path: root/doc/external-installation-planer-protocol.txt

# APT External Installation Planer Protocol (EIPP) - version 0.1

This document describes the communication protocol between APT and
external installation planer. The protocol is called APT EIPP, for "APT
External Installation Planer Protocol".


## Terminology

In the following we use the term **architecture qualified package name**
(or *arch-qualified package names* for short) to refer to package
identifiers of the form "package:arch" where "package" is a package name
and "arch" a dpkg architecture.


## Components

- **APT**: we know this one.
- APT is equipped with its own **internal planer** for the order of
  package installation (and removal) which is identified by the string
  `internal`.
- **External planer**: an *external* software component able to plan an
  installation on behalf of APT.

At each interaction with APT, a single planer is in use.  When there is
a total of 2 or more planers, internals or externals, the user can
choose which one to use.

Each planer is identified by an unique string, the **planer name**.
Planer names must be formed using only alphanumeric ASCII characters,
dashes, and underscores; planer names must start with a lowercase ASCII
letter.  The special name `internal` denotes APT's internal planer, is
reserved, and cannot be used by external planers.


## Installation

Each external planer is installed as a file under Dir::Bin::Planers (see
below), which defaults to `/usr/lib/apt/planers`. We will assume in the
remainder of this section that such a default value is in effect.

The naming scheme is `/usr/lib/apt/planers/NAME`, where `NAME` is the
name of the external planer.

Each file under `/usr/lib/apt/planers` corresponding to an external
planer must be executable.

No non-planer files must be installed under `/usr/lib/apt/planers`, so
that an index of available external planers can be obtained by listing
the content of that directory.


## Configuration

Several APT options can be used to affect installation planing in APT.
An overview of them is given below. Please refer to proper APT
configuration documentation for more, and more up to date, information.

- **APT::Planer**: the name of the planer to be used for dependency
  solving. Defaults to `internal`

- **Dir::Bin::Planers**: absolute path of the directory where to look
  for external solvers. Defaults to `/usr/lib/apt/planers`.


## Protocol

When configured to use an external planer, APT will resort to it to
decide in which order packages should be installed, configured and
removed.

The interaction happens **in batch**: APT will invoke the external
planer passing the current status of (half-)installed packages and of
packages which should be installed, as well as a request denoting the
packages to install, reinstall, remove and purge.  The external planer
will compute a valid plan of when and how to call the low-level package
manager (like dpkg) with each package to satisfy the request.

External planers are invoked by executing them. Communications happens
via the file descriptors: **stdin** (standard input) and **stdout**
(standard output). stderr is not used by the EIPP protocol. Planers can
therefore use stderr to dump debugging information that could be
inspected separately.

After invocation, the protocol passes through a sequence of phases:

1. APT invokes the external planer
2. APT send to the planer an installation planer **scenario**
3. The planer calculates the order. During this phase the planer may
   send, repeatedly, **progress** information to APT.
4. The planer sends back to APT an **answer**, i.e. either a *solution*
   or an *error* report.
5. The external planer exits


### Scenario

A scenario is a text file encoded in a format very similar to the "Deb
822" format (AKA "the format used by Debian `Packages` files"). A
scenario consists of two distinct parts: a **request** and a **package
universe**, occurring in that order. The request consists of a single
Deb 822 stanza, while the package universe consists of several such
stanzas. All stanzas occurring in a scenario are separated by an empty
line.


#### Request

Within an installation planer scenario, a request represents the action
on packages requested by the user explicitly as well as potentially
additions calculated by a dependency resolver which the user has
accepted.

An installation planer is not allowed to suggest the modification of
package states (e.g. removing additional packages) even if it can't
calculate a solution otherwise – the planer must error out in such
a case. An exception is made for scenarios which contain packages which
aren't completely installed (like half-installed or trigger-awaiting):
Solvers are free to move these packages to a fully installed state (but
are still forbidden to remove them).

A request is a single Deb 822 stanza opened by a mandatory Request field
and followed by a mixture of action, preference, and global
configuration fields.

The value of the **Request:** field is a string describing the EIPP
protocol which will be used to communicate and especially which answers
APT will understand. At present, the string must be `EIPP 0.1`. Request
fields are mainly used to identify the beginning of a request stanza;
their actual values are otherwise not used by the EIPP protocol.

The following **configuration fields** are supported in request stanzas:

- **Architecture:** (mandatory) The name of the *native* architecture on
  the user machine (see also: `dpkg --print-architecture`)

- **Architectures:** (optional, defaults to the native architecture) A
  space separated list of *all* architectures known to APT (this is
  roughly equivalent to the union of `dpkg --print-architecture` and
  `dpkg --print-foreign-architectures`)

The following **action fields** are supported in request stanzas:

- **Install:** (optional, defaults to the empty string) A space
  separated list of arch-qualified package names, with *no version
  attached*, to install. This field denotes a list of packages that the
  user wants to install, usually via an APT `install` request.

- **Remove:** (optional, defaults to the empty string) Same syntax of
  Install. This field denotes a list of packages that the user wants to
  remove, usually via APT `remove` or `purge` requests.

- **ReInstall:** (optional, defaults to the empty string) Same syntax of
  Install. This field denotes a list of packages which are installed,
  but should be reinstalled again e.g. because files shipped by that
  package were removed or corrupted accidentally, usually requested via
  an APT `install` request with the `--reinstall` flag.

The following **preference fields** are supported in request stanzas:

- **Planer:** (optional, defaults to the empty string) a purely
  informational string specifying to which planer this request was send
  initially.

- *Immediate-Configuration:** (option, unset by default) A boolean value
  defining if the planer should try to configure all packages as quickly
  as possible (true) or shouldn't perform any kind of immediate
  configuration at all (false). If not explicitly set with this field
  the planer is free to pick either mode or implementing e.g. a mode
  which configures only packages immediately if they are flagged as
  `Essential` (or are dependencies of packages marked as `Essential`).


#### Package universe

A package universe is a list of Deb 822 stanzas, one per package, called
**package stanzas**. Each package stanzas starts with a Package
field. The following fields are supported in package stanzas:

- The fields Package, Version, Architecture (all mandatory) and
  Multi-Arch, Pre-Depends, Depends, Conflicts, Breaks, Essential
  (optional) as they are contained in the dpkg database (see the manpage
  `dpkg-query (1)`).

- **Status:** (optional, defaults to `uninstalled`). Allowed values are
  the "package status" names as listed in `dpkg-query (1)` and visible
  e.g. in the dpkg database as the second value in the space separated
  list of values in the Status field there. In other words: Neither
  desired action nor error flags are present in this field in EIPP!

- **APT-ID:** (mandatory). Unique package identifier, according to APT.


### Answer

An answer from the external planer to APT is either a *solution* or an
*error*.

The following invariant on **exit codes** must hold true. When the
external planer is *able to find a solution*, it will write the solution
to standard output and then exit with an exit code of 0. When the
external planer is *unable to find a solution* (and is aware of that),
it will write an error to standard output and then exit with an exit
code of 0.  An exit code other than 0 will be interpreted as a planer
crash with no meaningful error about dependency resolution to convey to
the user.


#### Solution

  TODO


#### Error

An error is a single Deb 822 stanza, starting the field Error. The
following fields are supported in error stanzas:

- **Error:** (mandatory). The value of this field is ignored, although
  it should be a unique error identifier, such as a UUID.

- **Message:** (mandatory). The value of this field is a text string,
  meant to be read by humans, that explains the cause of the planer
  error.  Message fields might be multi-line, like the Description field
  in the dpkg database. The first line conveys a short message, which
  can be explained in more details using subsequent lines.


### Progress

During dependency solving, an external planer may send progress
information to APT using **progress stanzas**. A progress stanza starts
with the Progress field and might contain the following fields:

- **Progress:** (mandatory). The value of this field is a date and time
  timestamp, in RFC 2822 format. The timestamp provides a time
  annotation for the progress report.

- **Percentage:** (optional). An integer from 0 to 100, representing the
  completion of the installation planning process, as declared by the
  planer.

- **Message:** (optional). A textual message, meant to be read by the
  APT user, telling what is going on within the installation planer
  (e.g. the current phase of planning, as declared by the planer).


# Future extensions

Potential future extensions to this protocol are to be discussed on
deity@lists.debian.org.