Update files

3 files changed, 90 insertions, 50 deletions

diff --git a/doc/po/apt-doc.pot b/doc/po/apt-doc.pot
index ddd9d025e..aeb624948 100644
--- a/doc/po/apt-doc.pot
+++ b/doc/po/apt-doc.pot
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2009-09-24 15:02+0300\n"
+"POT-Creation-Date: 2009-09-26 11:35+0300\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -1836,8 +1836,8 @@ msgid ""
 "<command>apt-ftparchive</command> <arg><option>-hvdsq</option></arg> "
 "<arg><option>--md5</option></arg> <arg><option>--delink</option></arg> "
 "<arg><option>--readonly</option></arg> "
-"<arg><option>--contents</option></arg> <arg><option>-o=<replaceable>config "
-"string</replaceable></option></arg> "
+"<arg><option>--contents</option></arg> <arg><option>-o "
+"<replaceable>config</replaceable>=<replaceable>string</replaceable></option></arg> "
 "<arg><option>-c=<replaceable>file</replaceable></option></arg> <group "
 "choice=\"req\"> <arg>packages<arg choice=\"plain\" "
 "rep=\"repeat\"><replaceable>path</replaceable></arg><arg><replaceable>override</replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> "
@@ -4298,9 +4298,9 @@ msgstr ""
 msgid ""
 "The #clear command is the only way to delete a list or a complete scope.  "
 "Reopening a scope or the ::-style described below will "
-"<emphasis>not</emphasis> override previewsly written entries. Only options "
-"can be overridden by adressing a new value to it - lists and scopes can't be "
-"overridden, only cleared."
+"<emphasis>not</emphasis> override previously written entries. Only options "
+"can be overridden by addressing a new value to it - lists and scopes can't "
+"be overridden, only cleared."
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
@@ -4311,7 +4311,7 @@ msgid ""
 "full option name (<literal>APT::Get::Assume-Yes</literal> for instance) "
 "followed by an equals sign then the new value of the option. Lists can be "
 "appended too by adding a trailing :: to the list name. (As you might "
-"suspect: The scope syntax can't be used on the commandline.)"
+"suspect: The scope syntax can't be used on the command line.)"
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
@@ -4598,7 +4598,7 @@ msgid ""
 "The used bandwidth can be limited with "
 "<literal>Acquire::http::Dl-Limit</literal> which accepts integer values in "
 "kilobyte. The default value is 0 which deactivates the limit and tries uses "
-"as much as possible of the bandwith (Note that this option implicit "
+"as much as possible of the bandwidth (Note that this option implicit "
 "deactivates the download from multiple servers at the same time.)"
 msgstr ""
 
@@ -4797,7 +4797,7 @@ msgid ""
 "checked: If this setting exists the method will only be used if this file "
 "exists, e.g. for the bzip2 method (the inbuilt) setting is <placeholder "
 "type=\"literallayout\" id=\"0\"/> Note also that list entries specified on "
-"the commandline will be added at the end of the list specified in the "
+"the command line will be added at the end of the list specified in the "
 "configuration files, but before the default entries. To prefer a type in "
 "this case over the ones specified in in the configuration files you can set "
 "the option direct - not in list style.  This will not override the defined "
@@ -5057,7 +5057,7 @@ msgid ""
 "in between his own run. Activating these options can therefore decrease the "
 "time needed to perform the install / upgrade. Note that it is intended to "
 "activate these options per default in the future, but as it changes the way "
-"APT calling dpkg drastical it needs a lot more testing.  <emphasis>These "
+"APT calling dpkg drastically it needs a lot more testing.  <emphasis>These "
 "options are therefore currently experimental and should not be used in "
 "productive environments.</emphasis> Also it breaks the progress reporting so "
 "all frontends will currently stay around half (or more) of the time in the "
@@ -5077,7 +5077,7 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><refsect2><para>
 #: apt.conf.5.xml:506
 msgid ""
-"Note that it is not garanteed that APT will support these options or that "
+"Note that it is not guaranteed that APT will support these options or that "
 "these options will not cause (big) trouble in the future. If you have "
 "understand the current risks and problems with these options, but are brave "
 "enough to help testing them create a new configuration file and test a "
@@ -5170,7 +5170,7 @@ msgid ""
 "As the configuration can be deferred to be done at the end by dpkg it can be "
 "tried to order the unpack series only by critical needs, e.g. by "
 "Pre-Depends. Default is true and therefore the \"old\" method of ordering in "
-"verious steps by everything. While both method were present in earlier APT "
+"various steps by everything. While both method were present in earlier APT "
 "versions the <literal>OrderCritical</literal> method was unused, so this "
 "method is very experimental and needs further improvements before becoming "
 "really useful."
@@ -5201,10 +5201,10 @@ msgid ""
 "upgrade process as these these configure calls require currently also "
 "<literal>DPkg::TriggersPending</literal> which will run quite a few triggers "
 "(which maybe not needed). Essentials get per default a high score but the "
-"immediate flag is relativly low (a package which has a Pre-Depends is higher "
-"rated).  These option and the others in the same group can be used to change "
-"the scoring. The following example shows the settings with there default "
-"values.  <placeholder type=\"literallayout\" id=\"0\"/>"
+"immediate flag is relatively low (a package which has a Pre-Depends is "
+"higher rated).  These option and the others in the same group can be used to "
+"change the scoring. The following example shows the settings with there "
+"default values.  <placeholder type=\"literallayout\" id=\"0\"/>"
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
diff --git a/doc/po/fr.po b/doc/po/fr.po
index 461638080..541fd369f 100644
--- a/doc/po/fr.po
+++ b/doc/po/fr.po
@@ -9,7 +9,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
-"POT-Creation-Date: 2009-09-24 15:02+0300\n"
+"POT-Creation-Date: 2009-09-26 11:35+0300\n"
 "PO-Revision-Date: 2009-09-14 20:15+0200\n"
 "Last-Translator: Christian Perrier <bubulle@debian.org>\n"
 "Language-Team: French <debian-l10n-french@lists.debian.org>\n"
@@ -2424,14 +2424,34 @@ msgstr "Outil de création de fichiers d'index"
 
 #. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis>
 #: apt-ftparchive.1.xml:36
+#, fuzzy
+#| msgid ""
+#| "<command>apt-ftparchive</command> <arg><option>-hvdsq</option></arg> "
+#| "<arg><option>--md5</option></arg> <arg><option>--delink</option></arg> "
+#| "<arg><option>--readonly</option></arg> <arg><option>--contents</option></"
+#| "arg> <arg><option>-o=<replaceable>config string</replaceable></option></"
+#| "arg> <arg><option>-c=<replaceable>file</replaceable></option></arg> "
+#| "<group choice=\"req\"> <arg>packages<arg choice=\"plain\" rep=\"repeat"
+#| "\"><replaceable>path</replaceable></arg><arg><replaceable>override</"
+#| "replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> "
+#| "<arg>sources<arg choice=\"plain\" rep=\"repeat\"><replaceable>path</"
+#| "replaceable></arg><arg><replaceable>override</"
+#| "replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> "
+#| "<arg>contents <arg choice=\"plain\"><replaceable>path</replaceable></"
+#| "arg></arg> <arg>release <arg choice=\"plain\"><replaceable>path</"
+#| "replaceable></arg></arg> <arg>generate <arg choice=\"plain"
+#| "\"><replaceable>config-file</replaceable></arg> <arg choice=\"plain\" rep="
+#| "\"repeat\"><replaceable>section</replaceable></arg></arg> <arg>clean <arg "
+#| "choice=\"plain\"><replaceable>config-file</replaceable></arg></arg> </"
+#| "group>"
 msgid ""
 "<command>apt-ftparchive</command> <arg><option>-hvdsq</option></arg> "
 "<arg><option>--md5</option></arg> <arg><option>--delink</option></arg> "
 "<arg><option>--readonly</option></arg> <arg><option>--contents</option></"
-"arg> <arg><option>-o=<replaceable>config string</replaceable></option></arg> "
-"<arg><option>-c=<replaceable>file</replaceable></option></arg> <group choice="
-"\"req\"> <arg>packages<arg choice=\"plain\" rep=\"repeat"
-"\"><replaceable>path</replaceable></arg><arg><replaceable>override</"
+"arg> <arg><option>-o <replaceable>config</replaceable>=<replaceable>string</"
+"replaceable></option></arg> <arg><option>-c=<replaceable>file</replaceable></"
+"option></arg> <group choice=\"req\"> <arg>packages<arg choice=\"plain\" rep="
+"\"repeat\"><replaceable>path</replaceable></arg><arg><replaceable>override</"
 "replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> "
 "<arg>sources<arg choice=\"plain\" rep=\"repeat\"><replaceable>path</"
 "replaceable></arg><arg><replaceable>override</"
@@ -5721,8 +5741,8 @@ msgstr ""
 msgid ""
 "The #clear command is the only way to delete a list or a complete scope.  "
 "Reopening a scope or the ::-style described below will <emphasis>not</"
-"emphasis> override previewsly written entries. Only options can be "
-"overridden by adressing a new value to it - lists and scopes can't be "
+"emphasis> override previously written entries. Only options can be "
+"overridden by addressing a new value to it - lists and scopes can't be "
 "overridden, only cleared."
 msgstr ""
 
@@ -5741,7 +5761,7 @@ msgid ""
 "full option name (<literal>APT::Get::Assume-Yes</literal> for instance) "
 "followed by an equals sign then the new value of the option. Lists can be "
 "appended too by adding a trailing :: to the list name. (As you might "
-"suspect: The scope syntax can't be used on the commandline.)"
+"suspect: The scope syntax can't be used on the command line.)"
 msgstr ""
 "Tous les outils d'APT possèdent une option <option>-o</option> qui permet de "
 "spécifier une configuration quelconque depuis la ligne de commande. La "
@@ -6129,7 +6149,7 @@ msgid ""
 "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</"
 "literal> which accepts integer values in kilobyte. The default value is 0 "
 "which deactivates the limit and tries uses as much as possible of the "
-"bandwith (Note that this option implicit deactivates the download from "
+"bandwidth (Note that this option implicit deactivates the download from "
 "multiple servers at the same time.)"
 msgstr ""
 
@@ -6396,7 +6416,7 @@ msgid ""
 "replaceable></literal> will be checked: If this setting exists the method "
 "will only be used if this file exists, e.g. for the bzip2 method (the "
 "inbuilt) setting is <placeholder type=\"literallayout\" id=\"0\"/> Note also "
-"that list entries specified on the commandline will be added at the end of "
+"that list entries specified on the command line will be added at the end of "
 "the list specified in the configuration files, but before the default "
 "entries. To prefer a type in this case over the ones specified in in the "
 "configuration files you can set the option direct - not in list style.  This "
@@ -6749,7 +6769,7 @@ msgid ""
 "in between his own run. Activating these options can therefore decrease the "
 "time needed to perform the install / upgrade. Note that it is intended to "
 "activate these options per default in the future, but as it changes the way "
-"APT calling dpkg drastical it needs a lot more testing.  <emphasis>These "
+"APT calling dpkg drastically it needs a lot more testing.  <emphasis>These "
 "options are therefore currently experimental and should not be used in "
 "productive environments.</emphasis> Also it breaks the progress reporting so "
 "all frontends will currently stay around half (or more) of the time in the "
@@ -6769,7 +6789,7 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><refsect2><para>
 #: apt.conf.5.xml:506
 msgid ""
-"Note that it is not garanteed that APT will support these options or that "
+"Note that it is not guaranteed that APT will support these options or that "
 "these options will not cause (big) trouble in the future. If you have "
 "understand the current risks and problems with these options, but are brave "
 "enough to help testing them create a new configuration file and test a "
@@ -6862,7 +6882,7 @@ msgid ""
 "As the configuration can be deferred to be done at the end by dpkg it can be "
 "tried to order the unpack series only by critical needs, e.g. by Pre-"
 "Depends. Default is true and therefore the \"old\" method of ordering in "
-"verious steps by everything. While both method were present in earlier APT "
+"various steps by everything. While both method were present in earlier APT "
 "versions the <literal>OrderCritical</literal> method was unused, so this "
 "method is very experimental and needs further improvements before becoming "
 "really useful."
@@ -6893,10 +6913,10 @@ msgid ""
 "upgrade process as these these configure calls require currently also "
 "<literal>DPkg::TriggersPending</literal> which will run quite a few triggers "
 "(which maybe not needed). Essentials get per default a high score but the "
-"immediate flag is relativly low (a package which has a Pre-Depends is higher "
-"rated).  These option and the others in the same group can be used to change "
-"the scoring. The following example shows the settings with there default "
-"values.  <placeholder type=\"literallayout\" id=\"0\"/>"
+"immediate flag is relatively low (a package which has a Pre-Depends is "
+"higher rated).  These option and the others in the same group can be used to "
+"change the scoring. The following example shows the settings with there "
+"default values.  <placeholder type=\"literallayout\" id=\"0\"/>"
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
diff --git a/doc/po/ja.po b/doc/po/ja.po
index fc1fec09e..ca5ccef2b 100644
--- a/doc/po/ja.po
+++ b/doc/po/ja.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2009-09-24 15:02+0300\n"
+"POT-Creation-Date: 2009-09-26 11:35+0300\n"
 "PO-Revision-Date: 2009-07-30 22:55+0900\n"
 "Last-Translator: KURASAWA Nozomu <nabetaro@caldron.jp>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -2501,14 +2501,34 @@ msgstr "インデックスファイル生成ユーティリティ"
 # type: Content of: <refentry><refsynopsisdiv><cmdsynopsis>
 #. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis>
 #: apt-ftparchive.1.xml:36
+#, fuzzy
+#| msgid ""
+#| "<command>apt-ftparchive</command> <arg><option>-hvdsq</option></arg> "
+#| "<arg><option>--md5</option></arg> <arg><option>--delink</option></arg> "
+#| "<arg><option>--readonly</option></arg> <arg><option>--contents</option></"
+#| "arg> <arg><option>-o=<replaceable>config string</replaceable></option></"
+#| "arg> <arg><option>-c=<replaceable>file</replaceable></option></arg> "
+#| "<group choice=\"req\"> <arg>packages<arg choice=\"plain\" rep=\"repeat"
+#| "\"><replaceable>path</replaceable></arg><arg><replaceable>override</"
+#| "replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> "
+#| "<arg>sources<arg choice=\"plain\" rep=\"repeat\"><replaceable>path</"
+#| "replaceable></arg><arg><replaceable>override</"
+#| "replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> "
+#| "<arg>contents <arg choice=\"plain\"><replaceable>path</replaceable></"
+#| "arg></arg> <arg>release <arg choice=\"plain\"><replaceable>path</"
+#| "replaceable></arg></arg> <arg>generate <arg choice=\"plain"
+#| "\"><replaceable>config-file</replaceable></arg> <arg choice=\"plain\" rep="
+#| "\"repeat\"><replaceable>section</replaceable></arg></arg> <arg>clean <arg "
+#| "choice=\"plain\"><replaceable>config-file</replaceable></arg></arg> </"
+#| "group>"
 msgid ""
 "<command>apt-ftparchive</command> <arg><option>-hvdsq</option></arg> "
 "<arg><option>--md5</option></arg> <arg><option>--delink</option></arg> "
 "<arg><option>--readonly</option></arg> <arg><option>--contents</option></"
-"arg> <arg><option>-o=<replaceable>config string</replaceable></option></arg> "
-"<arg><option>-c=<replaceable>file</replaceable></option></arg> <group choice="
-"\"req\"> <arg>packages<arg choice=\"plain\" rep=\"repeat"
-"\"><replaceable>path</replaceable></arg><arg><replaceable>override</"
+"arg> <arg><option>-o <replaceable>config</replaceable>=<replaceable>string</"
+"replaceable></option></arg> <arg><option>-c=<replaceable>file</replaceable></"
+"option></arg> <group choice=\"req\"> <arg>packages<arg choice=\"plain\" rep="
+"\"repeat\"><replaceable>path</replaceable></arg><arg><replaceable>override</"
 "replaceable><arg><replaceable>pathprefix</replaceable></arg></arg></arg> "
 "<arg>sources<arg choice=\"plain\" rep=\"repeat\"><replaceable>path</"
 "replaceable></arg><arg><replaceable>override</"
@@ -5904,8 +5924,8 @@ msgstr ""
 msgid ""
 "The #clear command is the only way to delete a list or a complete scope.  "
 "Reopening a scope or the ::-style described below will <emphasis>not</"
-"emphasis> override previewsly written entries. Only options can be "
-"overridden by adressing a new value to it - lists and scopes can't be "
+"emphasis> override previously written entries. Only options can be "
+"overridden by addressing a new value to it - lists and scopes can't be "
 "overridden, only cleared."
 msgstr ""
 
@@ -5925,7 +5945,7 @@ msgid ""
 "full option name (<literal>APT::Get::Assume-Yes</literal> for instance) "
 "followed by an equals sign then the new value of the option. Lists can be "
 "appended too by adding a trailing :: to the list name. (As you might "
-"suspect: The scope syntax can't be used on the commandline.)"
+"suspect: The scope syntax can't be used on the command line.)"
 msgstr ""
 "すべての APT ツールで、コマンドラインで任意の設定を行う -o オプションが使用で"
 "きます。文法は、完全なオプション名 (例: <literal>APT::Get::Assume-Yes</"
@@ -6323,7 +6343,7 @@ msgid ""
 "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</"
 "literal> which accepts integer values in kilobyte. The default value is 0 "
 "which deactivates the limit and tries uses as much as possible of the "
-"bandwith (Note that this option implicit deactivates the download from "
+"bandwidth (Note that this option implicit deactivates the download from "
 "multiple servers at the same time.)"
 msgstr ""
 
@@ -6577,7 +6597,7 @@ msgid ""
 "replaceable></literal> will be checked: If this setting exists the method "
 "will only be used if this file exists, e.g. for the bzip2 method (the "
 "inbuilt) setting is <placeholder type=\"literallayout\" id=\"0\"/> Note also "
-"that list entries specified on the commandline will be added at the end of "
+"that list entries specified on the command line will be added at the end of "
 "the list specified in the configuration files, but before the default "
 "entries. To prefer a type in this case over the ones specified in in the "
 "configuration files you can set the option direct - not in list style.  This "
@@ -6941,7 +6961,7 @@ msgid ""
 "in between his own run. Activating these options can therefore decrease the "
 "time needed to perform the install / upgrade. Note that it is intended to "
 "activate these options per default in the future, but as it changes the way "
-"APT calling dpkg drastical it needs a lot more testing.  <emphasis>These "
+"APT calling dpkg drastically it needs a lot more testing.  <emphasis>These "
 "options are therefore currently experimental and should not be used in "
 "productive environments.</emphasis> Also it breaks the progress reporting so "
 "all frontends will currently stay around half (or more) of the time in the "
@@ -6961,7 +6981,7 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><refsect2><para>
 #: apt.conf.5.xml:506
 msgid ""
-"Note that it is not garanteed that APT will support these options or that "
+"Note that it is not guaranteed that APT will support these options or that "
 "these options will not cause (big) trouble in the future. If you have "
 "understand the current risks and problems with these options, but are brave "
 "enough to help testing them create a new configuration file and test a "
@@ -7057,7 +7077,7 @@ msgid ""
 "As the configuration can be deferred to be done at the end by dpkg it can be "
 "tried to order the unpack series only by critical needs, e.g. by Pre-"
 "Depends. Default is true and therefore the \"old\" method of ordering in "
-"verious steps by everything. While both method were present in earlier APT "
+"various steps by everything. While both method were present in earlier APT "
 "versions the <literal>OrderCritical</literal> method was unused, so this "
 "method is very experimental and needs further improvements before becoming "
 "really useful."
@@ -7088,10 +7108,10 @@ msgid ""
 "upgrade process as these these configure calls require currently also "
 "<literal>DPkg::TriggersPending</literal> which will run quite a few triggers "
 "(which maybe not needed). Essentials get per default a high score but the "
-"immediate flag is relativly low (a package which has a Pre-Depends is higher "
-"rated).  These option and the others in the same group can be used to change "
-"the scoring. The following example shows the settings with there default "
-"values.  <placeholder type=\"literallayout\" id=\"0\"/>"
+"immediate flag is relatively low (a package which has a Pre-Depends is "
+"higher rated).  These option and the others in the same group can be used to "
+"change the scoring. The following example shows the settings with there "
+"default values.  <placeholder type=\"literallayout\" id=\"0\"/>"
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>