diff options
Diffstat (limited to 'data/vim/patches/8.1.1000')
-rw-r--r-- | data/vim/patches/8.1.1000 | 439 |
1 files changed, 0 insertions, 439 deletions
diff --git a/data/vim/patches/8.1.1000 b/data/vim/patches/8.1.1000 deleted file mode 100644 index 2eacb772a..000000000 --- a/data/vim/patches/8.1.1000 +++ /dev/null @@ -1,439 +0,0 @@ -To: vim_dev@googlegroups.com -Subject: Patch 8.1.1000 -Fcc: outbox -From: Bram Moolenaar <Bram@moolenaar.net> -Mime-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit ------------- - -Patch 8.1.1000 -Problem: Indenting is off. -Solution: Make indenting consistent and update comments. (Ozaki Kiichi, - closes #4079) -Files: src/getchar.c, src/ops.c - - -*** ../vim-8.1.0999/src/getchar.c 2019-02-17 17:44:36.207875527 +0100 ---- src/getchar.c 2019-03-09 08:53:59.569644721 +0100 -*************** -*** 1577,1684 **** - } - else - { -! mod_mask = 0x0; -! last_recorded_len = 0; -! for (;;) /* this is done twice if there are modifiers */ -! { -! int did_inc = FALSE; -! -! if (mod_mask -! #if defined(FEAT_XIM) && defined(FEAT_GUI_GTK) -! || im_is_preediting() -! #endif -! ) -! { -! /* no mapping after modifier has been read */ -! ++no_mapping; -! ++allow_keys; -! did_inc = TRUE; /* mod_mask may change value */ -! } -! c = vgetorpeek(TRUE); -! if (did_inc) - { -! --no_mapping; -! --allow_keys; -! } - -! /* Get two extra bytes for special keys */ -! if (c == K_SPECIAL -! #ifdef FEAT_GUI -! || c == CSI - #endif -! ) -! { -! int save_allow_keys = allow_keys; -! -! ++no_mapping; -! allow_keys = 0; /* make sure BS is not found */ -! c2 = vgetorpeek(TRUE); /* no mapping for these chars */ - c = vgetorpeek(TRUE); -! --no_mapping; -! allow_keys = save_allow_keys; -! if (c2 == KS_MODIFIER) - { -! mod_mask = c; -! continue; - } -- c = TO_SPECIAL(c2, c); - -! #if defined(FEAT_GUI_MSWIN) && defined(FEAT_MENU) && defined(FEAT_TEAROFF) -! /* Handle K_TEAROFF here, the caller of vgetc() doesn't need to -! * know that a menu was torn off */ -! if (c == K_TEAROFF) - { -! char_u name[200]; -! int i; - -! /* get menu path, it ends with a <CR> */ -! for (i = 0; (c = vgetorpeek(TRUE)) != '\r'; ) - { -! name[i] = c; -! if (i < 199) -! ++i; - } -- name[i] = NUL; -- gui_make_tearoff(name); -- continue; -- } - #endif - #if defined(FEAT_GUI) && defined(FEAT_GUI_GTK) && defined(FEAT_MENU) -! /* GTK: <F10> normally selects the menu, but it's passed until -! * here to allow mapping it. Intercept and invoke the GTK -! * behavior if it's not mapped. */ -! if (c == K_F10 && gui.menubar != NULL) -! { -! gtk_menu_shell_select_first(GTK_MENU_SHELL(gui.menubar), FALSE); -! continue; -! } - #endif - #ifdef FEAT_GUI -! /* Handle focus event here, so that the caller doesn't need to -! * know about it. Return K_IGNORE so that we loop once (needed if -! * 'lazyredraw' is set). */ -! if (c == K_FOCUSGAINED || c == K_FOCUSLOST) -! { -! ui_focus_change(c == K_FOCUSGAINED); -! c = K_IGNORE; -! } - -! /* Translate K_CSI to CSI. The special key is only used to avoid -! * it being recognized as the start of a special key. */ -! if (c == K_CSI) -! c = CSI; - #endif -! } -! /* a keypad or special function key was not mapped, use it like -! * its ASCII equivalent */ -! switch (c) -! { -! case K_KPLUS: c = '+'; break; -! case K_KMINUS: c = '-'; break; -! case K_KDIVIDE: c = '/'; break; -! case K_KMULTIPLY: c = '*'; break; -! case K_KENTER: c = CAR; break; -! case K_KPOINT: - #ifdef MSWIN - // Can be either '.' or a ',', - // depending on the type of keypad. ---- 1577,1685 ---- - } - else - { -! mod_mask = 0x0; -! last_recorded_len = 0; -! for (;;) // this is done twice if there are modifiers - { -! int did_inc = FALSE; - -! if (mod_mask -! #if defined(FEAT_XIM) && defined(FEAT_GUI_GTK) -! || im_is_preediting() - #endif -! ) -! { -! // no mapping after modifier has been read -! ++no_mapping; -! ++allow_keys; -! did_inc = TRUE; // mod_mask may change value -! } - c = vgetorpeek(TRUE); -! if (did_inc) - { -! --no_mapping; -! --allow_keys; - } - -! // Get two extra bytes for special keys -! if (c == K_SPECIAL -! #ifdef FEAT_GUI -! || c == CSI -! #endif -! ) - { -! int save_allow_keys = allow_keys; - -! ++no_mapping; -! allow_keys = 0; // make sure BS is not found -! c2 = vgetorpeek(TRUE); // no mapping for these chars -! c = vgetorpeek(TRUE); -! --no_mapping; -! allow_keys = save_allow_keys; -! if (c2 == KS_MODIFIER) - { -! mod_mask = c; -! continue; -! } -! c = TO_SPECIAL(c2, c); -! -! #if defined(FEAT_GUI_MSWIN) && defined(FEAT_MENU) && defined(FEAT_TEAROFF) -! // Handle K_TEAROFF here, the caller of vgetc() doesn't need to -! // know that a menu was torn off -! if (c == K_TEAROFF) -! { -! char_u name[200]; -! int i; -! -! // get menu path, it ends with a <CR> -! for (i = 0; (c = vgetorpeek(TRUE)) != '\r'; ) -! { -! name[i] = c; -! if (i < 199) -! ++i; -! } -! name[i] = NUL; -! gui_make_tearoff(name); -! continue; - } - #endif - #if defined(FEAT_GUI) && defined(FEAT_GUI_GTK) && defined(FEAT_MENU) -! // GTK: <F10> normally selects the menu, but it's passed until -! // here to allow mapping it. Intercept and invoke the GTK -! // behavior if it's not mapped. -! if (c == K_F10 && gui.menubar != NULL) -! { -! gtk_menu_shell_select_first( -! GTK_MENU_SHELL(gui.menubar), FALSE); -! continue; -! } - #endif - #ifdef FEAT_GUI -! // Handle focus event here, so that the caller doesn't need to -! // know about it. Return K_IGNORE so that we loop once (needed -! // if 'lazyredraw' is set). -! if (c == K_FOCUSGAINED || c == K_FOCUSLOST) -! { -! ui_focus_change(c == K_FOCUSGAINED); -! c = K_IGNORE; -! } - -! // Translate K_CSI to CSI. The special key is only used to -! // avoid it being recognized as the start of a special key. -! if (c == K_CSI) -! c = CSI; - #endif -! } -! // a keypad or special function key was not mapped, use it like -! // its ASCII equivalent -! switch (c) -! { -! case K_KPLUS: c = '+'; break; -! case K_KMINUS: c = '-'; break; -! case K_KDIVIDE: c = '/'; break; -! case K_KMULTIPLY: c = '*'; break; -! case K_KENTER: c = CAR; break; -! case K_KPOINT: - #ifdef MSWIN - // Can be either '.' or a ',', - // depending on the type of keypad. -*************** -*** 1686,1704 **** - #else - c = '.'; break; - #endif -! case K_K0: c = '0'; break; -! case K_K1: c = '1'; break; -! case K_K2: c = '2'; break; -! case K_K3: c = '3'; break; -! case K_K4: c = '4'; break; -! case K_K5: c = '5'; break; -! case K_K6: c = '6'; break; -! case K_K7: c = '7'; break; -! case K_K8: c = '8'; break; -! case K_K9: c = '9'; break; - -! case K_XHOME: -! case K_ZHOME: if (mod_mask == MOD_MASK_SHIFT) - { - c = K_S_HOME; - mod_mask = 0; ---- 1687,1705 ---- - #else - c = '.'; break; - #endif -! case K_K0: c = '0'; break; -! case K_K1: c = '1'; break; -! case K_K2: c = '2'; break; -! case K_K3: c = '3'; break; -! case K_K4: c = '4'; break; -! case K_K5: c = '5'; break; -! case K_K6: c = '6'; break; -! case K_K7: c = '7'; break; -! case K_K8: c = '8'; break; -! case K_K9: c = '9'; break; - -! case K_XHOME: -! case K_ZHOME: if (mod_mask == MOD_MASK_SHIFT) - { - c = K_S_HOME; - mod_mask = 0; -*************** -*** 1711,1718 **** - else - c = K_HOME; - break; -! case K_XEND: -! case K_ZEND: if (mod_mask == MOD_MASK_SHIFT) - { - c = K_S_END; - mod_mask = 0; ---- 1712,1719 ---- - else - c = K_HOME; - break; -! case K_XEND: -! case K_ZEND: if (mod_mask == MOD_MASK_SHIFT) - { - c = K_S_END; - mod_mask = 0; -*************** -*** 1726,1770 **** - c = K_END; - break; - -! case K_XUP: c = K_UP; break; -! case K_XDOWN: c = K_DOWN; break; -! case K_XLEFT: c = K_LEFT; break; -! case K_XRIGHT: c = K_RIGHT; break; -! } - -! /* For a multi-byte character get all the bytes and return the -! * converted character. -! * Note: This will loop until enough bytes are received! -! */ -! if (has_mbyte && (n = MB_BYTE2LEN_CHECK(c)) > 1) -! { -! ++no_mapping; -! buf[0] = c; -! for (i = 1; i < n; ++i) - { -! buf[i] = vgetorpeek(TRUE); -! if (buf[i] == K_SPECIAL - #ifdef FEAT_GUI -! || buf[i] == CSI - #endif -! ) -! { -! /* Must be a K_SPECIAL - KS_SPECIAL - KE_FILLER sequence, -! * which represents a K_SPECIAL (0x80), -! * or a CSI - KS_EXTRA - KE_CSI sequence, which represents -! * a CSI (0x9B), -! * of a K_SPECIAL - KS_EXTRA - KE_CSI, which is CSI too. */ -! c = vgetorpeek(TRUE); -! if (vgetorpeek(TRUE) == (int)KE_CSI && c == KS_EXTRA) -! buf[i] = CSI; - } - } -- --no_mapping; -- c = (*mb_ptr2char)(buf); -- } - -! break; -! } - } - - #ifdef FEAT_EVAL ---- 1727,1771 ---- - c = K_END; - break; - -! case K_XUP: c = K_UP; break; -! case K_XDOWN: c = K_DOWN; break; -! case K_XLEFT: c = K_LEFT; break; -! case K_XRIGHT: c = K_RIGHT; break; -! } - -! // For a multi-byte character get all the bytes and return the -! // converted character. -! // Note: This will loop until enough bytes are received! -! if (has_mbyte && (n = MB_BYTE2LEN_CHECK(c)) > 1) - { -! ++no_mapping; -! buf[0] = c; -! for (i = 1; i < n; ++i) -! { -! buf[i] = vgetorpeek(TRUE); -! if (buf[i] == K_SPECIAL - #ifdef FEAT_GUI -! || buf[i] == CSI - #endif -! ) -! { -! // Must be a K_SPECIAL - KS_SPECIAL - KE_FILLER -! // sequence, which represents a K_SPECIAL (0x80), -! // or a CSI - KS_EXTRA - KE_CSI sequence, which -! // represents a CSI (0x9B), -! // or a K_SPECIAL - KS_EXTRA - KE_CSI, which is CSI -! // too. -! c = vgetorpeek(TRUE); -! if (vgetorpeek(TRUE) == (int)KE_CSI && c == KS_EXTRA) -! buf[i] = CSI; -! } - } -+ --no_mapping; -+ c = (*mb_ptr2char)(buf); - } - -! break; -! } - } - - #ifdef FEAT_EVAL -*** ../vim-8.1.0999/src/ops.c 2019-03-08 09:50:43.058308765 +0100 ---- src/ops.c 2019-03-09 09:06:12.268015674 +0100 -*************** -*** 1245,1254 **** - emsg(_(e_nolastcmd)); - return FAIL; - } -! VIM_CLEAR(new_last_cmdline); /* don't keep the cmdline containing @: */ -! /* Escape all control characters with a CTRL-V */ - p = vim_strsave_escaped_ext(last_cmdline, -! (char_u *)"\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037", Ctrl_V, FALSE); - if (p != NULL) - { - /* When in Visual mode "'<,'>" will be prepended to the command. ---- 1245,1259 ---- - emsg(_(e_nolastcmd)); - return FAIL; - } -! // don't keep the cmdline containing @: -! VIM_CLEAR(new_last_cmdline); -! // Escape all control characters with a CTRL-V - p = vim_strsave_escaped_ext(last_cmdline, -! (char_u *)"\001\002\003\004\005\006\007" -! "\010\011\012\013\014\015\016\017" -! "\020\021\022\023\024\025\026\027" -! "\030\031\032\033\034\035\036\037", -! Ctrl_V, FALSE); - if (p != NULL) - { - /* When in Visual mode "'<,'>" will be prepended to the command. -*** ../vim-8.1.0999/src/version.c 2019-03-08 09:50:43.062308735 +0100 ---- src/version.c 2019-03-09 09:01:15.642242661 +0100 -*************** -*** 781,782 **** ---- 781,784 ---- - { /* Add new patch number below this line */ -+ /**/ -+ 1000, - /**/ - --- -I started out with nothing, and I still have most of it. - -- Michael Davis -- "Tonight Show" - - /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ -/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ -\\\ an exciting new programming language -- http://www.Zimbu.org /// - \\\ help me help AIDS victims -- http://ICCF-Holland.org /// |