| Age | Commit message (Collapse) | Author |
|---|
|
Introduces APT::Hashes::<NAME> with entries Untrusted and Weak
which can be set to true to cause the hash to be treated as
untrusted and/or weak.
|
|
Use msgtest and testsuccess with a function instead of failing
with a simple exit 1. This looks nicer.
Gbp-Dch: ignore
|
|
This gets rid of byte-range requests and 416 responses.
Gbp-Dch: ignore
|
|
This should make the test less flaky, as with a small file,
we might have already received all the data before trying
to apply rate limits which is a constant source of failure
on the i386 Ubuntu autopkgtest.
|
|
If the package is marked for removal, keep it marked for
removal and do not mark it for keep. If we mark it for keep,
we some how later get to a different stage where it is marked
for unpack instead of removal.
In the example in the bug report, we would get a:
SmartUnPack maas-region-controller-min:amd64 (replace version 2.0.0~alpha3+bzr4810-0ubuntu1 with Segmentation fault
maas-region-controller-min:amd64 was marked for removal, but
we changed it to keep and somehow it thinks that this is to
be replaced now instead of removed (probably because the
InstallVer != CandidateVer [with InstallVer = 0]).
This fixes a regression introduced in release 1.2.7, commit:
0390edd5452b081f8efcf412f96d535a1d959457
Reported-by: LaMont Jones on IRC
LP: #1562402
|
|
|
|
Our own gpgv method can declare a digest algorithm as untrusted and
handles these as worthless signatures. If gpgv comes with inbuilt
untrusted (which is called weak in official terminology) which it e.g.
does for MD5 in recent versions we should handle it in the same way.
To check this we use the most uncommon still fully trusted hash as a
configureable one via a hidden config option to toggle through all of
the three states a hash can be in.
|
|
Using erase(pos) is invalid in our case here as pos must be a valid and
derefenceable iterator, which isn't the case for an end-iterator (like
if we had no good signature).
The problem runs deeper still through as VALIDSIG is a keyid while
GOODSIG is just a longid so comparing them will always fail.
Closes: 818910
|
|
On launchpad #1558484 a user reports that @ in the authentication tokens
parsing of sources.list isn't working in an older (precise) version. It
isn't the recommended way of specifying passwords and co (auth.conf is),
but we can at least test for regressions (and in this case test at all…
who was that "clever" boy disabling a test with exit……… oh, nevermind.
Git-Dch: Ignore
|
|
Otherwise, things will just start failing later down the stack,
because (a) the lazy getters do not check if building was successful
and (b) any further getter call would return the invalid object
anyway.
Also initialize VS in pkgCache to nullptr by default.
Closes: #818628
|
|
There is no point in resolving all addresses to their names, this
just seriously slows the setup phase down. So just pass -n to not
resolve names anymore.
Gbp-Dch: ignore
|
|
This should make the test less flaky and hopefully fix the failure
on Ubuntu's armhf CI nodes.
Gbp-Dch: ignore
|
|
The test is a bit flaky. In order to get it less flaky, reduce
the speed in each run. To compensate for issues, start with a
higher speed level. Also increase the number of runs to 10.
Furthermore, http get the same multiple-run loop, and the log
files are changed to indicate the protocol being tested, as it's
not obvious which one fails if it fails in quiet mode.
Gbp-Dch: ignore
|
|
The epoch stripping in this code is done since day one, but in other
places we show a version epochs are not stripped. If epochs are present
in packages they tend to be an important information which we can't just
drop and especially can't drop "sometimes" as that confuses users and
tools alike – so even if removing code in use for (close to) 18 years
feels wrong, it is probably the right choice for consistency.
Closes: 818162
|
|
This makes it easier to understand what really is an error
and what not.
|
|
For the non-pdiff case, we have can have accurate progress
reporting because after fetching the {,In}Release files we know
how many IndexFiles will be fetched and what size they have.
Therefore init the filesize early (in pkgAcqIndex::Init) and
ensure that in Acquire::Pulse() looks at already downloaded
bits when calculating the progress in Acquire::Pulse.
Also improve debug output of Debug::acquire::progress
|
|
Git-Dch: Ignore
|
|
The problemresolver will set the candidate version for pkg P back
to the current version if it encounters an impossible to satisfy
critical dependency on P. However it did not set the State of
the package back as well which lead to a situation where P is
neither in Keep,Install,Upgrade,Delete state.
Note that this can not be tested via the traditional sh based
framework. I added a python-apt based test for this.
LP: #1550741
[jak@debian.org: Make the test not fail if apt_pkg cannot be
imported]
|
|
This was wrong and caused some issues because apt-key invoked
host apt-config with our library.
Gbp-Dch: ignore
|
|
This makes the test suite safe if we ever need to reject SHA1
signatures in an update.
|
|
The structure we parse the data into has a dedicated size field, but it
tends to be easier to handle it as a (very weak) checksum.
|
|
The URI descibing an item can change via mirrors/redirectors which
causes the .diff/Index files to get the wrong names in storage.
Git-Dch: Ignore
|
|
All other interactions with std::cout are flushed directly, just in the
stop case we hadn't done it – no problem expect if there is still output
coming after apt is done like in the case of a post-invoke script
producing output.
Closes: 793672
|
|
Iceweasel^WFirefox complains about the missing encoding in its console
which can be a bit annoying in interactive sessions, so fixing these
issues has no effect on apt itself, but on the testers.
Git-Dch: Ignore
|
|
Now that we ignore SHA1-only files it makes sense to require also the
provision of hashes for the compressed patches as this was introduced in
the same patchset as support for non-SHA1 hashes in the file itself in
dak and adding support in other archive creators (if they support pdiffs
at all) will likely be in the same batch.
The reason for the change itself is simple: If you are 'scared' enough
about the security of SHA1, you shouldn't uncompress a file you haven't
verified at all – after all, it could be exploiting a bug or a zip bomb.
|
|
Given that we refuse to use SHA1-only .diff/Indexes no point in shipping
and running code which pretends to check support for it which given that
all these tests are run 3 times eats a noticeable amount of time.
Git-Dch: Ignore
|
|
Ensure that .diff/Index files that only contain SHA1 values and no
SHA2 values are not used.
|
|
SHA1 is not reasonably secure anymore, so we should not consider it
usable anymore. The test suite is adjusted to account for this.
|
|
Using amd64 broke the test case on non-amd64 architectures. Query
the native architecture from dpkg and use that instead.
The definition of NATIVE is copied from the test
test-architecture-specification-parsing.
|
|
This effectively merges branch 'typofixes-vlajos-20150807' of github.com:vlajos/apt
with the following commit:
commit 13cacb3e2e2352ba701e769fc889e3344fabbf7e
Author: Veres Lajos <vlajos@gmail.com>
Date: Sun Aug 9 00:12:53 2015 +0100
typofix - https://github.com/vlajos/misspell_fixer
It has been rebased for a better commit message.
|
|
If a single pdiff fails, we have to fail the entire patching endeavour
and fall back to getting the complete file instead. That is easy in
serverside merged pdiffs as we get them one by one. For clientside we
get them all at once through, which means that a failure in one has to
stop the entire pipeline, which works as expected (as proven by the
bugreporters as they don't even notice it happening). The problem is
just that the first failing pdiff will do the cleanup, so another pdiff
which happens to be successfully acquired after we processed the failure
doesn't find the file it is supposed to use as a basename anymore, so
the patch is renamed to what should be the unique extension and moved
into the current working directory. Processing is then stopped as the
patch realizes that it isn't the last one which completed downloading.
On the plus side this means this is neither us using a bad temporary
location nor a security problem. It "just" overrides unconditionally
files in your current working directory (if you happen to have them
named like a pdiff patch – a bit unlikely perhaps) and so drops files
there which are never used again.
I guess this was introduced in 4e3c5633b1e74b4f58b95f339cfbbf4cbf21ab3e
for real as I made the need for the existence of the base file rather
explicit, but the potential lingers in the code for far longer.
Closes: #816837
|
|
Fixed in f7bd44bae0d7cb7f9838490b5eece075da83899e already, but the
commit misses the Closes tag and while we are at it we can add a simple
regression test and micro-optimize it a bit.
Thanks: James McCoy for the suggestion.
Closes: 816691
|
|
In a249b3e6fd798935a02b769149c9791a6fa6ef16 I dropped with the manual
first resolver step also the support for installing build-deps as
automatic in such a way that it behaved like this option was enabled by
default.
Restoring support for it means that we go back to mark build-
dependencies as manually installed again by default and provide this
option to keep them as automatically installed.
|
|
This way we hopefully notice (new) warnings in this little helper.
Git-Dch: Ignore
|
|
Changelogs are relatively small and we have no hashes for them, but we
had partial support for them before, so lets stick to it.
This also deletes the (partial) file before moving the downloaded file
into its place – rename(2) should be doing this by itself, but testing
on semaphoreci suggests that this isn't always the case (error is "Stale
file handle") and we don't need an atomic replace here, so be explicit.
Git-Dch: Ignore
|
|
If the architecture list is empty somehow, fail normally.
LP: #1549819
|
|
The EDSP output generated by apt didn't include the versioned provides
information so that every provides looked like an unversioned one in the
eyes of an external resolver.
|
|
pkgAcqChangelog has the default behaviour of downloading a changelog to
a temporary directory (inside /tmp, not /tmp directly), which is cleaned
up on shutdown, but this can be overridden to store the changelog more
permanently – but that caries a permission problem.
For changelog we can 'easily' solve this by always downloading to a
temporary directory and only move it out of there on done.
|
|
If pkgAcqChangelog is told to acquire the changelog for a version it
will check first if this version is installed on the disk and if so will
use the local changelog in /usr/share/doc (possibily/likely gz
compressed) instead of downloading the file from the web.
An option is provided to disable this, which is enabled by default for
the Ubuntu vendor as they truncate the local changelogs – and for apts
--print-uris action.
|
|
Otherwise the test run as root fails seeing the
W: Can't drop privileges for downloading as file 'foo_1.tar.gz' couldn't be
accessed by user '_apt'. - pkgAcquire::Run (13: Permission denied)
warning in a command which isn't supposed to warn.
One trivial test, two fixups and still counting…
Git-Dch: Ignore
|
|
Travis still uses a dpkg version which defaults to gz and as which
compression is picked isn't all to important as long as one is just
accept any.
Git-Dch: Ignore
|
|
This tests the fix for #812994, #813000
Gbp-Dch: ignore
|
|
Regression introduced in a249b3e6fd798935a02b769149c9791a6fa6ef16, which
in the case of an invalid cache would build the first part unlocked and
later pick up the (still unlocked) cache for further processing, so the
system got never locked and apt would end up complaining about being
unable to release the lock at shutdown.
The far more common case of having a valid cache worked as expected and
hence covered up the problem – especially as tests who would have
noticed it are simulations only, which do not lock.
Closes: 814139
Reported-By: Balint Reczey <balint@balintreczey.hu>
Reported-By: Helmut Grohne <helmut@subdivi.de> on IRC
|
|
|
|
We don't need the dependencies for obvious reasons and we don't need the
candidate version either, so building a pkgDepCache is wasted effort,
which we can stop doing now that build-dep cleared the path.
|
|
The later just calls the earlier, but the later needs the fullblown
dependency cache to be initialized, which is a very costly operation and
isn't done anymore that early in the run as we would need to throw away
and rebuild it again after we got all the information about source pkgs.
As we end up with a nullptr for the pkgDepCache, we use a slightly
longer calling convention to make sure that we use the pkgCache
directly, avoiding nullptr induced segfaults and costly operations.
Git-Dch: Ignore
Reported-By: Balint Reczey <balint@balintreczey.hu>
|
|
APT has a different understanding than dpkg (#748936) what matches and
what doesn't match an architecture specification as it isn't converting
back (and forward) to Debian triplets. That has to eventually be solved
some way or the other, but until that happens we change the matching in
apt so that porters can continue their work on non-gnu libc-ports even
if policy doesn't specify that yet (and dpkg just supporting it "by
accident" via triplets).
The initial patch was reformatted, fixed in terms of patterns containing
"any-any", dealing with expanding an arch without libc to gnu while a
pattern expands libc to any, the parsedepends test was fixed (the new
if's were inserted one step too early) and another test just for the
specifications added.
Closes: #812212
Thanks: Bálint Réczey for initial patch
|
|
Git-Dch: Ignore
|
|
The Date field in the Release file is useful to avoid allowing an
attacker to 'downgrade' a user to earlier Release files (and hence to
older states of the archieve with open security bugs). It is also needed
to allow a user to define min/max values for the validation of a Release
file (with or without the Release file providing a Valid-Until field).
APT wasn't formally requiring this field before through and (agrueable
not binding and still incomplete) online documentation declares it
optional (until now), so we downgrade the error to a warning for now to
give repository creators a bit more time to adapt – the bigger ones
should have a Date field for years already, so the effected group should
be small in any case.
It should be noted that earlier apt versions had this as an error
already, but only showed it if a Valid-Until field was present (or the
user tried to used the configuration items for min/max valid-until).
Closes: 809329
|
|
In 321213f0dcdcdaab04e01663e7a047b261400c9c Andreas Cadhalpun corrected
the incorrect overriding of earlier better-fitting results with later
(semi-)matches – but that broke the case in which packages are in multiple
releases in the same version (and the user has both releases configured).
Closes: 812497
|
