionally stores its indexes uncompressed on disk, but has
options to keep them compressed. Now that apt downloads additional files
we also deal with files which simply can't be stored uncompressed as
they are just too big (like Contents for apt-file). Traditionally they
are downloaded in a low-cost format (gz) as repositories do not provide
other formats, but there might be even lower-cost formats and for
download we could introduce higher-cost in the repositories.
Downloading an entire index potentially requires recompression to
another format, so an update takes potentially longer – but big files
are usually updated via pdiffs which has to de- and re-compress anyhow
and does it on the fly anyhow, so there is no extra time needed and in
general it seems to be benefitial to invest the time in update to save
time later on file access.
|
|
Less hardcoding should help while introducing new compressors.
Git-Dch: Ignore
|
|
There is no reason to enforce that the file we start the bootstrap with
is compressed with a compressor which is available online. This allows
us to change the on-disk format as well as deals with repositories
adding/removing support for a specific compressor.
|
|
Adding a new compressor method meant adding a new method as well – even
if that boilt down to just linking to our generalized decompressor with
a new name. That is unneeded busywork if we can instead just call the
generalized decompressor and let it figure out which compressor to use
based on the filenames rather than by program name.
For compatibility we ship still 'gzip', 'bzip2' and co, but they are
just links to our "new" 'store' method.
|
|
Gbp-Dch: ignore
|
|
This option controls if downloaded packages should be kept after
a successful install or if they should be deleted. The default
for "apt-get" is that they are kept (just like before).
However the default for "apt" is that they get deleted.
Closes: #160743
|
|
apt_preferences and deb822-style sources used the specialized class
pkgUserTagSection to deal with comments before/after a given stanza, but
it couldn't deal with comments in the stanza at all.
codesearch suggests that nobody else does and a vastely superior way of
working with potentially commented files is implemented now, so we can
officially discourage the use of the old incomplete hack class.
|
|
Now (55153bf94ff28a23318e79aa48242244c4d82b3c) that pkgTagFile can be
told to deal with all sorts of comments we can use this mode to parse
dsc (as by catch) and debian/control files properly even in the wake of
multiline fields spliced with comments like Build-Depends.
Closes: 806775
|
|
APT usually deals with perfectly formatted files generated automatically
be other programs – and as it has to parse multiple MBs of such files it
tries to be fast rather than forgiving.
This was always a problem if we reused this parser for files with a
deb822 syntax which are mostly written by hand however, like
apt_preferences or the deb822-style sources as these can include stray
newlines and more importantly comments all over the place.
As a stopgap we had pkgUserTagSection which deals at least with comments
before and after a given stanza, but comments in between weren't really
supported and now that we support parsing debian/control for e.g.
build-dep we face the full comment problem e.g. with comments inbetween
multi-line fields (like Build-Depends).
We can't easily deal with this on the pkgTagSection level as the interface
gives access to 'raw' char-pointers for performance reasons so we would
need to optionally add a buffer here on which we could remove comments
to hand out pointers into this buffer instead. The interface is quite
large already and supports writing stanzas as well, which does not
support comments at all either. So while in future it might make sense
to have a parser setup which deals with and keeps comments in this
commit we opt for the simpler solution for now: We officially declare
that pkgTagSection does not support comments and instead expect the
caller to deal with them, which in our case is pkgTagFile:
pkgTagFile is extended with an additional mode which can deal with
comments by dropping them from the buffer which will later form the
input of pkgTagSection. The actual implementation is slightly more
complex than this sentence suggests at first on one hand to have good
performance and on the other to allow jumping directly to stanzas with
offsets collected in a previous run (like our cache generation does it
for example).
|
|
This test relies on the ordering of the hash function.
|
|
Regression introduced in 8710a36a01c0cb1648926792c2ad05185535558e,
but such fields are unlikely in practice as it is just as simple to not
have a field at all with the same result of not having a value.
Closes: 808102
|
|
Debian has a Packages file for arch:all already, but the arch:any files
contain arch:all packages as well, so downloading it would be a total
waste of resources. Getting this solved is on the list of things to do,
but it is also the hardest part – for index targets like Contents the
situation is much easier and less server/client implementations are
involved so we might not want to stall them.
A repository can now declare via:
No-Support-for-Architecture-all: Packages
that even if an arch:all Packages exists, it shouldn't be downloaded, so
that support for Contents files can be added now.
See also 1dd20368486820efb6ef4476ad739e967174bec4 for the implementation
of downloading arch:all index targets, which this is limiting.
The field uses the name of the target from the apt configuration for
simplicity and is negative by design as this field is intended to be
supported/needed only for a "short" time (one or two Debian releases).
While this commit theoretically supports any target, its expected to
only see "Packages" as a value in reality.
|
|
We try to acquired the locks, but we didn't stop if we failed to get it…
Closes: 808561
|
|
The output changes slightly between different versions, which we already
dealt with in the main testcase for apt-key, but there are two more
which do not test both versions explicitly and so still had gpg1 output
to check against as this is the default at the moment.
Git-Dch: Ignore
|
|
apt-key creates internally a script (since ~1.1) which it will call to
avoid dealing with an array of different options in the code itself, but
while writing this script it wraps the values in "", which will cause
the shell to evaluate its content upon execution.
To make 'use' of this either set a absolute gpg command or TMPDIR to
something as interesting as:
"/tmp/This is fü\$\$ing cràzy, \$(man man | head -n1 | cut -d' ' -f1)\$!"
If such paths can be encountered in reality is a different question…
|
|
This doesn't allow all tests to run cleanly, but it at least allows to
write tests which could run successfully in such environments.
Git-Dch: Ignore
|
|
Testing /usr as TMPDIR assumes that GetTempDir() cannot use it
because it cannot write to it; this is true for non-root users, but
not so much for root.
Since root can access everything, perform this particular test case
only when not running as root.
Closes: #808383
|
|
This filters out errors due to timing issues. Early exits if
enough pulses occured.
|
|
This helps writing test cases. Also adapt the test case that
expected 64-bit.
Nothing changes performance wise, the distribution of the hash
values remains intact.
|
|
This makes the test suite work on 32 bit-long platforms.
Gbp-Dch: ignore
|
|
Use asprintf() so we have easy error detection and do not depend
on PATH_MAX.
Do not add another separator to the generated path, in both cases
the path inside the chroot is guaranteed to have a leading /
already.
Also pass -Wall to gcc.
|
|
This caused test-bug-717891-abolute-uris-for-proxies to fail
Gbp-Dch: ignore
|
|
This breaks a lot of test cases
Gbp-Dch: ignore
|
