diff options
Diffstat (limited to 'data/vim/patches/8.1.1281')
-rw-r--r-- | data/vim/patches/8.1.1281 | 267 |
1 files changed, 0 insertions, 267 deletions
diff --git a/data/vim/patches/8.1.1281 b/data/vim/patches/8.1.1281 deleted file mode 100644 index 41204b841..000000000 --- a/data/vim/patches/8.1.1281 +++ /dev/null @@ -1,267 +0,0 @@ -To: vim_dev@googlegroups.com -Subject: Patch 8.1.1281 -Fcc: outbox -From: Bram Moolenaar <Bram@moolenaar.net> -Mime-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit ------------- - -Patch 8.1.1281 -Problem: Cannot specify a count with :chistory. -Solution: Add a count to :chistory and :lhistory. (Yegappan Lakshmanan, - closes #4344) -Files: runtime/doc/quickfix.txt, src/ex_cmds.h, src/quickfix.c, - src/testdir/test_quickfix.vim - - -*** ../vim-8.1.1280/runtime/doc/quickfix.txt 2019-05-05 18:11:46.320590639 +0200 ---- runtime/doc/quickfix.txt 2019-05-05 20:51:22.585954153 +0200 -*************** -*** 139,146 **** - :[count]lab[ove] Same as ":cabove", except the location list for the - current window is used instead of the quickfix list. - -! *:cbe* *:cbelow* -! :[count]cbe[low] Go to the [count] error below the current line in the - current buffer. If [count] is omitted, then 1 is - used. If there are no errors, then an error message - is displayed. Assumes that the entries in a quickfix ---- 139,146 ---- - :[count]lab[ove] Same as ":cabove", except the location list for the - current window is used instead of the quickfix list. - -! *:cbel* *:cbelow* -! :[count]cbel[ow] Go to the [count] error below the current line in the - current buffer. If [count] is omitted, then 1 is - used. If there are no errors, then an error message - is displayed. Assumes that the entries in a quickfix -*************** -*** 164,171 **** - number of entries before the current position, then - the first error in the file is selected. - -! *:lbef* *:lbefore* -! :[count]lbef[ore] Same as ":cbefore", except the location list for the - current window is used instead of the quickfix list. - - *:caf* *:cafter* ---- 164,171 ---- - number of entries before the current position, then - the first error in the file is selected. - -! *:lbe* *:lbefore* -! :[count]lbe[fore] Same as ":cbefore", except the location list for the - current window is used instead of the quickfix list. - - *:caf* *:cafter* -*************** -*** 536,541 **** ---- 536,564 ---- - etc. - < Otherwise it works the same as `:ldo`. - -+ FILTERING A QUICKFIX OR LOCATION LIST: -+ *cfilter-plugin* *:Cfilter* *:Lfilter* -+ If you have too many entries in a quickfix list, you can use the cfilter -+ plugin to reduce the number of entries. Load the plugin with: > -+ -+ packadd cfilter -+ -+ Then you can use the following commands to filter a quickfix/location list: > -+ -+ :Cfilter[!] /{pat}/ -+ :Lfilter[!] /{pat}/ -+ -+ The |:Cfilter| command creates a new quickfix list from the entries matching -+ {pat} in the current quickfix list. {pat} is a Vim |regular-expression| -+ pattern. Both the file name and the text of the entries are matched against -+ {pat}. If the optional ! is supplied, then the entries not matching {pat} are -+ used. The pattern can be optionally enclosed using one of the following -+ characters: ', ", /. If the pattern is empty, then the last used search -+ pattern is used. -+ -+ The |:Lfilter| command does the same as |:Cfilter| but operates on the current -+ location list. -+ - ============================================================================= - 2. The error window *quickfix-window* - -*************** -*** 822,835 **** - the current window instead of the quickfix list. - - *:chistory* *:chi* -! :chi[story] Show the list of error lists. The current list is - marked with ">". The output looks like: - error list 1 of 3; 43 errors ~ - > error list 2 of 3; 0 errors ~ - error list 3 of 3; 15 errors ~ - - *:lhistory* *:lhi* -! :lhi[story] Show the list of location lists, otherwise like - `:chistory`. - - When adding a new error list, it becomes the current list. ---- 845,863 ---- - the current window instead of the quickfix list. - - *:chistory* *:chi* -! :[count]chi[story] Show the list of error lists. The current list is - marked with ">". The output looks like: - error list 1 of 3; 43 errors ~ - > error list 2 of 3; 0 errors ~ - error list 3 of 3; 15 errors ~ - -+ When [count] is given, then the count'th quickfix -+ list is made the current list. Example: > -+ " Make the 4th quickfix list current -+ :4chistory -+ < - *:lhistory* *:lhi* -! :[count]lhi[story] Show the list of location lists, otherwise like - `:chistory`. - - When adding a new error list, it becomes the current list. -*************** -*** 1641,1662 **** - recognized as a command separator. The backslash before each space is - required for the set command. - -- *cfilter-plugin* *:Cfilter* *:Lfilter* -- If you have too many matching messages, you can use the cfilter plugin to -- reduce the number of entries. Load the plugin with: > -- packadd cfilter -- -- Then you can use these command: > -- :Cfilter[!] /{pat}/ -- :Lfilter[!] /{pat}/ -- -- :Cfilter creates a new quickfix list from entries matching {pat} in the -- current quickfix list. Both the file name and the text of the entries are -- matched against {pat}. If ! is supplied, then entries not matching {pat} are -- used. -- -- :Lfilter does the same as :Cfilter but operates on the current location list. -- - ============================================================================= - 8. The directory stack *quickfix-directory-stack* - ---- 1669,1674 ---- -*** ../vim-8.1.1280/src/ex_cmds.h 2019-05-05 15:02:26.176319819 +0200 ---- src/ex_cmds.h 2019-05-05 20:48:37.758956072 +0200 -*************** -*** 336,343 **** - RANGE|BUFNAME|COUNT|EXTRA|TRLBAR, - ADDR_OTHER), - EX(CMD_chistory, "chistory", qf_history, -! TRLBAR, -! ADDR_NONE), - EX(CMD_clist, "clist", qf_list, - BANG|EXTRA|TRLBAR|CMDWIN, - ADDR_NONE), ---- 336,343 ---- - RANGE|BUFNAME|COUNT|EXTRA|TRLBAR, - ADDR_OTHER), - EX(CMD_chistory, "chistory", qf_history, -! RANGE|COUNT|TRLBAR, -! ADDR_UNSIGNED), - EX(CMD_clist, "clist", qf_list, - BANG|EXTRA|TRLBAR|CMDWIN, - ADDR_NONE), -*************** -*** 828,835 **** - EXTRA|NOTRLCOM|NEEDARG, - ADDR_NONE), - EX(CMD_lhistory, "lhistory", qf_history, -! TRLBAR, -! ADDR_NONE), - EX(CMD_ll, "ll", ex_cc, - RANGE|COUNT|TRLBAR|BANG, - ADDR_QUICKFIX), ---- 828,835 ---- - EXTRA|NOTRLCOM|NEEDARG, - ADDR_NONE), - EX(CMD_lhistory, "lhistory", qf_history, -! RANGE|COUNT|TRLBAR, -! ADDR_UNSIGNED), - EX(CMD_ll, "ll", ex_cc, - RANGE|COUNT|TRLBAR|BANG, - ADDR_QUICKFIX), -*** ../vim-8.1.1280/src/quickfix.c 2019-05-05 15:02:26.180319795 +0200 ---- src/quickfix.c 2019-05-05 20:48:37.762956047 +0200 -*************** -*** 3742,3747 **** ---- 3742,3768 ---- - qf_info_T *qi = qf_cmd_get_stack(eap, FALSE); - int i; - -+ if (eap->addr_count > 0) -+ { -+ if (qi == NULL) -+ { -+ emsg(_(e_loclist)); -+ return; -+ } -+ -+ // Jump to the specified quickfix list -+ if (eap->line2 > 0 && eap->line2 <= qi->qf_listcount) -+ { -+ qi->qf_curlist = eap->line2 - 1; -+ qf_msg(qi, qi->qf_curlist, ""); -+ qf_update_buffer(qi, NULL); -+ } -+ else -+ emsg(_(e_invrange)); -+ -+ return; -+ } -+ - if (qf_stack_empty(qi)) - msg(_("No entries")); - else -*** ../vim-8.1.1280/src/testdir/test_quickfix.vim 2019-05-05 15:02:26.180319795 +0200 ---- src/testdir/test_quickfix.vim 2019-05-05 20:48:37.762956047 +0200 -*************** -*** 1831,1839 **** ---- 1831,1853 ---- - call assert_equal(' error list 2 of 3; 2 ' . common, res[1]) - call assert_equal('> error list 3 of 3; 3 ' . common, res[2]) - -+ " Test for changing the quickfix lists -+ call assert_equal(3, g:Xgetlist({'nr' : 0}).nr) -+ exe '1' . a:cchar . 'hist' -+ call assert_equal(1, g:Xgetlist({'nr' : 0}).nr) -+ exe '3' . a:cchar . 'hist' -+ call assert_equal(3, g:Xgetlist({'nr' : 0}).nr) -+ call assert_fails('-2' . a:cchar . 'hist', 'E16:') -+ call assert_fails('4' . a:cchar . 'hist', 'E16:') -+ - call g:Xsetlist([], 'f') - let l = split(execute(a:cchar . 'hist'), "\n") - call assert_equal('No entries', l[0]) -+ if a:cchar == 'c' -+ call assert_fails('4chist', 'E16:') -+ else -+ call assert_fails('4lhist', 'E776:') -+ endif - - " An empty list should still show the stack history - call g:Xsetlist([]) -*** ../vim-8.1.1280/src/version.c 2019-05-05 18:11:46.336590548 +0200 ---- src/version.c 2019-05-05 20:59:35.150902389 +0200 -*************** -*** 769,770 **** ---- 769,772 ---- - { /* Add new patch number below this line */ -+ /**/ -+ 1281, - /**/ - --- -Every exit is an entrance into something else. - - /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ -/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ -\\\ an exciting new programming language -- http://www.Zimbu.org /// - \\\ help me help AIDS victims -- http://ICCF-Holland.org /// |